scholarly journals Utilization of Pharmaceutical Technology Methods for the Development of Innovative Porous Metasilicate Pellets with a Very High Specific Surface Area for Chemical Warfare Agents Detection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1860
Author(s):  
Jiří Zeman ◽  
Sylvie Pavloková ◽  
David Vetchý ◽  
Adam Staňo ◽  
Zdeněk Moravec ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Uv Light ◽  
Detection System ◽  
Chemical Warfare Agents ◽  
High Specific Surface Area ◽  
Ammonium Bicarbonate ◽  
Toxic Substances ◽  
Pharmaceutical Technology

Pharmaceutical technology offers various dosage forms that can be applied interdisciplinary. One of them are spherical pellets which could be utilized as a carrier in emerging second-generation detection tubes. This detection system requires carriers with high specific surface area (SSA), which should allow better adsorption of toxic substances and detection reagents. In this study, a magnesium aluminometasilicate with high SSA was utilized along with various concentrations of volatile substances (menthol, camphor and ammonium bicarbonate) to increase further the carrier SSA after their sublimation. The samples were evaluated in terms of physicochemical parameters, their morphology was assessed by scanning electron microscopy, and the Brunauer–Emmett–Teller (BET) method was utilized to measure SSA. The samples were then impregnated with a detection reagent o-phenylenediamine-pyronine and tested with diphosgene. Only samples prepared using menthol or camphor were found to show red fluorescence under the UV light in addition to the eye-visible red-violet color. This allowed the detection of diphosgene/phosgene at a concentration of only 0.1 mg/m3 in the air for samples M20.0 and C20.0 with their SSA higher than 115 m2/g, thus exceeding the sensitivity of the first-generation DT-12 detection tube.

Photocatalytic Application of Graphene-Based TiO2 Nanocomposite

2017 ◽  
Vol 266 ◽  
pp. 79-83
Author(s):  
Vorrada Loryuenyong ◽  
Khajornsak Intong ◽  
Vannapa Pongpraphan ◽  
Watcharothai Suksakkhee ◽  
Achanai Buasri
Keyword(s):  
Graphene Oxide ◽  
Specific Surface ◽  
Band Gap ◽  
Surface Area ◽  
Specific Surface Area ◽  
Energy Band ◽  
Uv Light ◽  
High Specific Surface Area ◽  
Energy Band Gap ◽  
Photodegradation Efficiency

Titanium dioxide (TiO2) is one of the most well known photocatalytic materials. However, TiO2 is only photoactive to ultraviolet (UV) light, and the lifetime of the electron-hole pair recombination is too short. In this work, TiO2 anatase nanotubes with an energy band gap of 3.01 eV and specific surface area of 112.46 m2/g were synthesized via hydrothermal method. The results showed that, by incorporating graphene oxide (XGO) and reduced graphene oxide (RGO), the photodegradation efficiency could be enhanced by increasing electron lifetime and charge carrier separation, as well as narrowing the energy band gap. The examination of photodegradation activity under UVC irradiation indicated that a maximum photodegradation efficiency was achieved with TiO2-XGO nanocomposite due to its high specific surface area and strong hydrophilic property.

scholarly journals Nanoporous Quasi-High-Entropy Alloy Microspheres

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 345 ◽  
Author(s):  
Lianzan Yang ◽  
Yongyan Li ◽  
Zhifeng Wang ◽  
Weimin Zhao ◽  
Chunling Qin
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Hierarchical Porous

High-entropy alloys (HEAs) present excellent mechanical properties. However, the exploitation of chemical properties of HEAs is far less than that of mechanical properties, which is mainly limited by the low specific surface area of HEAs synthesized by traditional methods. Thus, it is vital to develop new routes to fabricate HEAs with novel three-dimensional structures and a high specific surface area. Herein, we develop a facile approach to fabricate nanoporous noble metal quasi-HEA microspheres by melt-spinning and dealloying. The as-obtained nanoporous Cu30Au23Pt22Pd25 quasi-HEA microspheres present a hierarchical porous structure with a high specific surface area of 69.5 m2/g and a multiphase approximatively componential solid solution characteristic with a broad single-group face-centered cubic XRD pattern, which is different from the traditional single-phase or two-phase solid solution HEAs. To differentiate, these are named quasi-HEAs. The synthetic strategy proposed in this paper opens the door for the synthesis of porous quasi-HEAs related materials, and is expected to promote further applications of quasi-HEAs in various chemical fields.

KCl-assisted activation: Moringa oleifera branch-derived porous carbon for high performance supercapacitor

2021 ◽  
Vol 45 (12) ◽  
pp. 5712-5719
Author(s):  
Yongxiang Zhang ◽  
Peifeng Yu ◽  
Mingtao Zheng ◽  
Yong Xiao ◽  
Hang Hu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
High Performance ◽  
Moringa Oleifera ◽  
High Specific Surface Area ◽  
Porous Carbons

Porous carbons with a high specific surface area (2314–3470 m2 g−1) are prepared via a novel KCl-assisted activation strategy for high-performance supercapacitor.

Carbon material with high specific surface area and high pseudocapacitance: Possible application in supercapacitors

2021 ◽  
Vol 319 ◽  
pp. 111063
Author(s):  
Yury M. Volfkovich ◽  
Valentin E. Sosenkin ◽  
Alexei Y. Rychagov ◽  
Alexandr V. Melezhik ◽  
Alexei G. Tkachev ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Carbon Material ◽  
High Specific Surface Area

Efficient conversion of CO2 to methane using thin-layer SiOx matrix anchored nickel catalysts

2019 ◽  
Vol 43 (33) ◽  
pp. 13217-13224 ◽  
Author(s):  
Xieyi Huang ◽  
Peng Wang ◽  
Zhichao Zhang ◽  
Shaoning Zhang ◽  
Xianlong Du ◽  
...  
Keyword(s):  
Thin Layer ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Geometric Structure ◽  
Nickel Catalysts ◽  
High Specific Surface Area ◽  
Efficient Conversion

Thin-layer SiOx matrix anchored nickel catalysts with high specific surface area and a unique electronic/geometric structure were fabricated for efficient CO2 methanation.

High specific surface area LaFeCo perovskites—Synthesis by nanocasting and catalytic behavior in the reduction of NO with CO

2009 ◽  
Vol 90 (3-4) ◽  
pp. 441-450 ◽  
Author(s):  
R.K.C. de Lima ◽  
M.S. Batista ◽  
M. Wallau ◽  
E.A. Sanches ◽  
Y.P. Mascarenhas ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
Catalytic Behavior ◽  
Reduction Of No
Sign in / Sign up

Export Citation Format

Share Document