scholarly journals New Methods to Seismic Monitoring: Laboratory Comparative Study of Michelson Fiber-Optic Interferometer and Pneumatic Measurement Systems

Photonics ◽  
2021 ◽  
Vol 8 (5) ◽  
pp. 147
Author(s):  
Martin Stolarik ◽  
Jan Nedoma ◽  
Radek Martinek ◽  
Stanislav Kepak ◽  
Eva Hrubesova ◽  
...  
Keyword(s):  
Fiber Optics ◽  
Fiber Optic ◽  
International System ◽  
Physical Principle ◽  
Vibration Monitoring ◽  
Vibration Measurement ◽  
Promising Alternative ◽  
Seismic Engineering ◽  
System Of Units ◽  
Fiber Optic Interferometer

New possibilities of vibration monitoring can be found in completely different physical approaches, where all measuring technology is currently based on sensors in the electrical domain. This paper presents two different promising alternative approaches to vibration measurement, specifically in the field of fiber-optics and pneumatic sensors. The proposed solution uses a Michelson fiber-optic interferometer designed without polarization fading and with operationally passive demodulation technique using three mutually phase-shifted optical outputs. Experimentally developed sensor systems for the registration of anthropogenic seismic phenomena were complemented by standard instrumentation for measuring seismicity used as a standard. The measurement was performed under simplified conditions using a calibrated stroke as a source of dynamic loading. In addition to alternative systems, the paper also presents the results of recalculation of the measured values in a time domain and basic relationships for the conversion to basic units derived from the SI (International System of Units) system and used internationally in the field of seismic engineering. The results presented demonstrate that even systems operating on a different physical principle have great potential to replace the existing seismic devices. The correlation coefficients for both sensory devices were high (above 0.9) and the average deviations from the measured values of the amplitude of the oscillation velocity did not exceed the value of 0.02, neither with the fiber-optic or pneumatic sensor.

scholarly journals Pendulum-Type Hetero-Core Fiber Optic Accelerometer for Low-Frequency Vibration Monitoring

Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2528 ◽  
Author(s):  
Hiroshi Yamazaki ◽  
Ichiro Kurose ◽  
Michiko Nishiyama ◽  
Kazuhiro Watanabe
Keyword(s):  
Fiber Optics ◽  
Electromagnetic Interference ◽  
Large Scale ◽  
Fiber Optic ◽  
Low Frequency ◽  
Fiber Optic Sensor ◽  
Vibration Monitoring ◽  
Vibration Measurement ◽  
Displacement Sensor ◽  
Core Fiber

In this paper, a novel pendulum-type accelerometer based on hetero-core fiber optics has been proposed for structural health monitoring targeting large-scale civil infrastructures. Vibration measurement is a non-destructive method for diagnosing the failure of structures by assessing natural frequencies and other vibration patterns. The hetero-core fiber optic sensor utilized in the proposed accelerometer can serve as a displacement sensor with robustness to temperature changes, in addition to immunity to electromagnetic interference and chemical corrosions. Thus, the hetero-core sensor inside the accelerometer measures applied acceleration by detecting the rotation of an internal pendulum. A series of experiments showed that the hetero-core fiber sensor linearly responded to the rotation angle of the pendulum ranging within (−6°, 4°), and furthermore the proposed accelerometer could reproduce the waveform of input vibration in a frequency band of several Hz order.

scholarly journals Pendulum-Type Hetero-Core Fiber Optic Accelerometer for Low-Frequency Vibration Monitoring

2018 ◽  
Author(s):  
Hiroshi Yamazaki ◽  
Ichiro Kurose ◽  
Michiko Nishiyama ◽  
Kazuhiro Watanabe
Keyword(s):  
Fiber Optics ◽  
Electromagnetic Interference ◽  
Large Scale ◽  
Fiber Optic ◽  
Low Frequency ◽  
Fiber Optic Sensor ◽  
Vibration Monitoring ◽  
Vibration Measurement ◽  
Displacement Sensor ◽  
Core Fiber

In this paper, a novel pendulum-type accelerometer based on hetero-core fiber optics has been proposed for structural health monitoring targeting large-scale civil infrastructures. Vibration measurement is a non-destructive method for diagnosing the failure of structures by assessing natural frequencies and other vibration patterns. The hetero-core fiber optic sensor utilized in the proposed accelerometer can serve as a displacement sensor with robustness to temperature changes in addition to immunity to electromagnetic interference and chemical corrosions. Thus the hetero-core sensor inside the accelerometer measures applied acceleration by detecting the rotation of an internal pendulum. A series of experiments showed that the hetero-core fiber sensor linearly responded to the rotation angle of the pendulum ranging within ±5°, and furthermore the proposed accelerometer could reproduce the waveform of input vibration in a frequency band of several Hz order.

A Fiber-Optic Bending Sensor for the Vibration Monitoring of CNC Face-Milling Machine

2009 ◽  
Vol 147-149 ◽  
pp. 627-632
Author(s):  
İsmet Gücüyener ◽  
Erdal Emel
Keyword(s):  
Tool Wear ◽  
Fiber Optic ◽  
Face Milling ◽  
Fiber Optic Sensor ◽  
Vibration Monitoring ◽  
Vibration Measurement ◽  
Milling Machine ◽  
Cnc Milling ◽  
Optic Sensor ◽  
Bending Sensor

Vibration measurement of CNC milling is one of the used techniques for prediction of tool wear. Monitoring of tool wear is very important since a worn tool will affect machine and workpiece either. We developed a fiber-optic sensor for spindle vibration of CNC face-milling machine. The sensor is based on monitoring loss of light from the fiber core. For this sensor a laser light transmitter circuit, a sense plane construction, and a light receiver circuit are designed. Designed fiber-optic sensor is tested on Taksan TMC 650V face-milling machine. Obtained signals from this sensor is investigated in time domain and frequency domain and showed that it is valuable to tool ware monitoring.

Dimensions of plane and solid angles and their units in the International System of Units (SI)

2020 ◽  
pp. 26-32
Author(s):  
M. I. Kalinin ◽  
L. K. Isaev ◽  
F. V. Bulygin
Keyword(s):  
Solid Angle ◽  
International System ◽  
International Committee ◽  
Plane Angle ◽  
Arc Length ◽  
Weights And Measures ◽  
International System Of Units ◽  
System Of Units ◽  
In Series ◽  
Solid Angles

The situation that has developed in the International System of Units (SI) as a result of adopting the recommendation of the International Committee of Weights and Measures (CIPM) in 1980, which proposed to consider plane and solid angles as dimensionless derived quantities, is analyzed. It is shown that the basis for such a solution was a misunderstanding of the mathematical formula relating the arc length of a circle with its radius and corresponding central angle, as well as of the expansions of trigonometric functions in series. From the analysis presented in the article, it follows that a plane angle does not depend on any of the SI quantities and should be assigned to the base quantities, and its unit, the radian, should be added to the base SI units. A solid angle, in this case, turns out to be a derived quantity of a plane angle. Its unit, the steradian, is a coherent derived unit equal to the square radian.

scholarly journals Fiber Optic Sensing Technologies for Battery Management Systems and Energy Storage Applications

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1397
Author(s):  
Yang-Duan Su ◽  
Yuliya Preger ◽  
Hannah Burroughs ◽  
Chenhu Sun ◽  
Paul Ohodnicki
Keyword(s):  
Energy Storage ◽  
Fiber Optics ◽  
Fiber Optic ◽  
Gas Sensing ◽  
Fiber Optic Sensors ◽  
Management Systems ◽  
Practical Implementation ◽  
Battery Management ◽  
Battery Management Systems ◽  
Battery Systems

Applications of fiber optic sensors to battery monitoring have been increasing due to the growing need of enhanced battery management systems with accurate state estimations. The goal of this review is to discuss the advancements enabling the practical implementation of battery internal parameter measurements including local temperature, strain, pressure, and refractive index for general operation, as well as the external measurements such as temperature gradients and vent gas sensing for thermal runaway imminent detection. A reasonable matching is discussed between fiber optic sensors of different range capabilities with battery systems of three levels of scales, namely electric vehicle and heavy-duty electric truck battery packs, and grid-scale battery systems. The advantages of fiber optic sensors over electrical sensors are discussed, while electrochemical stability issues of fiber-implanted batteries are critically assessed. This review also includes the estimated sensing system costs for typical fiber optic sensors and identifies the high interrogation cost as one of the limitations in their practical deployment into batteries. Finally, future perspectives are considered in the implementation of fiber optics into high-value battery applications such as grid-scale energy storage fault detection and prediction systems.

scholarly journals Microanchored borehole fiber optics allows strain profiling of the shallow subsurface

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Cheng-Cheng Zhang ◽  
Bin Shi ◽  
Song Zhang ◽  
Kai Gu ◽  
Su-Ping Liu ◽  
...  
Keyword(s):  
Fiber Optics ◽  
Field Experiments ◽  
Fiber Optic ◽  
Strain Sensing ◽  
Near Surface ◽  
Shallow Subsurface ◽  
Buried Cables ◽  
Capacity Theory ◽  
Confining Pressures ◽  
Strain Determination

AbstractVertical deformation profiles of subterranean geological formations are conventionally measured by borehole extensometry. Distributed strain sensing (DSS) paired with fiber-optic cables installed in the ground opens up possibilities for acquiring high-resolution static and quasistatic strain profiles of deforming strata, but it is currently limited by reduced data quality due to complicated patterns of interaction between the buried cables and their surroundings, especially in upper soil layers under low confining pressures. Extending recent DSS studies, we present an improved approach using microanchored fiber-optic cables—designed to optimize ground-to-cable coupling at the near surface—for strain determination along entire lengths of vertical boreholes. We proposed a novel criterion for soil–cable coupling evaluation based on the geotechnical bearing capacity theory. We applied this enhanced methodology to monitor groundwater-related vertical motions in both laboratory and field experiments. Corroborating extensometer recordings, acquired simultaneously, validated fiber optically determined displacements, suggesting microanchored DSS as an improved means for detecting and monitoring shallow subsurface strain profiles.

Sign in / Sign up

Export Citation Format

Share Document