scholarly journals Tensile Behavior of Polyurethane Organic Polymer and Polypropylene Fiber-Reinforced Sand

Polymers ◽  
2018 ◽  
Vol 10 (5) ◽  
pp. 499 ◽  
Author(s):  
Jin Liu ◽  
Zhihao Chen ◽  
Zezhuo Song ◽  
Yuxia Bai ◽  
Wei Qian ◽  
...  
Keyword(s):  
Polypropylene Fiber ◽  
Tensile Behavior ◽  
Organic Polymer ◽  
Fiber Reinforced ◽  
Reinforced Sand

Water-induced changes in strength characteristics of polyurethane polymer and polypropylene fiber reinforced sand

2021 ◽  
Vol 28 (6) ◽  
pp. 1829-1842
Author(s):  
Ying Wang ◽  
Jin Liu ◽  
Yong Shao ◽  
Xiao-fan Ma ◽  
Chang-qing Qi ◽  
...  
Keyword(s):  
Polypropylene Fiber ◽  
Strength Characteristics ◽  
Fiber Reinforced ◽  
Reinforced Sand ◽  
Induced Changes

Tensile Behavior of SiC Fiber-Reinforced γ-TiAl Composites Prepared by Suction Casting

2021 ◽  
Author(s):  
Yingying Shen ◽  
Qing Jia ◽  
Xu Zhang ◽  
Ronghua Liu ◽  
Yumin Wang ◽  
...  
Keyword(s):  
Tensile Behavior ◽  
Fiber Reinforced ◽  
Suction Casting ◽  
Sic Fiber

scholarly journals Multi-Scale Study of The Small-Strain Damping Ratio of Fiber-Sand Composites

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2476
Author(s):  
Haiwen Li ◽  
Sathwik S. Kasyap ◽  
Kostas Senetakis
Keyword(s):  
Dynamic Properties ◽  
Wide Spectrum ◽  
Damping Ratio ◽  
Polypropylene Fiber ◽  
Small Strain ◽  
Treatment Method ◽  
Fiber Content ◽  
Polypropylene Fibers ◽  
Test Results ◽  
Fiber Reinforced

The use of polypropylene fibers as a geosynthetic in infrastructures is a promising ground treatment method with applications in the enhancement of the bearing capacity of foundations, slope rehabilitation, strengthening of backfills, as well as the improvement of the seismic behavior of geo-systems. Despite the large number of studies published in the literature investigating the properties of fiber-reinforced soils, less attention has been given in the evaluation of the dynamic properties of these composites, especially in examining damping characteristics and the influence of fiber inclusion and content. In the present study, the effect of polypropylene fiber inclusion on the small-strain damping ratio of sands with different gradations and various particle shapes was investigated through resonant column (macroscopic) experiments. The macroscopic test results suggested that the damping ratio of the mixtures tended to increase with increasing fiber content. Accordingly, a new expression was proposed which considers the influence of fiber content in the estimation of the small-strain damping of polypropylene fiber-sand mixtures and it can be complementary of damping modeling from small-to-medium strains based on previously developed expressions in the regime of medium strains. Additional insights were attempted to be obtained on the energy dissipation and contribution of fibers of these composite materials by performing grain-scale tests which further supported the macroscopic experimental test results. It was also attempted to interpret, based on the grain-scale tests results, the influence of fiber inclusion in a wide spectrum of properties for fiber-reinforced sands providing some general inferences on the contribution of polypropylene fibers on the constitutive behavior of granular materials.

Experimental evaluation on engineering properties and microstructure of the high-performance fiber-reinforced mortar with low polypropylene fiber content

2021 ◽  
Vol 72 (7) ◽  
pp. 824-840
Author(s):  
Hung Vu Viet ◽  
Cuong Nguyen Tuan ◽  
Duy Nguyen Huu ◽  
Tho Ngo Nguyen Ngoc ◽  
Phuoc Huynh Trong
Keyword(s):  
High Performance ◽  
Polypropylene Fiber ◽  
Cost Effective ◽  
Fiber Content ◽  
Engineering Properties ◽  
Fiber Reinforced ◽  
Cement Mortars ◽  
High Performance Fiber ◽  
New Construction ◽  
Local Materials

Recently, high-performance fiber-reinforced mortar/concrete (HPFRM) has been researched and developed in many fields such as repair, maintenance, and new construction of infrastructure works due to its high strain capacity and tight crack width characteristics. Optimizing the design of mixture proportions and structures using HPFRM is still a complex mechanical and physical process, depending on the design principles, specific site conditions, and their local materials. This study aims to develop an HPFRM with low polypropylene fiber content by using locally available ingredients in Southern Vietnam to address the deficiencies commonly observed in traditional cement grout mortars. Three mixture proportions were prepared with different water-to-binder (w/b) ratios of 0.2, 0.25, and 0.3. Then, the performance of HPFRM was evaluated in both fresh and hardened stages. Additionally, the microstructural characteristics of each mix design were also assessed through scanning electron microscope observation. The experimental results showed that the optimum w/b of 0.25 and a fixed dosage of 0.6% polypropylene fiber produced positive impacts on the rheological, mechanical properties, and also ductility of the high-performance mortar. It was concluded that HPFRMs are promising for cost-effective and sustainable cement mortars.

Improved Early-Age Cohesive Stress Response from Hybrid Blends of Micro and Macro Fibers

2021 ◽  
Vol 1046 ◽  
pp. 1-7
Author(s):  
Manjunath V. Bhogone ◽  
Kolluru V.L. Subramaniam
Keyword(s):  
Reinforced Concrete ◽  
Stress Response ◽  
Volume Fraction ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Early Age ◽  
Fiber Reinforced ◽  
Cohesive Stress ◽  
Concrete Matrix ◽  
Polypropylene Fiber Reinforced Concrete

The fracture response of macro polypropylene fiber reinforced concrete (PPFRC) and hybrid blend of macro and micro polypropylene fiber reinforced concrete (HyFRC) are evaluated at 1, 3, 7 and 28 days. There is an improvement in the early-age fracture response of HyFRC compared to PPFRC. The changing cohesive stress-crack separation relationship produced by ageing of the concrete matrix is determined from the fracture test responses. An improved early-age cohesive stress response is obtained from the hybrid blend containing micro and macro fibers. The hybrid fiber blend also has a higher tensile strength at early age when compared to an identical volume fraction of macro polypropylene fibers.

scholarly journals Influence of the Fiber Volume Content on the Durability-Related Properties of Polypropylene-Fiber-Reinforced Concrete

2020 ◽  
Vol 12 (2) ◽  
pp. 549
Author(s):  
Chenfei Wang ◽  
Zixiong Guo ◽  
Ditao Niu
Keyword(s):  
Reinforced Concrete ◽  
Flexural Strength ◽  
Volume Content ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Freeze Thaw ◽  
Chloride Environment ◽  
Polypropylene Fiber Reinforced Concrete

Polypropylene-fiber-reinforced concrete impacts the early shrinkage during the plastic stage of concrete, and the fiber volume content influences the durability-related properties of concrete. The purpose of this paper was to investigate the influence of fiber volume content on the mechanical properties, durability, and chloride ion penetration of polypropylene-fiber-reinforced concrete in a chloride environment. Tests were carried out on cubes and cylinders of polypropylene-fiber-reinforced concrete with polypropylene fiber contents ranging from 0% to 0.5%. Extensive data from flexural strength testing, dry–wet testing, deicer frost testing, and chloride penetration testing were recorded and analyzed. The test results show that the addition of the fiber improves the failure form of the concrete specimens, and 0.1% fiber content maximizes the compactness of the concrete. The flexural strength of specimen C2 with 0.1% fiber shows the highest strength obtained herein after freeze–thaw cycling, and the water absorption of specimen C2 is also the lowest after dry–wet cycling. The results also indicate that increasing the fiber volume content improves the freeze–thaw resistance of the concrete in a chloride environment. Chlorine ions migrate with the moisture during dry–wet and freeze–thaw cycling. The chlorine ion diffusion coefficient (Dcl) increases with increasing fiber content, except for that of specimen C2 in a chloride environment. The Dcl during freeze–thaw cycling is much higher than that during dry–wet cycling.

Sign in / Sign up

Export Citation Format

Share Document