scholarly journals Modeling of Grouting Penetration in Porous Medium with Influence of Grain Distribution and Grout–Water Interaction

Processes ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 77
Author(s):  
Mengmeng Zhou ◽  
Fengshuai Fan ◽  
Zhuo Zheng ◽  
Chenyang Ma
Keyword(s):  
Grain Size ◽  
Porous Medium ◽  
Fluid Flow ◽  
Analytical Solution ◽  
Stokes Equations ◽  
Linear Trend ◽  
Injection Pressure ◽  
Navier Stokes ◽  
Two Phase ◽  
Grain Distribution

In this study, a numerical model of grouting penetration in a porous medium is established. The fluid flow in the interstices of the porous medium is directly modeled by Navier–Stokes equations. The grouting process is considered as a two-phase flow problem, and the level set method is used to characterize the interaction between grout and groundwater. The proposed model has considered the nuances for each grain during grouting penetration, instead of representing the fluid flow as a continuum process. In the simulation, three kinds of porosity (0.3; 0.4; 0.5) and two kinds of grain size distribution (0.5~1 mm; 1~2 mm) are used. Results show that: the pressure drop along penetration distance is approximately in a linear trend. The variation of filling degree along grouting distance approximately obeys a quadratic polynomial function. The injection pressure is influenced by the porosity and grain size of the porous medium, especially by the former. A theoretical analysis is carried out to propose an analytical solution of the grouting penetration. The analytical solution gives a good estimation when the grain amounts in the porous medium are small, and the difference becomes larger as the grain amounts increase.

Fluid flow over and through a regular bundle of rigid fibres

2016 ◽  
Vol 792 ◽  
pp. 5-35 ◽  
Author(s):  
Giuseppe A. Zampogna ◽  
Alessandro Bottaro
Keyword(s):  
Porous Medium ◽  
Fluid Flow ◽  
Flow Field ◽  
Stokes Equations ◽  
Transversely Isotropic ◽  
Navier Stokes ◽  
Leading Order ◽  
Macroscopic Scale ◽  
Navier Stokes Equations ◽  
Homogenized Model

The interaction between a fluid flow and a transversely isotropic porous medium is described. A homogenized model is used to treat the flow field in the porous region, and different interface conditions, needed to match solutions at the boundary between the pure fluid and the porous regions, are evaluated. Two problems in different flow regimes (laminar and turbulent) are considered to validate the system, which includes inertia in the leading-order equations for the permeability tensor through a Oseen approximation. The components of the permeability, which characterize microscopically the porous medium and determine the flow field at the macroscopic scale, are reasonably well estimated by the theory, both in the laminar and the turbulent case. This is demonstrated by comparing the model’s results to both experimental measurements and direct numerical simulations of the Navier–Stokes equations which resolve the flow also through the pores of the medium.

scholarly journals An Axisymmetric Squeezing Fluid Flow between the Two Infinite Parallel Plates in a Porous Medium Channel

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
S. Islam ◽  
Hamid Khan ◽  
Inayat Ali Shah ◽  
Gul Zaman
Keyword(s):  
Differential Equation ◽  
Porous Medium ◽  
Fluid Flow ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Parallel Plates ◽  
Transform Method ◽  
Navier Stokes Equations ◽  
Differential Transform ◽  
Fluid Parameters

The flow between two large parallel plates approaching each other symmetrically in a porous medium is studied. The Navier-Stokes equations have been transformed into an ordinary nonlinear differential equation using a transformationψ(r,z)=r2F(z). Solution to the problem is obtained by using differential transform method (DTM) by varying different Newtonian fluid parameters and permeability of the porous medium. Result for the stream function is presented. Validity of the solutions is confirmed by evaluating the residual in each case, and the proposed scheme gives excellent and reliable results. The influence of different parameters on the flow has been discussed and presented through graphs.

Lattice-Boltzmann Simulations of Complex Fluids

1997 ◽  
Vol 08 (04) ◽  
pp. 783-792 ◽  
Author(s):  
G. Gonnella ◽  
E. Orlandini ◽  
J. M. Yeomans
Keyword(s):  
Free Energy ◽  
Fluid Flow ◽  
Phase Separation ◽  
Lattice Boltzmann ◽  
Stokes Equations ◽  
Positive Curvature ◽  
Navier Stokes ◽  
Two Phase ◽  
Lattice Boltzmann Simulation ◽  
Lattice Boltzmann Simulations

We show that by including thermodynamic functions derived from a chosen free energy in a lattice-Boltzmann simulation of fluid flow it is possible to ensure that the fluid relaxes to a well-defined equlilibrium corresponding to the minimum of the input free energy. Two examples are given of phase separation in a binary fluid: bulk two-phase coexistence and a lamellar phase stabilised by a competition between negative surface tension and positive curvature energy. The lattice-Boltzmann framework simulates the Navier–Stokes equations of fluid flow and hence allows investigation of the effects of hydrodynamics on the kinetics of phase separation and on the rheology of the ordered structures.

scholarly journals A computational fluid dynamics investigation of the flow behavior near a wellbore using three-dimensional Navier–Stokes equations

2019 ◽  
Vol 11 (9) ◽  
pp. 168781401987325
Author(s):  
Mohammad Jalal Ahammad ◽  
Mohammad Azizur Rahman ◽  
Jahrul Alam ◽  
Stephen Butt
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Fluid Flow ◽  
Analytical Solution ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Hydrocarbon Reservoir ◽  
Wellbore Pressure

The analysis of fluid flow near the wellbore region of a hydrocarbon reservoir is a complex phenomenon. The pressure drop and flow rates change in the near wellbore with time, and the understanding of this system is important. Besides existing theoretical and experimental approaches, computational fluid dynamics studies can help understanding the nature of fluid flow from a reservoir into the wellbore. In this research, a near wellbore model using three-dimensional Navier–Stokes equations is presented for analyzing the flow around the wellbore. Pressure and velocity are coupled into a single system which is solved by an algebraic multigrid method for the optimal computational cost. The computational fluid dynamics model is verified against the analytical solution of the Darcy model for reservoir flow, as well as against the analytical solution of pressure diffusivity equation. The streamlines indicate that the flow is radially symmetric with respect to the vertical plane as expected. The present computational fluid dynamics investigation observes that the motion of reservoir fluid becomes nonlinear at the region of near wellbore. Moreover, this nonlinear behavior has an influence on the hydrocarbon recovery. The flow performance through wellbore is analyzed using the inflow performance relations curve for the steady-state and time-dependent solution. Finally, the investigation suggests that the Navier–Stokes equations along with a near-optimal solver provide an efficient computational fluid dynamics framework for analyzing fluid flow in a wellbore and its surrounding region.

scholarly journals Coupling Two-Phase Fluid Flow with Two-Phase Darcy Flow in Anisotropic Porous Media

2014 ◽  
Vol 6 ◽  
pp. 871021 ◽  
Author(s):  
Jie Chen ◽  
Shuyu Sun ◽  
Zhangxin Chen
Keyword(s):  
Porous Medium ◽  
Porous Media ◽  
Fluid Flow ◽  
Domain Decomposition Method ◽  
Darcy Flow ◽  
Navier Stokes ◽  
Free Fluid ◽  
Two Phase ◽  
Anisotropic Porous Medium ◽  
Phase Fluid

This paper reports a numerical study of coupling two-phase fluid flow in a free fluid region with two-phase Darcy flow in a homogeneous and anisotropic porous medium region. The model consists of coupled Cahn-Hilliard and Navier-Stokes equations in the free fluid region and the two-phase Darcy law in the anisotropic porous medium region. A Robin-Robin domain decomposition method is used for the coupled Navier-Stokes and Darcy system with the generalized Beavers-Joseph-Saffman condition on the interface between the free flow and the porous media regions. Obtained results have shown the anisotropic properties effect on the velocity and pressure of the two-phase flow.

Numerical Modeling of Evolution of Boundary Between Incompressible Gas and Liquid in Two-Dimensional Region

2006 ◽  
Vol 4 ◽  
pp. 224-236
Author(s):  
A.S. Topolnikov
Keyword(s):  
Numerical Modeling ◽  
Interphase Boundary ◽  
Incompressible Liquid ◽  
Stokes Equations ◽  
Numerical Code ◽  
Navier Stokes ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Incompressible Media ◽  
Good Agreement

The paper is devoted to numerical modeling of Navier–Stokes equations for incompressible media in the case, when there exist gas and liquid inside the rectangular calculation region, which are separated by interphase boundary. The set of equations for incompressible liquid accounting for viscous, gravitational and surface (capillary) forces is solved by finite-difference scheme on the spaced grid, for description of interphase boundary the ideology of Level Set Method is used. By developed numerical code the set of hydrodynamic problems is solved, which describe the motion of two-phase incompressible media with interphase boundary. As a result of numerical simulation the solutions are obtained, which are in good agreement with existing analytical and experimental solutions.

scholarly journals Experimental and Numerical Study on Water Filling and Air Expelling Process in a Pipe with Multiple Air Valves under Water Slow Filling Condition

Water ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2511
Author(s):  
Jintao Liu ◽  
Di Xu ◽  
Shaohui Zhang ◽  
Meijian Bai
Keyword(s):  
Numerical Model ◽  
Stokes Equations ◽  
Numerical Study ◽  
Practical Method ◽  
Navier Stokes ◽  
Physical Processes ◽  
Two Phase ◽  
Saint Venant Equations ◽  
Water Filling ◽  
Air Valve

This paper investigates the physical processes involved in the water filling and air expelling process of a pipe with multiple air valves under water slow filling condition, and develops a fully coupledwater–air two-phase stratified numerical model for simulating the process. In this model, the Saint-Venant equations and the Vertical Average Navier–Stokes equations (VANS) are respectively applied to describe the water and air in pipe, and the air valve model is introduced into the VANS equations of air as the source term. The finite-volume method and implicit dual time-stepping method (IDTS) with two-order accuracy are simultaneously used to solve this numerical model to realize the full coupling between water and air movement. Then, the model is validated by using the experimental data of the pressure evolution in pipe and the air velocity evolution of air valves, which respectively characterize the water filling and air expelling process. The results show that the model performs well in capturing the physical processes, and a reasonable agreement is obtained between numerical and experimental results. This agreement demonstrates that the proposed model in this paper offers a practical method for simulating water filling and air expelling process in a pipe with multiple air valves under water slow filling condition.

scholarly journals Development of Hybrid Airlift-Jet Pump with Its Performance Analysis

2018 ◽  
Vol 8 (9) ◽  
pp. 1413 ◽  
Author(s):  
Dan Yao ◽  
Kwongi Lee ◽  
Minho Ha ◽  
Cheolung Cheong ◽  
Inhiug Lee
Keyword(s):  
Boundary Conditions ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Stokes Equations ◽  
Flow Characteristics ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Jet Pump ◽  
Two Phase

A new pump, called the hybrid airlift-jet pump, is developed by reinforcing the advantages and minimizing the demerits of airlift and jet pumps. First, a basic design of the hybrid airlift-jet pump is schematically presented. Subsequently, its performance characteristics are numerically investigated by varying the operating conditions of the airlift and jet parts in the hybrid pump. The compressible unsteady Reynolds-averaged Navier-Stokes equations, combined with the homogeneous mixture model for multiphase flow, are used as the governing equations for the two-phase flow in the hybrid pump. The pressure-based methods combined with the Pressure-Implicit with Splitting of Operators (PISO) algorithm are used as the computational fluid dynamics techniques. The validity of the present numerical methods is confirmed by comparing the predicted mass flow rate with the measured ones. In total, 18 simulation cases that are designed to represent the various operating conditions of the hybrid pump are investigated: eight of these cases belong to the operating conditions of only the jet part with different air and water inlet boundary conditions, and the remaining ten cases belong to the operating conditions of both the airlift and jet parts with different air and water inlet boundary conditions. The mass flow rate and the efficiency are compared for each case. For further investigation into the detailed flow characteristics, the pressure and velocity distributions of the mixture in a primary pipe are compared. Furthermore, a periodic fluctuation of the water flow in the mass flow rate is found and analyzed. Our results show that the performance of the jet or airlift pump can be enhanced by combining the operating principles of two pumps into the hybrid airlift-jet pump, newly proposed in the present study.

NUMERICAL SIMULATION OF ISOTHERMAL AND THERMAL TWO-PHASE FLOWS USING PHASE-FIELD MODELING

2007 ◽  
Vol 18 (04) ◽  
pp. 536-545 ◽  
Author(s):  
NAOKI TAKADA ◽  
AKIO TOMIYAMA
Keyword(s):  
Phase Field ◽  
Stokes Equations ◽  
Density Ratio ◽  
Navier Stokes ◽  
Phase Field Modeling ◽  
Two Phase Flows ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Field Modeling ◽  
High Density Ratio

For interface-tracking simulation of two-phase flows in various micro-fluidics devices, we examined the applicability of two versions of computational fluid dynamics method, NS-PFM, combining Navier-Stokes equations with phase-field modeling for interface based on the van der Waals-Cahn-Hilliard free-energy theory. Through the numerical simulations, the following major findings were obtained: (1) The first version of NS-PFM gives good predictions of interfacial shapes and motions in an incompressible, isothermal two-phase fluid with high density ratio on solid surface with heterogeneous wettability. (2) The second version successfully captures liquid-vapor motions with heat and mass transfer across interfaces in phase change of a non-ideal fluid around the critical point.

Sign in / Sign up

Export Citation Format

Share Document