scholarly journals Deionized Water Electrochemical Machining Hybridized with Alumina Powder Polishing for Microcavity of M-333 Mold Steel

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 152
Author(s):  
Albert Wen-Jeng Hsue ◽  
Zih-Yuan Huang
Keyword(s):  
Electrochemical Machining ◽  
Cost Effective ◽  
Deionized Water ◽  
Mold Material ◽  
Alumina Powder ◽  
Tool Electrode ◽  
Micro Edm ◽  
Electrical Discharges ◽  
Mold Fabrication ◽  
Optional Process

An electrochemical machining (ECM) process for microcavity fabrication with deionized water (DI-water) and an ECM polishing hybrid with alumina powder of 1.0 μm grains on a single micro-EDM machine are proposed. The process adopts tungsten carbide as tool electrode and M-333 tool steel as the mold material. It reveals that employing the 30 μm/min feed rate with 50 mA and 0.2 ms of pulse-width is suitable for DI-water electrochemical machining. The DI-water ECM process can achieve an excellent surface roughness at Ra 0.169 µm on a semispherical round cavity. Combining the ECM with hybrid polishing with the alumina powder can achieve a better profile for a much deeper cavity than pure electrolytic discharge machining. The hybrid ECM polishing can efficiently finish a micro square insert of 0.6 mm length at 64 μm depth. Such ECM milling can achieve an S-shaped microchannel of radius 1.0 mm and a slot of 1.0 × 0.5 mm2 with 110 μm depth, demonstrating its feasibility and the surface integrity with accurate profile and roughness of Ra 0.227 μm. This study provides a cost-effective scheme for micro mold fabrication with a conventional micro-EDM machine tool and an intuitive and convenient optional process. However, some micro-electrical discharges occurred due to the breakdown of insulation, which creates micro craters on the surface of the parts.

Investigation on the Influence of Machining Fluid on Processing Characteristics in Micro-EDM

2012 ◽  
Vol 479-481 ◽  
pp. 407-413 ◽  
Author(s):  
Sha Li ◽  
Wataru Natsu ◽  
Takeshi Masaki ◽  
Zu Yuan Yu
Keyword(s):  
Feed Rate ◽  
Deionized Water ◽  
Tool Electrode ◽  
Electrode Wear ◽  
Micro Edm ◽  
Machining Speed ◽  
Small Electrode ◽  
Short Circuits ◽  
Edm Drilling

In this paper the influence of machining liquid on the processing characteristics, such as the tool electrode wear and the tool actual feed were discussed. Micro EDM drilling was carried out using deionized water and oil dielectric as the machining liquid. It was found that using deionized water reduced the tool electrode wear. Also, occurrence of short-circuits during the processing is one of the reasons for causing large electrode wear. In the case of using oil dielectric, processed depth influences the tool electrode wear greatly and causes the change in the actual feed rate. While using deionized water, processed depth also causes the change in the actual feed rate, but nearly had no influence on the tool electrode wear. Meanwhile, when using deionized water, although the small electrode wear and high machining speed can be obtained, electrolytic dissolution may occur. Therefore, the effective method of decreasing the open voltage and increasing the feed rate to prevent the electrolytic dissolution was mentioned and experimentally verified.

scholarly journals An Experimental Study on Processing TC4 with Nano Particle Surfactant Mixed Micro EDM

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6074
Author(s):  
Tingting Ni ◽  
Qingyu Liu ◽  
Zhiheng Chen ◽  
Dongsheng Jiang ◽  
Shufeng Sun
Keyword(s):  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Open Circuit ◽  
Deionized Water ◽  
Micro Edm ◽  
Nano Particle ◽  
Machining Performance ◽  
Machined Surface ◽  
Micro Electrical Discharge Machining ◽  
Lower Tool

Micro electrical discharge machining (micro EDM) is able to remove conductive material by non-contact instantaneous high temperature, which is more suitable for machining titanium and its alloys compared with traditional machining methods. To further improve the machining efficiency and machined surface quality of micro EDM, the nano particle surfactant mixed micro EDM method is put forward in this paper. Experiments were conducted to explore the effect of nano particle surfactant on the micro EDM performance of titanium alloy. The results show that the material removal rate of micro EDM in dielectric mixed with TiO2 is the highest when open-circuit voltage is 100 V, followed by Al2O3 and ZrO2. Lower tool wear rate can be produced by using dielectric mixed with nano particle surfactant. The taper ratio of micro EDM in dielectric mixed with nano particle surfactant is higher than that in deionized water. The surface roughness Ra of micro EDM in dielectric mixed with TiO2 can be 50% lower than that in deionized water. It is helpful to improve the machining performance by adding surface surfactant in the dielectric of micro EDM.

Effects of tool electrode size on surface characteristics in micro-EDM

2018 ◽  
Vol 96 (9-12) ◽  
pp. 3909-3916 ◽  
Author(s):  
Kan Wang ◽  
Qinhe Zhang ◽  
Guang Zhu ◽  
Jianhua Zhang
Keyword(s):  
Surface Characteristics ◽  
Tool Electrode ◽  
Micro Edm ◽  
Electrode Size

scholarly journals Enhancement of the Localization Effect during Electrochemical Machining of Inconel 718 by Using an Alkaline Solution

2019 ◽  
Vol 9 (4) ◽  
pp. 690 ◽  
Author(s):  
Dengyong Wang ◽  
Bin He ◽  
Wenjian Cao
Keyword(s):  
Alkaline Solution ◽  
Inconel 718 ◽  
Electrochemical Machining ◽  
Cost Effective ◽  
Machining Accuracy ◽  
Mixed Solution ◽  
Inconel 718 Alloy ◽  
Machined Surface ◽  
Localization Effect ◽  
Cost Effective Method

Electrochemical machining (ECM) is a cost-effective method for the machining of difficult-to-cut Inconel 718 superalloy. However, the machining accuracy of ECM is still limited by the poor localization effect due to the existence of stray corrosion. In this paper, a mixed solution of neutral NaNO3 and alkaline NaOH is used to improve the localization effect during ECM of Inconel 718. The potentiodynamic polarization curves and current efficiencies for metal dissolution are measured, and the micro morphologies are examined. The results show that the use of an alkaline solution can promote the formation of a compact passive film on the surface of Inconel 718. ECM tests with cylindrical electrodes are specially designed to verify the effect of alkaline solution on the localization of anodic dissolution. The experimental results indicated that the stray corrosion of the non-machined surface of Inconel 718 alloy can be effectively eliminated by using a mixed solution of NaNO3 and NaOH. The surface roughness of the non-machined area can be noticeably improved.

CAD/CAM Integration System of 3D Micro EDM

2007 ◽  
Author(s):  
Hao Tong ◽  
Jing Cui ◽  
Yong Li ◽  
Yang Wang
Keyword(s):  
Real Time ◽  
Numerical Control ◽  
Machining Process ◽  
Tool Electrode ◽  
Electrode Wear ◽  
Micro Edm ◽  
Model Design ◽  
Integration System ◽  
Cad Cam ◽  
Micro Structures

In 3D scanning micro electro discharge machining (EDM), the CAD/CAM systems being used in mechanical milling of numerical control (NC) are unable to be applied directly due to the particularity of tool electrode wear. Based on industry computer and RT-Linux software platform, a CAD/CAM integration system of 3D micro EDM is developed. In the developed CAD/CAM integration system, the hardware includes mainly a micro feed mechanism for servo control, XY worktable, a high frequency pulse power supply, monitoring circuits etc., and the functions consist of model design, scanning path planning and simulation, NC code generation and post processing, real-time compensating of tool electrode wear, and machining control of states and process. The method of double buffer storage is adopted to transmit numbers of NC machining data. Servo scanning EDM method is used to realize real-time electrode wear compensating and thereby 3D micro structures are machined automatically. The machining experiments are made about model design, parameters optimizing, and process control. The typical 3D micro structures with space curved surfaces and lines have been machined such as micro prism, micro half tube, camber correlation line, and so on. The machining process and results show that the CAD/CAM integration system has the characters of higher real-time, reliability, and general using.

Surface finishing of micro-EDM holes using deionized water

2009 ◽  
Vol 19 (4) ◽  
pp. 045025 ◽  
Author(s):  
Do Kwan Chung ◽  
Hong Shik Shin ◽  
Bo Hyun Kim ◽  
Min Soo Park ◽  
Chong Nam Chu
Keyword(s):  
Deionized Water ◽  
Surface Finishing ◽  
Micro Edm

Small Diameter External Cylindrical Surfaces Obtained by Ram Electrical Discharge Machining

2014 ◽  
Vol 611-612 ◽  
pp. 650-655 ◽  
Author(s):  
Laurenţiu Slătineanu ◽  
Margareta Coteaţă ◽  
Hans Peter Schulze ◽  
Oana Dodun ◽  
Irina Besliu ◽  
...  
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Process Analysis ◽  
Electrical Discharge Machine ◽  
Small Diameter ◽  
Machining Process ◽  
Dielectric Fluid ◽  
Tool Electrode ◽  
Electrical Discharges ◽  
Pulse On Time

Electrical discharge machining uses the pulse electrical discharges generated between the closest asperities existing on the workpiece surface and the active surface of the tool electrode in dielectric fluid. Essentially, some distinct electrical discharge machining schemas could be used in order to obtain cylindrical external surfaces; within this research, one preferred a machining schema based on the use of a cooper plate in which there were small diameter holes, by taking into consideration the existence of a ram electrical discharge machine. The results of the machining process analysis were presented. A thin copper was considered to be used as tool electrode, in order to diminish the spurious electrical discharges, able to generate shape errors of the machined surface. Some experimental researches were developed by changing the sizes of the process input parameters. As output factors, the test piece and tool electrode masses decreases were considered. Power type empirical mathematical models were determined, in order to highlight the influence exerted by the pulse on time, off time and machining process duration on the output parameters values.

Study of Electrode Wear Ratio of Piezoelectric Self-Adaptive Micro-EDM

2013 ◽  
Vol 589-590 ◽  
pp. 505-510
Author(s):  
De Zheng Kong ◽  
Qin He Zhang ◽  
Xiu Zhuo Fu ◽  
Ya Zhang
Keyword(s):  
Open Circuit Voltage ◽  
Removal Rate ◽  
Open Circuit ◽  
The Self ◽  
Tool Electrode ◽  
Electrode Wear ◽  
Micro Edm ◽  
Traditional Concept ◽  
Wear Ratio ◽  
Self Adaptive

Micro Electrical discharge machining (Micro-EDM) is a non-traditional concept of machining. It is very suitable for machining micro parts of Micro-electromechanical Systems (MEMS). However, the application of micro-EDM is restricted for its own shortcomings such as poor material removal rate and high electrode wear ratio etc. In order to overcome this shortcoming, a new piezoelectric self-adaptive micro-EDM (PSMEDM) is developed based on inverse piezoelectric effect of piezoelectric ceramics and its working mechanism and characteristics have been analyzed in this paper. This machining method can realize the self-tuning regulation of discharge gap depending on the discharging conditions, facilitate removing the debris in the machining gap, reduce the occurrence of arcing and shorting and can realize the self-elimination of short circuits, thus the machining efficiency can be improved drastically. The tool electrode wear ratio (EWR) in machining is studied in this paper. Many experiments have been done and the effects of parameters on electrode wear ratio have been analyzed. Experimental results indicate that: 1) The EWR will rise with the increase of open-circuit voltage and main capacitance in circuit because the increase of open-circuit voltage and capacitance result in increase of single discharge energy. 2) The effect of resistance R1 on EWR is light. With the increase of resistance R1, the EWR will decrease slightly. 3) With the increase of resistance R2, the EWR will decrease firstly and then becomes to increase.

Sign in / Sign up

Export Citation Format

Share Document