scholarly journals A Dispatching Optimization Model for Park Power Supply Systems Considering Power-to-Gas and Peak Regulation Compensation

Processes ◽  
2019 ◽  
Vol 7 (11) ◽  
pp. 813 ◽  
Author(s):  
Yunfu Qin ◽  
Hongyu Lin ◽  
Zhongfu Tan ◽  
Qingyou Yan ◽  
Li Li ◽  
...  

To ensure the stability of park power supply systems and to promote the consumption of wind/photovoltaic generation, this paper proposes a dispatching optimization model for the park power supply system with power-to-gas (P2G) and peak regulation via gas-fired generators. Firstly, the structure of a park power system with P2G was built. Secondly, a dispatching optimization model for the park power supply system was constructed with a peak regulation compensation mechanism. Finally, the effectiveness of the model was verified by a case study. The case results show that with the integration of P2G and the marketized peak regulation compensation mechanism, preferential power energy storage followed by gas storage had the best effect on the park power supply system, which minimized the clean energy curtailment to 11.18% and the total cost by approximately $120.190 and maximized the net profit by approximately $152.005.

2015 ◽  
Vol 9 (1) ◽  
pp. 253-262
Author(s):  
Liu Zhongfu ◽  
Zhang Junxing ◽  
Shi Lixin ◽  
Yang Yaning

As for the wide application of arc suppression coil to the grounding in neutral point of mine high voltage grid, grid leakage fault rules and harmonic characteristics of the neutral point grounding system through arc suppression coil are analyzed, the selective leakage protection program “zero-sequence voltage starts, fifth harmonics of grid zerosequence voltage and zero-sequence current are extracted for phase comparison” is proposed, and corresponding fifth harmonic extraction circuit and power direction discrimination circuit are designed. The experimental results show that the protective principle applies not only to the neutral point insulated power supply system, but also to the power supply system in which neutral point passes arc suppression coil, which can solve selective leakage protection problems under different neutral grounding ways, improving the reliability of selective leakage and guaranteeing the stability of the action value.


2013 ◽  
Vol 846-847 ◽  
pp. 190-194
Author(s):  
Shu Jun Yin ◽  
Xue Ren Li ◽  
Ji Geng Luo

The paper designs a three-phase high voltage power supply system based on active disturbance rejection controller which make single-chip microcomputer ATmega128 as the main control chip and the system improve the stability and control precision of dust removing power. Engineering practice shows that, the DC power supply system has the advantages of convenient operation, high work efficiency, system stability.


Author(s):  
V Panteleev ◽  
S Zilberman ◽  
G Pilyugin ◽  
R Petukhov ◽  
E Sizganova ◽  
...  

2018 ◽  
Vol 245 ◽  
pp. 06007 ◽  
Author(s):  
Valery Vanin ◽  
Alexandr Bulychov ◽  
Maxim Popov ◽  
Olga Vasilyeva ◽  
Maria Shakhova

The use of frequency-controlled electric drives in industry and municipal services is accompanied by the problem of their negative impact on the distribution network. As examples, the results of measurements of power quality indices in the power supply system of an oil producing enterprise and on the supply input of a railway traction substation are given. It is shown that the voltage subgroup total harmonic distortions (THDS) can exceed their rated permitted values in 100% of the measurement time.


Author(s):  
Aleksey M. BEZNYAKOV ◽  
Aleksey V. NEMIROV ◽  
Gennadiy B. STEGANOV

The paper discusses transmission, reception, conversion and consumption of energy of laser and microwave radiation from Earth or space power plants. It proposes a classification of advanced systems for remote supply of power to spacecraft (SC). It addresses practicability of using remote power supply to SC under various operational conditions. The paper formulates the problem of evaluating the capability of the existing SC power supply systems to receive and convert emissions from additional sources. An analysis of criteria for the quality of pulsed or rapidly varying flow of energy into a SC power supply system. It reviews the structures of typical channels of power consumption in a SC power supply system. An equivalent circuit replacing receivers of pulsed or rapidly changing radiation is described. A math model is proposed for a power consumption channel operating under conditions of intermittent power supply to photovoltaic converters. Math modeling results are presented and analyzed. Key words: space power plant, solar array, onboard power supply system, power consumption channel, voltage converters.


2016 ◽  
Vol 817 ◽  
pp. 253-260
Author(s):  
Adam Rosiński

The paper presents the issues related to the operation of the operation process of the power supply system of highway telematics. A relationships graph was presented in the considered system, and the Kolmogorov-Chapman system of equations was derived to describe it. Drawing on those equations, relationships for calculating probability of the power supply system staying in state of complete usability SPZ, state of the impendency over safety SZB as well as the state of unreliability of safety SB were derived. Next, this enabled rationalisation of the operation process of the analysed systems.


2019 ◽  
Vol 139 ◽  
pp. 01036
Author(s):  
M.S. Ershov ◽  
R.B. Jalilov ◽  
S.P. Shayimova ◽  
A.I. Choriyev ◽  
M.R. Charieva

The methodology for calculating the reliability of power supply systems with autonomous and mixed energy sources has been considered. Autonomous sources are widely used in industrial power supply systems as primary, backup or emergency sources. The functioning and interchangeability of these systems has features that affect the reliability of power supply. The proposed methodology is based on the method of semi-Markov random processes and can be used for comparative analysis of the reliability of options for power supply systems. The methodology has been brought to software implementation and is accompanied by an example of calculating the reliability of the power supply system for stationary marine oil production platforms.


Sign in / Sign up

Export Citation Format

Share Document