scholarly journals Influence of Ionic Liquids Assisted Synthesis on Morphology and Photocatalytic Properties of Bi4O5Br2

Proceedings ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 26
Author(s):  
Patrycja Wilczewska ◽  
Aleksandra Bielicka-Giełdoń ◽  
Agnieszka Fiszka Borzyszkowska ◽  
Aleksandra Pieczyńska ◽  
Ewa Maria Siedlecka
Keyword(s):  
Ionic Liquids ◽  
Photoelectron Spectroscopy ◽  
Photocatalytic Properties ◽  
X Ray Diffraction ◽  
Sem Images ◽  
New Thought ◽  
X Ray ◽  
Chromium Vi ◽  
Ft Ir ◽  
Adsorption Desorption

A series of Bi4O5Br2 photocatalysts were prepared via an innovation method of synthesis with ionic liquids (ILs). The crystal structures were investigated by X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). The Field Emission Scanning Electron Microscope (FE-SEM) images illustrated the unique structure of prepared photocatalysts. The photocatalysts were also characterized by N2 adsorption-desorption analysis, X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectra (UV-vis/DRS) and photoluminescence spectra (PL). The role of ILs in synthesis of Bi4O5Br2 on morphology and photocatalytic properties were investigated. Rhodamine B, 5-fluorouracil and chromium (VI) were used as the model micropollutants to evaluated adsorption capacity, photooxidation and photoreduction ability of prepared Bi4O5Br2 under artificial solar light. This work provided a new thought for enhanced photocatalytic activity of bismuth oxybromide photocatalysts.

scholarly journals Preparation, Characterization, and Performance Analysis of S-Doped Bi2MoO6 Nanosheets

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1341 ◽  
Author(s):  
Ruiqi Wang ◽  
Duanyang Li ◽  
Hailong Wang ◽  
Chenglun Liu ◽  
Longjun Xu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Degradation Rate ◽  
X Ray Diffraction ◽  
Photo Degradation ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
And Performance ◽  
Adsorption Desorption ◽  
Excellent Stability

S-doped Bi2MoO6 nanosheets were successfully synthesized by a simple hydrothermal method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N2 adsorption–desorption isotherms, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), elemental mapping spectroscopy, photoluminescence spectra (PL), X-ray photoelectron spectroscopy (XPS), and UV-visible diffused reflectance spectra (UV-vis DRS). The photo-electrochemical performance of the samples was investigated via an electrochemical workstation. The S-doped Bi2MoO6 nanosheets exhibited enhanced photocatalytic activity under visible light irradiation. The photo-degradation rate of Rhodamine B (RhB) by S-doped Bi2MoO6 (1 wt%) reached 97% after 60 min, which was higher than that of the pure Bi2MoO6 and other S-doped products. The degradation rate of the recovered S-doped Bi2MoO6 (1 wt%) was still nearly 90% in the third cycle, indicating an excellent stability of the catalyst. The radical-capture experiments confirmed that superoxide radicals (·O2−) and holes (h+) were the main active substances in the photocatalytic degradation of RhB by S-doped Bi2MoO6.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

FeYO3@rGO nanocomposites: Synthesis, characterization and application in photooxidative degradation of atrazine under visible light

2021 ◽  
Vol 11 (5) ◽  
pp. 706-716
Author(s):  
Nada D. Al-Khthami ◽  
Tariq Altalhi ◽  
Mohammed Alsawat ◽  
Mohamed S. Amin ◽  
Yousef G. Alghamdi ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Bandgap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Structural Surface ◽  
Adsorption Desorption

Different organic pollutants have been remediated photo catalytically by applying perovskite photocatalysts. Atrazine (ATR) is a pesticide commonly detected as a pollutant in drinking, surface and ground water. Herein, FeYO3@rGO heterojunction was synthesized and applied for photooxidation decomposition of ATR. First, FeYO 3nanoparticles (NPs) were prepared via routine sol-gel. After that, FeYO3 NPs were successfully incorporated with different percentages (5, 10, 15 and 20 wt.%) of reduced graphene oxide (rGO) in the synthesis of novel FeYO3@rGO photocatalyst. Morphological, structural, surface, optoelectrical and optical characteristics of constructed materials were identified via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), adsorption/desorption isotherms, diffusive reflectance (DR) spectra, and photoluminescence response (PL). Furthermore, photocatalytic achievement of the constructed materials was evaluated via photooxidative degradation of ATR. Various investigations affirmed the usefulness of rGO incorporation on the advancement of formed photocatalysts. Actually, novel nanocomposite containing rGO (15 wt.%) possessed diminished bandgap energy, as well as magnified visible light absorption. Furthermore, such nanocomposite presented exceptional photocatalytic achievement when exposed to visible light as ATR was perfectly photooxidized over finite amount (1.6 g · L-1) from the optimized photocatalyst when illuminated for 30 min. The advanced photocatalytic performance of constructed heterojunctions could be accredited mainly to depressed recombination amid induced charges. The constructed FeYO3@rGO nanocomposite is labelled as efficient photocatalyst for remediation of herbicides from aquatic environments.

scholarly journals Dual Light- and pH-Responsive Composite of Polyazo-Derivative Grafted Cellulose Nanocrystals

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1725 ◽  
Author(s):  
Xiaohong Liu ◽  
Ming Li ◽  
Xuemei Zheng ◽  
Elias Retulainen ◽  
Shiyu Fu
Keyword(s):  
Cellulose Nanocrystals ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray Diffraction ◽  
Responsive Materials ◽  
X Ray ◽  
Ph Response ◽  
Transmission Electron ◽  
Ft Ir ◽  
Hexyl Methacrylate

As a type of functional group, azo-derivatives are commonly used to synthesize responsive materials. Cellulose nanocrystals (CNCs), prepared by acid hydrolysis of cotton, were dewatered and reacted with 2-bromoisobuturyl bromide to form a macro-initiator, which grafted 6-[4-(4-methoxyphenyl-azo) phenoxy] hexyl methacrylate (MMAZO) via atom transfer radical polymerization. The successful grafting was supported by Fourier transform infrared spectroscopy (FT-IR) and Solid magnetic resonance carbon spectrum (MAS 13C-NMR). The morphology and surface composition of the poly{6-[4-(4-methoxyphenylazo) phenoxy] hexyl methacrylate} (PMMAZO)-grafted CNCs were confirmed with Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The grafting rate on the macro-initiator of CNCs was over 870%, and the polydispersities of branched polymers were narrow. The crystal structure of CNCs did not change after grafting, as determined by X-ray diffraction (XRD). The polymer PMMAZO improved the thermal stability of cellulose nanocrystals, as shown by thermogravimetry analysis (TGA). Then the PMMAZO-grafted CNCs were mixed with polyurethane and casted to form a composite film. The film showed a significant light and pH response, which may be suitable for visual acid-alkali measurement and reversible optical storage.

scholarly journals Bulk Versus Surface Modification of Alumina with Mn and Ce Based Oxides for CH4 Catalytic Combustion

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1771 ◽  
Author(s):  
Stefan Neatu ◽  
Mihaela M. Trandafir ◽  
Adelina Stănoiu ◽  
Ovidiu G. Florea ◽  
Cristian E. Simion ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Combustion ◽  
Mixed Oxides ◽  
Sol Gel ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Temperature Programmed ◽  
Catalytic Combustion Of Methane ◽  
Adsorption Desorption

This study presents the synthesis and characterization of lanthanum-modified alumina supported cerium–manganese mixed oxides, which were prepared by three different methods (coprecipitation, impregnation and citrate-based sol-gel method) followed by calcination at 500 °C. The physicochemical properties of the synthesized materials were investigated by various characterization techniques, namely: nitrogen adsorption-desorption isotherms, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and H2–temperature programmed reduction (TPR). This experimental study demonstrated that the role of the catalytic surface is much more important than the bulk one. Indeed, the incipient impregnation of CeO2–MnOx catalyst, supported on an optimized amount of 4 wt.% La2O3–Al2O3, provided the best results of the catalytic combustion of methane on our catalytic micro-convertors. This is mainly due to: (i) the highest pore size dimensions according to the Brunauer-Emmett-Teller (BET) investigations, (ii) the highest amount of Mn4+ or/and Ce4+ on the surface as revealed by XPS, (iii) the presence of a mixed phase (Ce2MnO6) as shown by X-ray diffraction; and (iv) a higher reducibility of Mn4+ or/and Ce4+ species as displayed by H2–TPR and therefore more reactive oxygen species.

scholarly journals Synthesis, Characterization, and Photocatalytic Evaluation of Manganese (III) Phthalocyanine Sensitized ZnWO4 (ZnWO4MnPc) for Bisphenol A Degradation under UV Irradiation

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2139 ◽  
Author(s):  
Chukwuka Bethel Anucha ◽  
Ilknur Altin ◽  
Zekeriya Biyiklioglu ◽  
Emin Bacaksiz ◽  
Ismail Polat ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Uv Irradiation ◽  
Photoelectron Spectroscopy ◽  
Photocatalytic Performance ◽  
Diffuse Reflectance Spectroscopy ◽  
Degradation Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible ◽  
Adsorption Desorption

ZnWO4MnPc was synthesized via a hydrothermal autoclave method with 1 wt.% manganese (iii) phthalocyanine content. The material was characterized for its structural and morphological features via X-ray diffraction (XRD) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, transmission emission microscopy (TEM), scanning electron microscopy-Energy dispersive X-ray spectroscopy (SEM-EDX), N2 adsorption–desorption at 77K, X-ray photoelectron spectroscopy (XPS), and UV-visible/diffuse reflectance spectroscopy(UV-vis/DRS). ZnWO4MnPc photocatalytic performance was tested on the degradation of bisphenol A (BPA). The ZnWO4MnPc material removed 60% of BPA after 4 h of 365 nm UV irradiation. Degradation process improved significantly to about 80% removal in the presence of added 5 mM H2O2 after 4 h irradiation. Almost 100% removal was achieved after 30 min under 450 nm visible light irradiation in the presence of same concentration of H2O2. The effect of ions and humic acid (HA) towards BPA removal was also investigated.

Characterization of Electrospun Poly(Lactic Acid)/polyaniline Blend Nanofibers

2011 ◽  
Vol 332-334 ◽  
pp. 317-320 ◽  
Author(s):  
Hui Qin Zhang
Keyword(s):  
Lactic Acid ◽  
Composite Nanofibers ◽  
Weight Ratio ◽  
Electrospinning Process ◽  
Poly Lactic Acid ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Ft Ir

In this study, composite nanofibers of polyaniline doped with dodecylbenzene sulfonic acid (PANI-DBSA) and Poly(lactic acid) (PLA) were prepared via an electrospinning process. The surface morphology, thermal properties and crystal structure of PLA/PANI-DBSA nanofibers are characterized using Fourier transform infrared spectroscopy (FT-IR), wide-angle x-ray diffraction (WAXD) and scanning electron microscopy (SEM). SEM images showed that the morphology and diameter of the nanofibers were affected by the weight ratio of blend solution.

scholarly journals “PdO vs. PtO”—The Influence of PGM Oxide Promotion of Co3O4 Spinel on Direct NO Decomposition Activity

Catalysts ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 62 ◽  
Author(s):  
Gunugunuri K. Reddy ◽  
Torin C. Peck ◽  
Charles A. Roberts
Keyword(s):  
Photoelectron Spectroscopy ◽  
No Decomposition ◽  
Single Element ◽  
X Ray Diffraction ◽  
X Ray ◽  
Promotional Effect ◽  
Ft Ir ◽  
Temperature Programmed ◽  
Thermal Stability Of

Direct decomposition of NO into N2 and O2 (2NO→N2 + O2) is recognized as the “ideal” reaction for NOx removal because it needs no reductant. It was reported that the spinel Co3O4 is one of the most active single-element oxide catalysts for NO decomposition at higher reaction temperatures, however, activity remains low below 650 °C. The present study aims to investigate new promoters for Co3O4, specifically PdO vs. PtO. Interestingly, the PdO promoter effect on Co3O4 was much greater than the PtO effect, yielding a 4 times higher activity for direct NO decomposition at 650 °C. Also, Co3O4 catalysts with the PdO promoter exhibit higher selectivity to N2 compared to PtO/Co3O4 catalysts. Several characterization measurements, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), H2-temperature programmed reduction (H2-TPR), and in situ FT-IR, were performed to understand the effect of PdO vs. PtO on the properties of Co3O4. Structural and surface analysis measurements show that impregnation of PdO on Co3O4 leads to a greater ease of reduction of the catalysts and an increased thermal stability of surface adsorbed NOx species, which contribute to promotion of direct NO decomposition activity. In contrast, rather than remaining solely as a surface species, PtO enters the Co3O4 structure, and it promotes neither redox properties nor NO adsorption properties of Co3O4, resulting in a diminished promotional effect compared to PdO.

scholarly journals Effect of cerium content on textural and hydrodesulfurization performance for dibenzothiophene over a bulk Ni2P catalyst

2019 ◽  
Vol 44 (1) ◽  
pp. 37-44 ◽  
Author(s):  
Yunwu Yu ◽  
Lianjie Liang ◽  
Changwei Xu ◽  
Yubo Dai ◽  
Wenhao Pan ◽  
...  
Keyword(s):  
Crystallite Size ◽  
Photoelectron Spectroscopy ◽  
Space Velocity ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Weight Hourly Space Velocity ◽  
Cerium Content ◽  
Adsorption Desorption ◽  
Hydrodesulfurization Activity

A series of ceria promoted Ni2P catalysts were prepared and evaluated in dibenzothiophene hydrodesulfurization steam. These catalysts were characterized by X-ray diffraction, N2 adsorption–desorption, CO chemisorptions, and X-ray photoelectron spectroscopy. The results showed that the addition of ceria into the bulk Ni2P catalyst was conducive to the formation of the Ni2P phase and contributed to a higher surface area, leading to a better dispersion and smaller crystallite size of Ni2P particles. The CexNi2P catalysts showed higher dibenzothiophene hydrodesulfurization activity than Ni2P catalyst and the Ce0.09Ni2P catalyst showed the highest dibenzothiophene hydrodesulfurization activity. The Ce0.09Ni2P catalyst showed a dibenzothiophene hydrodesulfurization conversion of 94.5% at the reaction conditions of 320°C, 4.0 MPa, a H2/oil ratio of 500 (V/V), and a weight hourly space velocity of 8.0 h−1. The dibenzothiophene was mainly transformed through desulfurization pathway.

Preparation of CuS/SiO2 Composite Modified Aerogel and Its Superoleophobic and Photocatalytic Properties

NANO ◽  
2020 ◽  
Vol 15 (02) ◽  
pp. 2050017
Author(s):  
Ke-Cheng Yang ◽  
Li-Hui Xu ◽  
Hong Pan ◽  
Li-Ming Wang ◽  
Yong Shen ◽  
...  
Keyword(s):  
Gas Adsorption ◽  
Ambient Pressure ◽  
Sol Gel ◽  
Photocatalytic Properties ◽  
X Ray Diffraction ◽  
Sliding Angle ◽  
Nitrogen Gas ◽  
Ir Spectrometry ◽  
X Ray ◽  
Ft Ir

In this study, CuS/SiO2 composite modified aerogel was prepared by the incorporation of hollow spherical CuS into methyltrimethoxysilane-based SiO2 sol and modification with hexadecafluorodecyltriethoxysilane via acid-base catalyzed sol–gel reaction and drying under ambient pressure. The CuS/SiO2 composite modified aerogel was characterized by Fourier-transform infrared (FT-IR) spectrometry, scanning electron microscope (SEM), nitrogen gas adsorption and desorption and X-ray diffraction (XRD), respectively. The effects of CuS and fluorosilane concentration on density and porosity of aerogel, oleophobic and photocatalytic properties were evaluated. The results showed that structure and physical properties of aerogel had some effect by introducing CuS and fluorosilane, and the CuS/SiO2 composite modified aerogel with density of 0.146[Formula: see text]g/cm3 and specific surface area of 241[Formula: see text]m2/g achieved super-oleophobicity with oil contact angle of 152.8∘ and sliding angle of 10∘, and good photocatalytic properties for methylene blue.

Sign in / Sign up

Export Citation Format

Share Document