scholarly journals Poly(2-isopropenyl-2-oxazoline) as a Versatile Platform for Multi-Functional Materials

Proceedings ◽  
2019 ◽  
Vol 29 (1) ◽  
pp. 71 ◽  
Author(s):  
Florica Adriana Jerca ◽  
Valentin Victor Jerca ◽  
Dumitru Mircea Vuluga ◽  
Richard Hoogenboom
Keyword(s):  
Functional Materials ◽  
Multifunctional Materials

Multifunctional materials are designed to meet specific requirements through tailored properties. [...]

ENERGY-BASED MULTIFUNCTIONAL EFFICIENCY METRIC FOR MULTIFUNCTIONAL COMPOSITE ANODES IN STRUCTURAL BATTERIES

2021 ◽  
Author(s):  
TIANYANG ZHOU ◽  
JAMES G. BOYD ◽  
DIMITRIS C. LAGOUDAS
Keyword(s):  
Total Energy ◽  
Silicon Nanoparticles ◽  
Mean Field ◽  
Elastic Strain Energy ◽  
Functional Materials ◽  
Upper And Lower Bounds ◽  
Multifunctional Materials ◽  
Property Variation ◽  
Structural Support ◽  
Composite Anodes

A multifunctional efficiency metric is developed using mean-field micromechanics solutions to quantify the multifunctionality of the multifunctional composite anodes. Multifunctional efficiency metrics evaluate the volume and/or mass savings or performance increase when structural and functional materials are replaced by multifunctional materials [1]. The proposed methodology compares the total energy associated with different functionalities, such as elastic strain energy and electric charge energy of the multifunctional materials with the total energy of the single function structural and functional material. To achieve volume and mass savings, the energy of different functionalities is set to be the same between the multifunctional and traditional single- functional materials, and, at the same time, the volume and/or mass of the multifunctional composite needs to be smaller than that of the combination of single- functional materials. The volumes and/or mass savings can be expressed using the properties of multifunctional and traditional single-functional materials. In this work, structural anodes made from silicon nanoparticles, reduced graphene oxide, and aramid nanofibers are used as an example to calculate the mass savings compared to a traditional anode with structural support. The existing multifunctionality metrics are based on the rule of mixtures method, which is adequate for certain geometries and loading conditions, such as in-plane directions for laminate composites. However, if multifunctional composite materials involve multiple phases, material property variation during the charging process, and complex geometries or orientations of the structural and functional phases, a more comprehensive method is required to accurately capture the multifunctional efficiency. The multifunctional efficiency varies significantly during the charging and discharging process. This new metric can provide both upper and lower bounds of multifunctional efficiency. This new multifunctional efficiency metric will help optimize the selection and arrangement of different phases in the multifunctional and quantify the optimization results.

scholarly journals Multifunctional materials for OFETs, LEFETs and NIR PLEDs

2014 ◽  
Vol 2 (26) ◽  
pp. 5133-5141 ◽  
Author(s):  
T. T. Steckler ◽  
M. J. Lee ◽  
Z. Chen ◽  
O. Fenwick ◽  
M. R. Andersson ◽  
...  
Keyword(s):  
Single Layer ◽  
Functional Materials ◽  
Host Material ◽  
Multifunctional Materials

Phthalimide–thiophene copolymers are multi-functional materials that possess reasonably high PLQEs, ambipolar mobilities, and perform extremely well as a host material for single layer NIR emitting PLEDs.

High Resolution Electron Microscopy of internal interfaces in layered materials

1990 ◽  
Vol 48 (4) ◽  
pp. 320-321
Author(s):  
Yoichi Ishida ◽  
Hideki Ichinose ◽  
Yutaka Takahashi ◽  
Jin-yeh Wang
Keyword(s):  
Grain Boundaries ◽  
Mirror Symmetry ◽  
Functional Materials ◽  
High Resolution Electron Microscopy ◽  
Layered Materials ◽  
Plane Boundary ◽  
Chemical Information ◽  
Layer Plane ◽  
High Tc ◽  
Cubic Metals

Layered materials draw attention in recent years in response to the world-wide drive to discover new functional materials. High-Tc superconducting oxide is one example. Internal interfaces in such layered materials differ significantly from those of cubic metals. They are often parallel to the layer of the neighboring crystals in sintered samples(layer plane boundary), while periodically ordered interfaces with the two neighboring crystals in mirror symmetry to each other are relatively rare. Consequently, the atomistic features of the interface differ significantly from those of cubic metals. In this paper grain boundaries in sintered high-Tc superconducting oxides, joined interfaces between engineering ceramics with metals, and polytype interfaces in vapor-deposited bicrystal are examined to collect atomic information of the interfaces in layered materials. The analysis proved that they are not neccessarily more complicated than that of simple grain boundaries in cubic metals. The interfaces are majorly layer plane type which is parallel to the compound layer. Secondly, chemical information is often available, which helps the interpretation of the interface atomic structure.

Pyridyl disulfide-based thiol–disulfide exchange reaction: shaping the design of redox-responsive polymeric materials

2020 ◽  
Vol 11 (48) ◽  
pp. 7603-7624
Author(s):  
Ismail Altinbasak ◽  
Mehmet Arslan ◽  
Rana Sanyal ◽  
Amitav Sanyal
Keyword(s):  
Exchange Reaction ◽  
Functional Materials ◽  
Polymeric Materials ◽  
Disulfide Exchange ◽  
Redox Responsive ◽  
Synthetic Approaches

This review provides an overview of synthetic approaches utilized to incorporate the thiol-reactive pyridyl-disulfide motif into various polymeric materials, and briefly highlights its utilization to obtain functional materials.

Bioactivity of Kalopanax septemlobus extracts for functional materials

Planta Medica ◽  
2012 ◽  
Vol 78 (11) ◽  
Author(s):  
SH Kim ◽  
MJ Lee ◽  
J Han ◽  
CE Lee
Keyword(s):  
Functional Materials ◽  
Kalopanax Septemlobus

Simply supported FPEDs connected by springs for broadband energy harvesting

2020 ◽  
Vol 64 (1-4) ◽  
pp. 201-210
Author(s):  
Yoshikazu Tanaka ◽  
Satoru Odake ◽  
Jun Miyake ◽  
Hidemi Mutsuda ◽  
Atanas A. Popov ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Evaluation Method ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Functional Materials ◽  
Vibration Energy ◽  
Theoretical Evaluation ◽  
Vibration Energy Harvester ◽  
Polyvinylidene Difluoride ◽  
Simply Supported

Energy harvesting methods that use functional materials have attracted interest because they can take advantage of an abundant but underutilized energy source. Most vibration energy harvester designs operate most effectively around their resonant frequency. However, in practice, the frequency band for ambient vibrational energy is typically broad. The development of technologies for broadband energy harvesting is therefore desirable. The authors previously proposed an energy harvester, called a flexible piezoelectric device (FPED), that consists of a piezoelectric film (polyvinylidene difluoride) and a soft material, such as silicon rubber or polyethylene terephthalate. The authors also proposed a system based on FPEDs for broadband energy harvesting. The system consisted of cantilevered FPEDs, with each FPED connected via a spring. Simply supported FPEDs also have potential for broadband energy harvesting, and here, a theoretical evaluation method is proposed for such a system. Experiments are conducted to validate the derived model.

The Therapeutic and Diagnostic Value of Fluorine

2020 ◽  
Vol 4 (1) ◽  
pp. 17-29
Author(s):  
Isma Attique ◽  
Shabbir Hussain ◽  
Muhammad Amjad ◽  
Khalida Nazir ◽  
Muhammad Shahid Nazir
Keyword(s):  
Anticancer Agent ◽  
Chemotherapeutic Agent ◽  
Functional Materials ◽  
Diagnostic Value ◽  
Vital Role ◽  
Malignant Growth ◽  
Medical Field ◽  
Active Nucleus ◽  
Broad Application ◽  
Tracer Atom

Fluorine has a useful positron transmitting isotope and it enjoys broad application in the medical field. It is utilized in fluorinated agents,therapeutic sciences and steroid field. Fluorine incorporation viafluoroalkylation is a useful approach in the development of new functional materials and in drug design. Fluorine also plays its role as an anticancer agent and is a successful chemotherapeutic agent for certain sorts of malignant growth. 5-fluorouracil plays a vital role in the treatment of cancer. 18 Facts as a radio label tracer atom in PET imaging. 19 F has the second most sensitive and stable NMR-active nucleus.

Calcium pyrophosphate powder synthesized from phosphoric acid and calcium carbonate

2020 ◽  
pp. 42-48
Author(s):  
Tatiana Safronova ◽  
◽  
Tatiana Shatalova ◽  
Snezhana Tikhonova ◽  
Yaroslav Filippov ◽  
...  
Keyword(s):  
Calcium Carbonate ◽  
Phosphoric Acid ◽  
Functional Materials ◽  
Bone Defects ◽  
Thermal Conversion ◽  
Calcium Pyrophosphate ◽  
Molar Ratio

Powders of calcium pyrophosphate Ca2P2O7 in the form of γ- и β-modifications have been produced as a result of thermal conversion of brushite CaHPO4∙2H2O synthesized from phosphoric acid H3PO4 and calcium carbonate CaCO3 at the molar ratio P / Ca = 1.1. The resulting powders can be used for production of various functional materials including biocompatible and bioresorbable ones for the treatment of bone defects.

Sign in / Sign up

Export Citation Format

Share Document