scholarly journals Specific Features of Mapping Large Discontinuous Faults by the Method of Electromagnetic Emission

Resources ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 135
Author(s):  
Emiliia Iakovleva ◽  
Margarita Belova ◽  
Amilcar Soares

In this paper, the authors consider the issue of processing the data of electromagnetic pulses (EMPs) recorded in mine workings and their interpretation. The Sami fault (Russia, the Murmansk region) was chosen as the object of the research. A number of experiments, including measuring the EMP level along the fault and the analysis of the results, were performed by the authors. The paper also presents a previously unconsidered method of transition from geological concepts to electro-technical ones, the aim of which is to identify the dependences of the amplitude of electromagnetic field anomalies on the parameters of active tectonic disturbances. The authors assumed the dependence of the amplitude of anomalies on the geological parameters of the rock mass and the thickness of the tectonic disturbance.

Author(s):  
Emiliia Iakovleva ◽  
Margarita Belova ◽  
Amilcar Soares

The paper presents an analysis of the method of recording the magnetic component of the Earth’s natural pulse electromagnetic field in an urban environment. This method of recording has already proved itself to be a method that allocates the stressed sections of rock mass at mining and, therefore, authors suppose its effectiveness for allocating active tectonic disturbances and forecasting accidents at underground utilities, what will help reduce the potential environmental hazard of these objects.


Geosciences ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 3
Author(s):  
Emiliia Iakovleva ◽  
Margarita Belova ◽  
Amilcar Soares

The paper presents an analysis of the method of recording the magnetic component of the Earth’s natural pulse electromagnetic field in an urban environment. This method of recording has already proved itself to be a method that allocates the stressed sections of rock mass at mining and, therefore, the authors consider it effective for allocating active tectonic disturbances and forecasting accidents at underground utilities, which will help reduce the potential environmental hazard of these objects.


2018 ◽  
Vol 41 ◽  
pp. 01007
Author(s):  
Yuriy Kutepov ◽  
Aleksandr Mironov ◽  
Maksim Sablin ◽  
Elena Borger

This article considers mining and geological conditions of the site “Blagodatny” of the mine named after A.D. Ruban located underneaththe old open pit coal mine and the hydraulic-mine dump. The potentially dangerous zones in the undermined rock mass have been identified based onthe conditions of formation of water inflow into mine workings. Safe depthof coal seams mining has been calculated depending on the type of water body – the hydraulic-mine dump.


Author(s):  
L.K. Miroshnikova ◽  
A.Yu. Mezentsev ◽  
G.A. Kadyralieva ◽  
M.A. Perepelkin

The Zhdanovskoe copper-nickel sulfide ores deposit is located in the north-west of the Murmansk region and is a mineral raw material source for JSC «Kola MMC». The main mining method used is sublevel caving. In some areas, due to the complex shape of the ore bodies, the open stoping mining method is used which requires determining stable parameters of stopes and pillars. It is necessary to study the stress-strain state of the deposit to ensure safe mining conditions. One of the possible solutions is the modeling of the stress-strain state of rock mass using the finite element method, for example, CAE Fidesys, which is FEMbased software. The use of CAE Fidesys for solving geomechanics tasks allows creating models of individual excavation units to determine the stability of stopes and pillars, and large-scale models that include several ore bodies and areas of the host rock mass. The article considers solutions of both types of geomechanic tasks using CAE Fidesys for conditions of the Zhdanovskoe deposit.


2020 ◽  
Vol 168 ◽  
pp. 00068
Author(s):  
Vasyl Zberovskyi ◽  
Kostiantyn Sofiiskyi ◽  
Rishard Stasevych ◽  
Artem Pazynych ◽  
Jan Pinka ◽  
...  

The paper represents the results of monitoring and evaluation of the efficiency of hydroimpulsive disintegration of outburst-prone coal seams in the stopes of development mine workings using a system of sound detecting facilities. Methods of acoustic emission control have been considered as well as the monitoring tasks to evaluate rock mass conditions before the procedure and after it inclusive of the results of sound accompaniment of hydraulic disintegration of the coal seam. It has been determined that the higher concentration of stresses within the rock mass is, the more efficient action of high frequency self-oscillations of cavitation transmitter is on both the fissuring and changes in gas-dynamic state of the coal seam. It has been recommended to apply a mode of impulsive fluid pumping under the conditions where coal seam is in the stress-strain state.


2020 ◽  
Author(s):  
Wim Vegt

Within the scope of this article, LIGHT has been considered as any arbitrary Electromagnetic Radiation within a very wide frequency range, because during the transformation from Visible Light into the Gravitational Electromagnetic Confinement, the frequency changes in a very wide range. This frequency transformation is possible because of the combined Lorentz / Doppler-Effect transformation during the collapse (contraction) of the radiation when the Gravitational Electromagnetic Confinement has been formed (Implosion of Visible Light). Within the scope of this article MATTER is considered to be any kind of 3-dimensional confined (Electromagnetic) energy. The inner structure of a photon is based on a 3-dimensional anisotropic equilibrium within the electromagnetic pulses in which an equilibrium does exist for the Electric and the Magnetic Fields separately generated by the pulses. A photon cannot be considered as a particle. Because particles are 3-dimensional confinements. Photons are anisotropic (in 1st and 2nd dimension a particle and in the 3rd dimension a wave) confinements of electromagnetic pulses, generated during the energy transitions within the atoms. Photons are 2-dimensional confinements of electromagnetic energy and demonstrate the property of inertia (electromagnetic mass) in the 2 directions of confinement. In the 3rd direction, the direction of propagation, photons can only be considered as an electromagnetic wave and for that reason do not demonstrate the property of inertia. Electromagnetic waves cannot be accelerated or decelerated because the speed of light is a universal constant. For that reason, photons interact with a gravitational field in an anisotropic way. Due to a gravitational field, photons can be accelerated or decelerated in the directions perpendicular to the direction of propagation and follow a curved path. But a gravitational field in the direction of propagation will have no impact on the speed of the photons, which will remain the unchanged universal constant, the speed of light. Photonics is the physical science of light based on the concept of “photons” introduced by Albert Einstein in the early 20th century. Einstein introduced this concept in the “particle-wave duality” discussion with Niels Bohr to demonstrate that even light has particle properties (mass and momentum) and wave properties (frequency). That concept became a metaphor and from that time on a beam of light has been generally considered as a beam of particles (photons). Which is a wrong understanding. Light particles do not exist. Photons are nothing else but electromagnetic complex wave configurations and light particles are not like “particles” but separated electromagnetic wave packages, 2-dimensionally confined in the directions perpendicular to the direction of propagation and in a perfect equilibrium with the radiation pressure and the inertia of electromagnetic energy in the forward direction, controlling the speed of light. This new theory will explain how electromagnetic wave packages demonstrate inertia, mass and momentum and which forces keep the wave packages together in a way that they can be measured like particles with their own specific mass and momentum. All we know about light, and in generally about any electromagnetic field configuration, has been based only on two fundamental theories. James Clerk Maxwell introduced in 1865 the “Theory of Electrodynamics” with the publication: “A Dynamical Theory of the Electromagnetic Field” and Albert Einstein introduced in 1905 the “Theory of Special Relativity” with the publication: “On the Electrodynamics of Moving Bodies” and in 1913 the “Theory of General Relativity” with the publication ”Outline of a Generalized Theory of Relativity and of a Theory of Gravitation”. However, both theories are not capable to explain the property of electromagnetic mass and in specific the anisotropy of the phenomenon of electromagnetic mass presented e.g. in a LASER beam. To understand what electromagnetic inertia and the corresponding electromagnetic mass is and how the anisotropy of electromagnetic mass can be explained and how it has to be defined, a New Theory about Light has to be developed. A part of this “New Theory about Light”, based on Newton’s well- known Equation in 3 dimensions will be published in this article in an extension into 4 dimensions. Newton’s 4-dimensional law in the 3 spatial dimensions results in an improved version of the classical Maxwell equations and Newton’s law in the 4th dimension (time) results in the quantum mechanical Schrödinger wave equation (at non-relativistic velocities) and the relativistic Dirac equation.


Author(s):  
Farkhodbek Umarov ◽  
◽  
Utkir Nasirov ◽  
Gafur Nutfulloev ◽  
Zoir Nazarov ◽  
...  

Introduction. Various techniques of breaking rock by explosion have currently been developed when tunneling underground mine workings, but asymmetrically directed stress fields application is of the main interest. Research aim is to study explosion energy distribution and maximum concentration deep down the blasted rock mass. Blast energy concentration may be achieved by using the principle of cumulation in the hole back by means of changing the design of the blasthole explosive charge. Methodology. Based on the analyzed literature and theoretical research it is recommended to use the design of a blasthole explosive charge with the use of Munroe effect, which makes it possible to increase the blasthole efficiency ratio (BER), reduce drilling activity, reach sharper design contours of mine workings and eliminate bootlegs. The action of blasthole explosive charges with Munroe effect has been theoretically investigated, hydrodynamic theory of cumulation has been studied, and the dependences have been determined between the liner’s collapsing angle alternation and the radius of the cone, its height, initial velocity, and cumulative jet velocity. Results. The main factors which determine the efficiency of the proposed new technique of blasting against the basic technique are the blasthole efficiency ratio, face advance pace after one blast, the amount of rock mass detached after one blast, and the granulometric composition of the blasted rock mass. Summary. The developed design of the blasthole explosive charge with Munroe effect makes it possible to increase BER, face advance per one cycle, and increase the amount of the broken rock mass.


2018 ◽  
Vol 19 ◽  
pp. 01001 ◽  
Author(s):  
Kazimierz Jakubiuk ◽  
Daniel Kowalak ◽  
Mikołaj Nowak

An impulse energy source, a power conditioning system and an electromagnetic field emitter are essential to generate an electromagnetic field pulse (EMFP) with a specific frequency bandwidth. Selected simulation results for a power conditioning system consisting of a fuse opening switch and a paraboloidal electromagnetic emitter have been presented in this article. The synthetic system examined in the simulation is powered by an impulse capacitor instead of a flux compression generator (FCG) used in practice. The obtained results confirm that pulse generation and emission of high-power EMFP is possible.


Sign in / Sign up

Export Citation Format

Share Document