scholarly journals Improvement of Remote Sensing-Based Assessment of Defoliation of Pinus spp. Caused by Thaumetopoea Pityocampa Denis and Schiffermüller and Related Environmental Drivers in Southeastern Spain

2019 ◽  
Vol 11 (14) ◽  
pp. 1736 ◽  
Author(s):  
Pérez-Romero ◽  
Navarro-Cerrillo ◽  
Palacios-Rodriguez ◽  
Acosta ◽  
Mesas-Carrascosa
Keyword(s):  
Remote Sensing ◽  
Google Earth ◽  
Environmental Data ◽  
Environmental Drivers ◽  
Series Data ◽  
Model Parameters ◽  
Summer Drought ◽  
Southeastern Spain ◽  
Pinus Species ◽  
Pinus Spp

This study used Landsat temporal series to describe defoliation levels due to the Pine Processionary Moth (PPM) in Pinus forests of southeastern Andalusia (Spain), utilizing Google Earth Engine. A combination of remotely sensed data and field survey data was used to detect the defoliation levels of different Pinus spp. and the main environmental drivers of the defoliation due to the PPM. Four vegetation indexes were also calculated for remote sensing defoliation assessment, both inside the stand and in a 60-m buffer area. In the area of study, all Pinus species are affected by defoliation due to the PPM, with a cyclic behavior that has been increasing in frequency in recent years. Defoliation levels were practically equal for all species, with a high increase in defoliation levels 2 and 3 since 2014. The Moisture Stress Index (MSI) and Normalized Difference Infrared Index (NDII) exhibited similar overall (P < 0.001) accuracy in the assessment of defoliation due to the PPM. The synchronization of NDII-defoliation data had a similar pattern for all together and individual Pinus species, showing the ability of this index to adjust the model parameters based on the characteristics of specific defoliation levels. Using Landsat-based NDII-defoliation maps and interpolated environmental data, we have shown that the PPM defoliation in southeastern Spain is driven by the minimum temperature in February and the precipitation in June, March, September, and October. Therefore, the NDII-defoliation assessment seems to be a general index that can be applied to forests in other areas. The trends of NDII-defoliation related to environmental variables showed the importance of summer drought stress in the expansion of the PPM on Mediterranean Pinus species. Our results confirm the potential of Landsat time-series data in the assessment of PPM defoliation and the spatiotemporal patterns of the PPM; hence, these data are a powerful tool that can be used to develop a fully operational system for the monitoring of insect damage.

Assessing and monitoring the vulnerability to drought and climate anomalies of Mediterranenan oak forests by using NDVI

2020 ◽  
Author(s):  
Maria Castellaneta ◽  
Angelo Rita ◽  
J. Julio Camarero ◽  
Michele Colangelo ◽  
Angelo Nolè ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Tree Mortality ◽  
Vegetation Index ◽  
Google Earth ◽  
Oak Forests ◽  
Summer Drought ◽  
Area Index ◽  
Ndvi Time Series ◽  
The Impact

&lt;p&gt;Several die-off episodes related to heat weaves and drought spells have evidenced the high vulnerability of Mediterranean oak forests. These events consisted in the loss in tree vitality and manifested as growths decline, elevated crown transparency (defoliation) and rising tree mortality rate. In this context, the changes in vegetation productivity and canopy greenness may represent valuable proxies to analyze how extreme climatic events trigger forest die-off. Such changes in vegetation status may be analyzed using remote-sensing data, specifically multi-temporal spectral information. For instance, the Normalized Difference Vegetation Index (NDVI) measures changes in vegetation greenness and is a proxy of changes in leaf area index (LAI), forest aboveground biomass and productivity. In this study, we analyzed the temporal patterns of vegetation in three Mediterranean oak forests showing recent die-off in response to the 2017 severe summer drought. For this purpose, we used an open-source platform (Google Earth Engine) to extract collections of MODIS NDVI time-series from 2000 to 2019. The analysis of both NDVI trends and anomalies were used to infer differential patterns of vegetation phenology among sites comparing plots where most trees were declining and showed high defoliation (test) versus plots were most trees were considered healthy (ctrl) and showed low or no defoliation. Here we discuss: i) the likely offset in NDVI time-series between test- versus ctrl- sites; and ii) the impact of summer droughts &amp;#160;on NDVI.&lt;/p&gt;&lt;p&gt;&lt;strong&gt;Keywords&lt;/strong&gt;: climate change, forest vulnerability, time series, remote sensing.&lt;/p&gt;

scholarly journals Sentinel-2 Analysis of Spruce Crown Transparency Levels and Their Environmental Drivers After Summer Drought in the Northern Eifel (Germany)

2021 ◽  
Vol 4 ◽  
Author(s):  
Carsten Montzka ◽  
Bagher Bayat ◽  
Andreas Tewes ◽  
David Mengen ◽  
Harry Vereecken
Keyword(s):  
Satellite Data ◽  
Land Surface ◽  
Google Earth ◽  
Training Data ◽  
Cumulative Distribution ◽  
Environmental Drivers ◽  
Summer Drought ◽  
Data Set ◽  
Crown Transparency ◽  
Sentinel 2

Droughts in recent years weaken the forest stands in Central Europe, where especially the spruce suffers from an increase in defoliation and mortality. Forest surveys monitor this trend based on sample trees at the local scale, whereas earth observation is able to provide area-wide information. With freely available cloud computing infrastructures such as Google Earth Engine, access to satellite data and high-performance computing resources has become straightforward. In this study, a simple approach for supporting the spruce monitoring by Sentinel-2 satellite data is developed. Based on forest statistics and the spruce NDVI cumulative distribution function of a reference year, a training data set is obtained to classify the satellite data of a target year. This provides insights into the changes in tree crown transparency levels. For the Northern Eifel region, Germany, the evaluation shows an increase in damaged trees from 2018 to 2020, which is in line with the forest inventory of North Rhine-Westphalia. An analysis of tree damages according to precipitation, land surface temperature, elevation, aspect, and slope provides insights into vulnerable spruce habitats of the region and enables to identify locations where the forest management may focus on a transformation from spruce monocultures to mixed forests with higher biodiversity and resilience to further changes in the climate system.

scholarly journals Pan-European Mapping of Underutilized Land for Bioenergy Production

Land ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 102
Author(s):  
Manuela Hirschmugl ◽  
Carina Sobe ◽  
Cosette Khawaja ◽  
Rainer Janssen ◽  
Lorenzo Traverso
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Renewable Energy ◽  
Time Series Data ◽  
Renewable Energy Sources ◽  
Google Earth ◽  
Series Data ◽  
Landsat 8 ◽  
Bioenergy Production ◽  
Biogeographical Region

This study aims at identifying underutilized land potentially suitable for bioenergy production in Europe by means of remote sensing time series analysis. The background is the Revised Renewable Energy Directive (REDII) requesting that 32% of Europe’s energy production shall come from renewable energy sources until 2030. In order to avoid the food versus fuel debate, we only considered land that has not been used in the previous five years. Satellite remote sensing is the only technique that allows for the assessment of the usage of land for such a long time span at the pan-European scale with reasonable efforts. We used Landsat 8 (L8) data for the full five year time period 2015–2019 and included additional Sentinel-2 (S2) data for 2018 and 2019. The analysis was based on a stratified approach for biogeographical regions and countries using Google Earth Engine. To our knowledge, this is the first work that employs high resolution time series data for pan-European mapping of underutilized land. The average patch size of underutilized land was found to be between 23.2 ha and 49.6 ha, depending on the biogeographical region. The results show an overall accuracy of more than 85% with a confidence interval (CI) of 1.55% at the 95% confidence level (CL). The classification suggests that at total of 5.3 million ha of underutilized land in Europe is potentially available for agricultural bioenergy production.

scholarly journals Evolution of Surge-Type Glaciers in the Yangtze River Headwater Using Multi-Source Remote Sensing Data

2019 ◽  
Vol 11 (24) ◽  
pp. 2991 ◽  
Author(s):  
Jin Yan ◽  
Mingyang Lv ◽  
Zhixing Ruan ◽  
Shiyong Yan ◽  
Guang Liu
Keyword(s):  
Remote Sensing ◽  
Flow Velocity ◽  
Yangtze River ◽  
Stable State ◽  
Remote Sensing Data ◽  
Radar Data ◽  
Series Data ◽  
The Yangtze River ◽  
Glacier Surges ◽  
Short Time

A surge-type glacier is a special and dangerous type of glacier, which can advance quickly in a short-time with cycles. Glaciers in the Yangtze River headwater are generally acknowledged to be in a stable state. However, not all of those glaciers are stable. In this paper, five glaciers from the Yangtze River headwater glacier were selected as the experimental subjects, and multi-source remote sensing images were used to study and analyze the surge behavior over the past 30 years. Based on the Landsat series data, ERS-2, and ENVISAT radar data, this paper extracts the glacier centerline information, glacial area information, and glacial flow velocity during different time periods from 1988 to 2018, which are used to monitor the active periods of glacier surges. We found three surge-type glaciers in the study area. The glacial characteristics of the three glaciers showed some drastic changes, they can advance quickly nearly 800 m in active periods, their area change can reach 2.0 × 106 m2, and their flow velocity can suddenly increase by dozens of times. Surging periods and the initiated time of the three glaciers are different, which are locked in 1997, 2003, and 1997–1998. All those surges ended within one to two years. We suggest that the surges in this paper are dominated by hydrological conditions.

scholarly journals Assessing the Effect of Training Sampling Design on the Performance of Machine Learning Classifiers for Land Cover Mapping Using Multi-Temporal Remote Sensing Data and Google Earth Engine

2021 ◽  
Vol 13 (8) ◽  
pp. 1433
Author(s):  
Shobitha Shetty ◽  
Prasun Kumar Gupta ◽  
Mariana Belgiu ◽  
S. K. Srivastav
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Random Sampling ◽  
Sampling Design ◽  
Remote Sensing Data ◽  
Google Earth ◽  
Machine Learning Classifiers ◽  
Learning Classifiers ◽  
Multi Temporal ◽  
Google Earth Engine

Machine learning classifiers are being increasingly used nowadays for Land Use and Land Cover (LULC) mapping from remote sensing images. However, arriving at the right choice of classifier requires understanding the main factors influencing their performance. The present study investigated firstly the effect of training sampling design on the classification results obtained by Random Forest (RF) classifier and, secondly, it compared its performance with other machine learning classifiers for LULC mapping using multi-temporal satellite remote sensing data and the Google Earth Engine (GEE) platform. We evaluated the impact of three sampling methods, namely Stratified Equal Random Sampling (SRS(Eq)), Stratified Proportional Random Sampling (SRS(Prop)), and Stratified Systematic Sampling (SSS) upon the classification results obtained by the RF trained LULC model. Our results showed that the SRS(Prop) method favors major classes while achieving good overall accuracy. The SRS(Eq) method provides good class-level accuracies, even for minority classes, whereas the SSS method performs well for areas with large intra-class variability. Toward evaluating the performance of machine learning classifiers, RF outperformed Classification and Regression Trees (CART), Support Vector Machine (SVM), and Relevance Vector Machine (RVM) with a >95% confidence level. The performance of CART and SVM classifiers were found to be similar. RVM achieved good classification results with a limited number of training samples.

scholarly journals Development of Tools for Coastal Management in Google Earth Engine: Uncertainty Bathtub Model and Bruun Rule

2021 ◽  
Vol 13 (8) ◽  
pp. 1424
Author(s):  
Lucas Terres de Lima ◽  
Sandra Fernández-Fernández ◽  
João Francisco Gonçalves ◽  
Luiz Magalhães Filho ◽  
Cristina Bernardes
Keyword(s):  
Sea Level Rise ◽  
Sea Level ◽  
Coastal Management ◽  
Google Earth ◽  
Environmental Data ◽  
Planetary Scale ◽  
Bruun Rule ◽  
Source Models ◽  
Google Earth Engine ◽  
Bathtub Model

Sea-level rise is a problem increasingly affecting coastal areas worldwide. The existence of free and open-source models to estimate the sea-level impact can contribute to improve coastal management. This study aims to develop and validate two different models to predict the sea-level rise impact supported by Google Earth Engine (GEE)—a cloud-based platform for planetary-scale environmental data analysis. The first model is a Bathtub Model based on the uncertainty of projections of the sea-level rise impact module of TerrSet—Geospatial Monitoring and Modeling System software. The validation process performed in the Rio Grande do Sul coastal plain (S Brazil) resulted in correlations from 0.75 to 1.00. The second model uses the Bruun rule formula implemented in GEE and can determine the coastline retreat of a profile by creatting a simple vector line from topo-bathymetric data. The model shows a very high correlation (0.97) with a classical Bruun rule study performed in the Aveiro coast (NW Portugal). Therefore, the achieved results disclose that the GEE platform is suitable to perform these analysis. The models developed have been openly shared, enabling the continuous improvement of the code by the scientific community.

scholarly journals The use of remote sensing satellite using deep learning in emergency monitoring of high-level landslides disaster in Jinsha River

2021 ◽  
Author(s):  
Leijin Long ◽  
Feng He ◽  
Hongjiang Liu
Keyword(s):  
Remote Sensing ◽  
Southwest China ◽  
Influence Factors ◽  
Classification Error ◽  
Model Parameters ◽  
Detection Accuracy ◽  
Remote Sensing Images ◽  
Jinsha River ◽  
Detection Model ◽  
High Level

AbstractIn order to monitor the high-level landslides frequently occurring in Jinsha River area of Southwest China, and protect the lives and property safety of people in mountainous areas, the data of satellite remote sensing images are combined with various factors inducing landslides and transformed into landslide influence factors, which provides data basis for the establishment of landslide detection model. Then, based on the deep belief networks (DBN) and convolutional neural network (CNN) algorithm, two landslide detection models DBN and convolutional neural-deep belief network (CDN) are established to monitor the high-level landslide in Jinsha River. The influence of the model parameters on the landslide detection results is analyzed, and the accuracy of DBN and CDN models in dealing with actual landslide problems is compared. The results show that when the number of neurons in the DBN is 100, the overall error is the minimum, and when the number of learning layers is 3, the classification error is the minimum. The detection accuracy of DBN and CDN is 97.56% and 97.63%, respectively, which indicates that both DBN and CDN models are feasible in dealing with landslides from remote sensing images. This exploration provides a reference for the study of high-level landslide disasters in Jinsha River.

scholarly journals Estimating Forest Canopy Cover by Multiscale Remote Sensing in Northeast Jiangxi, China

Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 433
Author(s):  
Xiaolan Huang ◽  
Weicheng Wu ◽  
Tingting Shen ◽  
Lifeng Xie ◽  
Yaozu Qin ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Large Scale ◽  
Forest Canopy ◽  
Canopy Cover ◽  
Google Earth ◽  
Tree Canopy ◽  
Landsat Data ◽  
High Resolution Data ◽  
Modis Ndvi ◽  
Tree Canopy Cover

This research was focused on estimation of tree canopy cover (CC) by multiscale remote sensing in south China. The key aim is to establish the relationship between CC and woody NDVI (NDVIW) or to build a CC-NDVIW model taking northeast Jiangxi as an example. Based on field CC measurements, this research used Google Earth as a complementary source to measure CC. In total, 63 sample plots of CC were created, among which 45 were applied for modeling and the remaining 18 were employed for verification. In order to ascertain the ratio R of NDVIW to the satellite observed NDVI, a 20-year time-series MODIS NDVI dataset was utilized for decomposition to obtain the NDVIW component, and then the ratio R was calculated with the equation R = (NDVIW/NDVI) *100%, respectively, for forest (CC >60%), medium woodland (CC = 25–60%) and sparse woodland (CC 1–25%). Landsat TM and OLI images that had been orthorectified by the provider USGS were atmospherically corrected using the COST model and used to derive NDVIL. R was multiplied for the NDVIL image to extract the woody NDVI (NDVIWL) from Landsat data for each of these plots. The 45 plots of CC data were linearly fitted to the NDVIWL, and a model with CC = 103.843 NDVIW + 6.157 (R2 = 0.881) was obtained. This equation was applied to predict CC at the 18 verification plots and a good agreement was found (R2 = 0.897). This validated CC-NDVIW model was further applied to the woody NDVI of forest, medium woodland and sparse woodland derived from Landsat data for regional CC estimation. An independent group of 24 measured plots was utilized for validation of the results, and an accuracy of 83.0% was obtained. Thence, the developed model has high predictivity and is suitable for large-scale estimation of CC using high-resolution data.

scholarly journals Machine Learning Comparison and Parameter Setting Methods for the Detection of Dump Sites for Construction and Demolition Waste Using the Google Earth Engine

2021 ◽  
Vol 13 (4) ◽  
pp. 787
Author(s):  
Lei Zhou ◽  
Ting Luo ◽  
Mingyi Du ◽  
Qiang Chen ◽  
Yang Liu ◽  
...  
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Google Earth ◽  
Construction And Demolition Waste ◽  
Parameterization Scheme ◽  
Classification Methods ◽  
Demolition Waste ◽  
Optimal Method ◽  
Identification Method ◽  
Google Earth Engine

Machine learning has been successfully used for object recognition within images. Due to the complexity of the spectrum and texture of construction and demolition waste (C&DW), it is difficult to construct an automatic identification method for C&DW based on machine learning and remote sensing data sources. Machine learning includes many types of algorithms; however, different algorithms and parameters have different identification effects on C&DW. Exploring the optimal method for automatic remote sensing identification of C&DW is an important approach for the intelligent supervision of C&DW. This study investigates the megacity of Beijing, which is facing high risk of C&DW pollution. To improve the classification accuracy of C&DW, buildings, vegetation, water, and crops were selected as comparative training samples based on the Google Earth Engine (GEE), and Sentinel-2 was used as the data source. Three classification methods of typical machine learning algorithms (classification and regression trees (CART), random forest (RF), and support vector machine (SVM)) were selected to classify the C&DW from remote sensing images. Using empirical methods, the experimental trial method, and the grid search method, the optimal parameterization scheme of the three classification methods was studied to determine the optimal method of remote sensing identification of C&DW based on machine learning. Through accuracy evaluation and ground verification, the overall recognition accuracies of CART, RF, and SVM for C&DW were 73.12%, 98.05%, and 85.62%, respectively, under the optimal parameterization scheme determined in this study. Among these algorithms, RF was a better C&DW identification method than were CART and SVM when the number of decision trees was 50. This study explores the robust machine learning method for automatic remote sensing identification of C&DW and provides a scientific basis for intelligent supervision and resource utilization of C&DW.

Sign in / Sign up

Export Citation Format

Share Document