scholarly journals Fourier Domain Anomaly Detection and Spectral Fusion for Stripe Noise Removal of TIR Imagery

2020 ◽  
Vol 12 (22) ◽  
pp. 3714
Author(s):  
Qingjie Zeng ◽  
Hanlin Qin ◽  
Xiang Yan ◽  
Tingwu Yang
Keyword(s):  
Remote Sensing ◽  
Anomaly Detection ◽  
Real Life ◽  
Image Data ◽  
Noise Removal ◽  
Fourier Domain ◽  
Transform Domain ◽  
Noise Pattern ◽  
Original Spectrum ◽  
Weight Map

Stripe noise is a common and unwelcome noise pattern in various thermal infrared (TIR) image data including conventional TIR images and remote sensing TIR spectral images. Most existing stripe noise removal (destriping) methods are often difficult to keep a good and robust efficacy in dealing with the real-life complex noise cases. In this paper, based on the intrinsic spectral properties of TIR images and stripe noise, we propose a novel two-stage transform domain destriping method called Fourier domain anomaly detection and spectral fusion (ADSF). Considering the principal frequencies polluted by stripe noise as outliers in the statistical spectrum of TIR images, our naive idea is first to detect the potential anomalies and then correct them effectively in the Fourier domain to reconstruct a desired destriping result. More specifically, anomaly detection for stripe frequencies is achieved through a regional comparison between the original spectrum and the expected spectrum that statistically follows a generalized Laplacian regression model, and then an anomaly weight map is generated accordingly. In the correction stage, we propose a guidance-image-based spectrum fusion strategy, which integrates the original spectrum and the spectrum of a guidance image via the anomaly weight map. The final reconstruction result not only has no stripe noise but also maintains image structures and details well. Extensive real experiments are performed on conventional TIR images and remote sensing spectral images, respectively. The qualitative and quantitative assessment results demonstrate the superior effectiveness and strong robustness of the proposed method.

scholarly journals Improved SinGAN Integrated with an Attentional Mechanism for Remote Sensing Image Classification

2021 ◽  
Vol 13 (9) ◽  
pp. 1713
Author(s):  
Songwei Gu ◽  
Rui Zhang ◽  
Hongxia Luo ◽  
Mengyao Li ◽  
Huamei Feng ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Real Life ◽  
Attention Mechanism ◽  
Training Data ◽  
Generative Adversarial Networks ◽  
Natural Image ◽  
Remote Sensing Images ◽  
Training Time ◽  
Adversarial Networks ◽  
Remote Sensing Image Classification

Deep learning is an important research method in the remote sensing field. However, samples of remote sensing images are relatively few in real life, and those with markers are scarce. Many neural networks represented by Generative Adversarial Networks (GANs) can learn from real samples to generate pseudosamples, rather than traditional methods that often require more time and man-power to obtain samples. However, the generated pseudosamples often have poor realism and cannot be reliably used as the basis for various analyses and applications in the field of remote sensing. To address the abovementioned problems, a pseudolabeled sample generation method is proposed in this work and applied to scene classification of remote sensing images. The improved unconditional generative model that can be learned from a single natural image (Improved SinGAN) with an attention mechanism can effectively generate enough pseudolabeled samples from a single remote sensing scene image sample. Pseudosamples generated by the improved SinGAN model have stronger realism and relatively less training time, and the extracted features are easily recognized in the classification network. The improved SinGAN can better identify sub-jects from images with complex ground scenes compared with the original network. This mechanism solves the problem of geographic errors of generated pseudosamples. This study incorporated the generated pseudosamples into training data for the classification experiment. The result showed that the SinGAN model with the integration of the attention mechanism can better guarantee feature extraction of the training data. Thus, the quality of the generated samples is improved and the classification accuracy and stability of the classification network are also enhanced.

scholarly journals Archaeological Surveying of Subarctic and Arctic Landscapes: Comparing the Performance of Airborne Laser Scanning and Remote Sensing Image Data

2021 ◽  
Vol 13 (4) ◽  
pp. 1917
Author(s):  
Alma Elizabeth Thuestad ◽  
Ole Risbøl ◽  
Jan Ingolf Kleppe ◽  
Stine Barlindhaug ◽  
Elin Rose Myrvoll
Keyword(s):  
Remote Sensing ◽  
Laser Scanning ◽  
Digital Terrain Model ◽  
Image Data ◽  
Remote Sensing Image ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Detection Rates ◽  
Airborne Laser ◽  
Pros And Cons

What can remote sensing contribute to archaeological surveying in subarctic and arctic landscapes? The pros and cons of remote sensing data vary as do areas of utilization and methodological approaches. We assessed the applicability of remote sensing for archaeological surveying of northern landscapes using airborne laser scanning (LiDAR) and satellite and aerial images to map archaeological features as a basis for (a) assessing the pros and cons of the different approaches and (b) assessing the potential detection rate of remote sensing. Interpretation of images and a LiDAR-based bare-earth digital terrain model (DTM) was based on visual analyses aided by processing and visualizing techniques. 368 features were identified in the aerial images, 437 in the satellite images and 1186 in the DTM. LiDAR yielded the better result, especially for hunting pits. Image data proved suitable for dwellings and settlement sites. Feature characteristics proved a key factor for detectability, both in LiDAR and image data. This study has shown that LiDAR and remote sensing image data are highly applicable for archaeological surveying in northern landscapes. It showed that a multi-sensor approach contributes to high detection rates. Our results have improved the inventory of archaeological sites in a non-destructive and minimally invasive manner.

scholarly journals A Public Dataset for Fine-Grained Ship Classification in Optical Remote Sensing Images

2021 ◽  
Vol 13 (4) ◽  
pp. 747
Author(s):  
Yanghua Di ◽  
Zhiguo Jiang ◽  
Haopeng Zhang
Keyword(s):  
Remote Sensing ◽  
Image Data ◽  
Remote Sensing Image ◽  
Google Earth ◽  
Optical Remote Sensing ◽  
Remote Sensing Images ◽  
Visual Categorization ◽  
Class Differences ◽  
Fine Grained ◽  
Ship Classification

Fine-grained visual categorization (FGVC) is an important and challenging problem due to large intra-class differences and small inter-class differences caused by deformation, illumination, angles, etc. Although major advances have been achieved in natural images in the past few years due to the release of popular datasets such as the CUB-200-2011, Stanford Cars and Aircraft datasets, fine-grained ship classification in remote sensing images has been rarely studied because of relative scarcity of publicly available datasets. In this paper, we investigate a large amount of remote sensing image data of sea ships and determine most common 42 categories for fine-grained visual categorization. Based our previous DSCR dataset, a dataset for ship classification in remote sensing images, we collect more remote sensing images containing warships and civilian ships of various scales from Google Earth and other popular remote sensing image datasets including DOTA, HRSC2016, NWPU VHR-10, We call our dataset FGSCR-42, meaning a dataset for Fine-Grained Ship Classification in Remote sensing images with 42 categories. The whole dataset of FGSCR-42 contains 9320 images of most common types of ships. We evaluate popular object classification algorithms and fine-grained visual categorization algorithms to build a benchmark. Our FGSCR-42 dataset is publicly available at our webpages.

scholarly journals Remote Sensing and Machine Learning in Crop Phenotyping and Management, with an Emphasis on Applications in Strawberry Farming

2021 ◽  
Vol 13 (3) ◽  
pp. 531
Author(s):  
Caiwang Zheng ◽  
Amr Abd-Elrahman ◽  
Vance Whitaker
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Precision Agriculture ◽  
Image Data ◽  
Fruit Shape ◽  
Biological Information ◽  
Genetic Traits ◽  
Multiple Sensors ◽  
Fruit Maturity ◽  
High Throughput Phenotyping

Measurement of plant characteristics is still the primary bottleneck in both plant breeding and crop management. Rapid and accurate acquisition of information about large plant populations is critical for monitoring plant health and dissecting the underlying genetic traits. In recent years, high-throughput phenotyping technology has benefitted immensely from both remote sensing and machine learning. Simultaneous use of multiple sensors (e.g., high-resolution RGB, multispectral, hyperspectral, chlorophyll fluorescence, and light detection and ranging (LiDAR)) allows a range of spatial and spectral resolutions depending on the trait in question. Meanwhile, computer vision and machine learning methodology have emerged as powerful tools for extracting useful biological information from image data. Together, these tools allow the evaluation of various morphological, structural, biophysical, and biochemical traits. In this review, we focus on the recent development of phenomics approaches in strawberry farming, particularly those utilizing remote sensing and machine learning, with an eye toward future prospects for strawberries in precision agriculture. The research discussed is broadly categorized according to strawberry traits related to (1) fruit/flower detection, fruit maturity, fruit quality, internal fruit attributes, fruit shape, and yield prediction; (2) leaf and canopy attributes; (3) water stress; and (4) pest and disease detection. Finally, we present a synthesis of the potential research opportunities and directions that could further promote the use of remote sensing and machine learning in strawberry farming.

Unsupervised labelling of remote sensing images based on force field clustering

2021 ◽  
pp. 1-14
Author(s):  
Zhenggang Wang ◽  
Jin Jin
Keyword(s):  
Remote Sensing ◽  
Force Field ◽  
Image Data ◽  
Model Parameters ◽  
Remote Sensing Images ◽  
Initial Cluster ◽  
Data Points ◽  
Global Optimal ◽  
Density Force

Remote sensing image segmentation provides technical support for decision making in many areas of environmental resource management. But, the quality of the remote sensing images obtained from different channels can vary considerably, and manually labeling a mass amount of image data is too expensive and Inefficiently. In this paper, we propose a point density force field clustering (PDFC) process. According to the spectral information from different ground objects, remote sensing superpixel points are divided into core and edge data points. The differences in the densities of core data points are used to form the local peak. The center of the initial cluster can be determined by the weighted density and position of the local peak. An iterative nebular clustering process is used to obtain the result, and a proposed new objective function is used to optimize the model parameters automatically to obtain the global optimal clustering solution. The proposed algorithm can cluster the area of different ground objects in remote sensing images automatically, and these categories are then labeled by humans simply.

Sign in / Sign up

Export Citation Format

Share Document