scholarly journals The Horizontal Distribution of Branch Biomass in European Beech: A Model Based on Measurements and TLS Based Proxies

2021 ◽  
Vol 13 (5) ◽  
pp. 1041
Author(s):  
César Pérez-Cruzado ◽  
Christoph Kleinn ◽  
Paul Magdon ◽  
Juan Gabriel Álvarez-González ◽  
Steen Magnussen ◽  
...  
Keyword(s):  
Empirical Model ◽  
Laser Scanning ◽  
European Beech ◽  
Horizontal Distribution ◽  
Forest Monitoring ◽  
Projection Area ◽  
Biomass Estimation ◽  
Tree Biomass ◽  
Individual Tree ◽  
Individual Trees

Forest biomass is currently among the most important and most researched target variables in forest monitoring. The common approach of observing individual tree biomass in forest inventory is to assign the total tree biomass to the dimensionless point of the tree position. However, the tree biomass, in particular in the crown, is horizontally distributed above the crown projection area. This horizontal distribution of individual tree biomass (HBD) has not attracted much attention—but if quantified, it can improve biomass estimation and help to better represent the spatial distribution of forest fuel. In this study, we derive a first empirical model of the branch HBD for individual trees of European beech (Fagus sylvatica L.). We destructively measured 23 beech trees to derive an empirical model for the branch HBD. We then applied Terrestrial Laser Scanning (TLS) to a subset of 17 trees to test a simple point cloud metric predicting the branch HBD. We observed similarities between a branch HBD and commonly applied taper functions, which inspired our HBD model formulations. The models performed well in representing the HBD both for the measured biomass, and the TLS-based metric. Our models may be used as first approximations to the HBD of individual trees—while our methodological approach may extend to trees of different sizes and species.

scholarly journals Adjudicating Perspectives on Forest Structure: How Do Airborne, Terrestrial, and Mobile Lidar-Derived Estimates Compare?

2021 ◽  
Vol 13 (12) ◽  
pp. 2297
Author(s):  
Jonathon J. Donager ◽  
Andrew J. Sánchez Meador ◽  
Ryan C. Blackburn
Keyword(s):  
Ponderosa Pine ◽  
Laser Scanning ◽  
Canopy Cover ◽  
Basal Area ◽  
Tree Height ◽  
Absolute Error ◽  
Forest Monitoring ◽  
Individual Tree ◽  
Structural Configurations ◽  
Individual Trees

Applications of lidar in ecosystem conservation and management continue to expand as technology has rapidly evolved. An accounting of relative accuracy and errors among lidar platforms within a range of forest types and structural configurations was needed. Within a ponderosa pine forest in northern Arizona, we compare vegetation attributes at the tree-, plot-, and stand-scales derived from three lidar platforms: fixed-wing airborne (ALS), fixed-location terrestrial (TLS), and hand-held mobile laser scanning (MLS). We present a methodology to segment individual trees from TLS and MLS datasets, incorporating eigen-value and density metrics to locate trees, then assigning point returns to trees using a graph-theory shortest-path approach. Overall, we found MLS consistently provided more accurate structural metrics at the tree- (e.g., mean absolute error for DBH in cm was 4.8, 5.0, and 9.1 for MLS, TLS and ALS, respectively) and plot-scale (e.g., R2 for field observed and lidar-derived basal area, m2 ha−1, was 0.986, 0.974, and 0.851 for MLS, TLS, and ALS, respectively) as compared to ALS and TLS. While TLS data produced estimates similar to MLS, attributes derived from TLS often underpredicted structural values due to occlusion. Additionally, ALS data provided accurate estimates of tree height for larger trees, yet consistently missed and underpredicted small trees (≤35 cm). MLS produced accurate estimates of canopy cover and landscape metrics up to 50 m from plot center. TLS tended to underpredict both canopy cover and patch metrics with constant bias due to occlusion. Taking full advantage of minimal occlusion effects, MLS data consistently provided the best individual tree and plot-based metrics, with ALS providing the best estimates for volume, biomass, and canopy cover. Overall, we found MLS data logistically simple, quickly acquirable, and accurate for small area inventories, assessments, and monitoring activities. We suggest further work exploring the active use of MLS for forest monitoring and inventory.

ESTIMATING SINGLE TREE STEM AND BRANCH BIOMASS USING TERRESTRIAL LASER SCANNING

2015 ◽  
Vol 77 (26) ◽  
Author(s):  
Nurliyana Izzati Ishak ◽  
Md Afif Abu Bakar ◽  
Muhammad Zulkarnain Abdul Rahman ◽  
Abd Wahid Rasib ◽  
Kasturi Devi Kanniah ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Stem Volume ◽  
Biomass Estimation ◽  
Forest Plot ◽  
Individual Tree ◽  
Matching Process ◽  
Branch Biomass ◽  
Individual Trees ◽  
Tree Stem

This paper presents a novel non-destructive approach for individual tree stem and branch biomass estimation using terrestrial laser scanning data. The study area is located at the Royal Belum Reserved Forest area, Gerik, Perak. Each forest plot was designed with a circular shape and contains several scanning locations to ensure good visibility of each tree. Unique tree signage was located on trees with diameter at breast height (DBH) of 10cm and above.  Extractions of individual trees were done manually and the matching process with the field collected tree properties were relied on the tree signage and tree location as collected by total station. Individual tree stems were reconstructed based on cylinder models from which the total stem volume was calculated. Biomass of individual tree stems was calculated by multiplying stem volume with specific wood density. Biomass of individual was estimated using similar concept of tree stem with the volume estimated from alpha-hull shape. The root mean squared errors (RMSE) of estimated biomass are 50.22kg and 27.20kg for stem and branch respectively. 

scholarly journals Deriving Individual-Tree Biomass from Effective Crown Data Generated by Terrestrial Laser Scanning

2019 ◽  
Vol 11 (23) ◽  
pp. 2793
Author(s):  
Yujie Zheng ◽  
Weiwei Jia ◽  
Qiang Wang ◽  
Xu Huang
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Tree Height ◽  
Biomass Estimation ◽  
Tree Biomass ◽  
Crown Height ◽  
Individual Tree ◽  
Cloud Data ◽  
Biomass Equations

Biomass reflects the state of forest management and is critical for assessing forest benefits and carbon storage. The effective crown is the region above the lower limit of the forest crown that includes the maximum vertical distribution density of branches and leaves; this component plays an important role in tree growth. Adding the effective crown to biomass equations can enhance the accuracy of the derived biomass. Six sample plots in a larch plantation (ranging in area from 0.06 ha to 0.12 ha and in number of trees from 63 to 96) at the Mengjiagang forest farm in Huanan County, Jiamusi City, Heilongjiang Province, China, were analyzed in this study. Terrestrial laser scanning (TLS) was used to obtain three-dimensional point cloud data on the trees, from which crown parameters at different heights were extracted. These parameters were used to determine the position of the effective crown. Moreover, effective crown parameters were added to biomass equations with tree height as the sole variable to improve the accuracy of the derived individual-tree biomass estimates. The results showed that the minimum crown contact height was very similar to the effective crown height, and an increase in model accuracy was apparent (with R a 2 increasing from 0.846 to 0.910 and root-mean-square error (RMSE) decreasing from 0.372 kg to 0.286 kg). The optimal model for deriving biomass included tree height, crown length from minimum contact height, crown height from minimum contact height, and crown surface area from minimum contact height. The novelty of the article is that it improves the fit of individual-tree biomass models by adding crown-related variables and investigates how the accuracy of biomass estimation can be enhanced by using remote sensing methods without obtaining diameter at breast height.

scholarly journals LiDAR Applications to Estimate Forest Biomass at Individual Tree Scale: Opportunities, Challenges and Future Perspectives

Forests ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 550
Author(s):  
Dandan Xu ◽  
Haobin Wang ◽  
Weixin Xu ◽  
Zhaoqing Luan ◽  
Xia Xu
Keyword(s):  
Remote Sensing ◽  
Laser Scanning ◽  
Forest Biomass ◽  
Remotely Sensed ◽  
Tree Level ◽  
Biomass Estimation ◽  
Future Perspectives ◽  
Individual Tree ◽  
The Individual ◽  
Individual Trees

Accurate forest biomass estimation at the individual tree scale is the foundation of timber industry and forest management. It plays an important role in explaining ecological issues and small-scale processes. Remotely sensed images, across a range of spatial and temporal resolutions, with their advantages of non-destructive monitoring, are widely applied in forest biomass monitoring at global, ecoregion or community scales. However, the development of remote sensing applications for forest biomass at the individual tree scale has been relatively slow due to the constraints of spatial resolution and evaluation accuracy of remotely sensed data. With the improvements in platforms and spatial resolutions, as well as the development of remote sensing techniques, the potential for forest biomass estimation at the single tree level has been demonstrated. However, a comprehensive review of remote sensing of forest biomass scaled at individual trees has not been done. This review highlights the theoretical bases, challenges and future perspectives for Light Detection and Ranging (LiDAR) applications of individual trees scaled to whole forests. We summarize research on estimating individual tree volume and aboveground biomass (AGB) using Terrestrial Laser Scanning (TLS), Airborne Laser Scanning (ALS), Unmanned Aerial Vehicle Laser Scanning (UAV-LS) and Mobile Laser Scanning (MLS, including Vehicle-borne Laser Scanning (VLS) and Backpack Laser Scanning (BLS)) data.

Individual tree biomass estimation using terrestrial laser scanning

2013 ◽  
Vol 75 ◽  
pp. 64-75 ◽  
Author(s):  
Ville Kankare ◽  
Markus Holopainen ◽  
Mikko Vastaranta ◽  
Eetu Puttonen ◽  
Xiaowei Yu ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Biomass Estimation ◽  
Tree Biomass ◽  
Individual Tree

scholarly journals Spatial Models With Inter-Tree Competition From Airborne Laser Scanning Improve Estimates of Genetic Variance

2021 ◽  
Vol 11 ◽  
Author(s):  
David Pont ◽  
Heidi S. Dungey ◽  
Mari Suontama ◽  
Grahame T. Stovold
Keyword(s):  
Laser Scanning ◽  
Management Practices ◽  
Spatial Models ◽  
Airborne Laser Scanning ◽  
Tree Level ◽  
Residual Variance ◽  
Spatial Effects ◽  
Individual Tree ◽  
Airborne Laser ◽  
Individual Trees

Phenotyping individual trees to quantify interactions among genotype, environment, and management practices is critical to the development of precision forestry and to maximize the opportunity of improved tree breeds. In this study we utilized airborne laser scanning (ALS) data to detect and characterize individual trees in order to generate tree-level phenotypes and tree-to-tree competition metrics. To examine our ability to account for environmental variation and its relative importance on individual-tree traits, we investigated the use of spatial models using ALS-derived competition metrics and conventional autoregressive spatial techniques. Models utilizing competition covariate terms were found to quantify previously unexplained phenotypic variation compared with standard models, substantially reducing residual variance and improving estimates of heritabilities for a set of operationally relevant traits. Models including terms for spatial autocorrelation and competition performed the best and were labelled ACE (autocorrelation-competition-error) models. The best ACE models provided statistically significant reductions in residuals ranging from −65.48% for tree height (H) to −21.03% for wood stiffness (A), and improvements in narrow sense heritabilities from 38.64% for H to 14.01% for A. Individual tree phenotyping using an ACE approach is therefore recommended for analyses of research trials where traits are susceptible to spatial effects.

scholarly journals Individual Tree Position Extraction and Structural Parameter Retrieval Based on Airborne LiDAR Data: Performance Evaluation and Comparison of Four Algorithms

2020 ◽  
Vol 12 (3) ◽  
pp. 571 ◽  
Author(s):  
Chen ◽  
Xiang ◽  
Moriya
Keyword(s):  
Template Matching ◽  
Local Maximum ◽  
Airborne Lidar ◽  
Forest Monitoring ◽  
Lidar Data ◽  
Individual Tree ◽  
Matching Algorithm ◽  
Crown Width ◽  
Individual Trees ◽  
Airborne Lidar Data

Information for individual trees (e.g., position, treetop, height, crown width, and crown edge) is beneficial for forest monitoring and management. Light Detection and Ranging (LiDAR) data have been widely used to retrieve these individual tree parameters from different algorithms, with varying successes. In this study, we used an iterative Triangulated Irregular Network (TIN) algorithm to separate ground and canopy points in airborne LiDAR data, and generated Digital Elevation Models (DEM) by Inverse Distance Weighted (IDW) interpolation, thin spline interpolation, and trend surface interpolation, as well as by using the Kriging algorithm. The height of the point cloud was assigned to a Digital Surface Model (DSM), and a Canopy Height Model (CHM) was acquired. Then, four algorithms (point-cloud-based local maximum algorithm, CHM-based local maximum algorithm, watershed algorithm, and template-matching algorithm) were comparatively used to extract the structural parameters of individual trees. The results indicated that the two local maximum algorithms can effectively detect the treetop; the watershed algorithm can accurately extract individual tree height and determine the tree crown edge; and the template-matching algorithm works well to extract accurate crown width. This study provides a reference for the selection of algorithms in individual tree parameter inversion based on airborne LiDAR data and is of great significance for LiDAR-based forest monitoring and management.

Crown structure of European beech (Fagus sylvatica L.): a non-causal proxy for mechanical–physical wood properties

2020 ◽  
Author(s):  
Andreas Rais ◽  
Martin Jacobs ◽  
Jan-Willem G. van de Kuilen ◽  
Hans Pretzsch
Keyword(s):  
Fagus Sylvatica ◽  
Laser Scanning ◽  
European Beech ◽  
Wood Properties ◽  
Projection Area ◽  
Mixed Stands ◽  
Crown Volume ◽  
Crown Structure ◽  
Crown Morphology ◽  
Crown Projection Area

The current tendency towards the silvicultural promotion of mixed tree species has increased the variability in the crown structure within stands. This study shows how neighbouring trees can influence both the external crown features and internal wood properties of trees. Using terrestrial laser scanning, the crown features of 100 European beech trees, <i>Fagus sylvatica</i> L., from pure beech stands and mixed stands of beech with Douglas fir, Norway spruce, sessile oak and Scots pine were recorded. After felling and sawing, the dynamic modulus of elasticity was determined on 1623 boards from the two lower 4.1-m logs. Significant differences were found between beech trees from pure stands and those from beech–pine mixed stands in terms of crown volume (415 m<sup>3</sup> vs 766 m<sup>3</sup>), crown ratio (50.0% vs 71.5%), crown projection ratio (0.182 m cm<sup>−1</sup> vs 0.253 m cm<sup>−1</sup>) and branch angle (30.7° vs 54.1°). Multiple regression mixed models revealed significant relationships between timber stiffness and crown volume (-1.7 N mm<sup>−2</sup> m<sup>−3</sup>), crown ratio (-28.4 N mm<sup>−2</sup> %<sup>−1</sup>) and crown projection area (-9835 N mm<sup>−2</sup> m<sup>−1</sup> cm). Thus, the crown morphology of broad-leaved species reflects the tree’s long-term competitive status and suggests indicators for the assessment of mechanical–physical wood properties.

Influence of ULS data acquisition characteristics on the achievable stem reconstruction accuracies

2020 ◽  
Author(s):  
Moritz Bruggisser ◽  
Johannes Otepka ◽  
Norbert Pfeifer ◽  
Markus Hollaus
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Point Clouds ◽  
Stem Diameter ◽  
Forest Monitoring ◽  
Individual Tree ◽  
Detection Rates ◽  
Point Count ◽  
Tree Stem

&lt;p&gt;Unmanned aerial vehicles-borne laser scanning (ULS) allows time-efficient acquisition of high-resolution point clouds on regional extents at moderate costs. The quality of ULS-point clouds facilitates the 3D modelling of individual tree stems, what opens new possibilities in the context of forest monitoring and management. In our study, we developed and tested an algorithm which allows for i) the autonomous detection of potential stem locations within the point clouds, ii) the estimation of the diameter at breast height (DBH) and iii) the reconstruction of the tree stem. In our experiments on point clouds from both, a RIEGL miniVUX-1DL and a VUX-1UAV, respectively, we could detect 91.0 % and 77.6 % of the stems within our study area automatically. The DBH could be modelled with biases of 3.1 cm and 1.1 cm, respectively, from the two point cloud sets with respective detection rates of 80.6 % and 61.2 % of the trees present in the field inventory. The lowest 12 m of the tree stem could be reconstructed with absolute stem diameter differences below 5 cm and 2 cm, respectively, compared to stem diameters from a point cloud from terrestrial laser scanning. The accuracy of larger tree stems thereby was higher in general than the accuracy for smaller trees. Furthermore, we recognized a small influence only of the completeness with which a stem is covered with points, as long as half of the stem circumference was captured. Likewise, the absolute point count did not impact the accuracy, but, in contrast, was critical to the completeness with which a scene could be reconstructed. The precision of the laser scanner, on the other hand, was a key factor for the accuracy of the stem diameter estimation.&amp;#160;&lt;br&gt;The findings of this study are highly relevant for the flight planning and the sensor selection of future ULS acquisition missions in the context of forest inventories.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document