scholarly journals LEO-Constellation-Augmented BDS Precise Orbit Determination Considering Spaceborne Observational Errors

2021 ◽  
Vol 13 (16) ◽  
pp. 3189
Author(s):  
Min Li ◽  
Tianhe Xu ◽  
Haibo Ge ◽  
Meiqian Guan ◽  
Honglei Yang ◽  
...  
Keyword(s):  
Orbit Determination ◽  
Precise Orbit Determination ◽  
Satellite System ◽  
Satellite Orbits ◽  
Navigation Satellite ◽  
Noise Levels ◽  
Precise Orbit ◽  
Leo Satellites ◽  
Solar Storm ◽  
Observational Errors

The precise orbit determination (POD) accuracy of the Chinese BeiDou Navigation Satellite System (BDS) is still not comparable to that of the Global Positioning System because of the unfavorable geometry of the BDS and the uneven distribution of BDS ground monitoring stations. Fortunately, low Earth orbit (LEO) satellites, serving as fast moving stations, can efficiently improve BDS geometry. Nearly all studies on Global Navigation Satellite System POD enhancement using large LEO constellations are based on simulations and their results are usually overly optimistic. The receivers mounted on a spacecraft or an LEO satellite are usually different from geodetic receivers and the observation conditions in space are more challenging than those on the ground. The noise level of spaceborne observations needs to be carefully calibrated. Moreover, spaceborne observational errors caused by space weather events, i.e., solar geomagnetic storms, are usually ignored. Accordingly, in this study, the actual spaceborne observation noises are first analyzed and then used in subsequent observation simulations. Then, the observation residuals from the actual-processed LEO POD during a solar storm on 8 September 2017 are extracted and added to the simulated spaceborne observations. The effect of the observational errors on the BDS POD augmented with different LEO constellation configurations is analyzed. The results indicate that the noise levels from the Swarm-A, GRACE-A, and Sentinel-3A satellites are different and that the carrier-phase measurement noise ranges from 2 mm to 6 mm. Such different noise levels for LEO spaceborne observations cause considerable differences in the BDS POD solutions. Experiments calculating the augmented BDS POD for different LEO constellations considering spaceborne observational errors extracted from the solar storm indicate that these errors have a significant influence on the accuracy of the BDS POD. The 3D root mean squares of the BDS GEO, IGSO, and MEO satellite orbits are 1.30 m, 1.16 m, and 1.02 m, respectively, with a Walker 2/1/0 LEO constellation, and increase to 1.57 m, 1.72 m, and 1.32 m, respectively, with a Walker 12/3/1 constellation. When the number of LEO satellites increases to 60, the precision of the BDS POD improves significantly to 0.89 m, 0.77 m, and 0.69 m for the GEO, IGSO, and MEO satellites, respectively. While 12 satellites are sufficient to enhance the BDS POD to the sub-decimeter level, up to 60 satellites can effectively reduce the influence of large spaceborne observational errors, i.e., from solar storms.

scholarly journals Precise Orbit Determination for GNSS Maneuvering Satellite with the Constraint of a Predicted Clock

2019 ◽  
Vol 11 (16) ◽  
pp. 1949 ◽  
Author(s):  
Xiaolei Dai ◽  
Yidong Lou ◽  
Zhiqiang Dai ◽  
Caibo Hu ◽  
Yaquan Peng ◽  
...  
Keyword(s):  
Orbit Determination ◽  
Precise Orbit Determination ◽  
Satellite System ◽  
Navigation Satellite ◽  
Precise Orbit ◽  
Gps Satellites ◽  
Global Navigation Satellite ◽  
Cross Track ◽  
Along Track ◽  
Backward Integration

Precise orbit products are essential and a prerequisite for global navigation satellite system (GNSS) applications, which, however, are unavailable or unusable when satellites are undertaking maneuvers. We propose a clock-constrained reverse precise point positioning (RPPP) method to generate the rather precise orbits for GNSS maneuvering satellites. In this method, the precise clock estimates generated by the dynamic precise orbit determination (POD) processing before maneuvering are modeled and predicted to the maneuvering periods and they constrain the RPPP POD during maneuvering. The prediction model is developed according to different clock types, of which the 2-h prediction error is 0.31 ns and 1.07 ns for global positioning system (GPS) Rubidium (Rb) and Cesium (Cs) clocks, and 0.45 ns and 0.60 ns for the Beidou navigation satellite system (BDS) geostationary orbit (GEO) and inclined geosynchronous orbit (IGSO)/Median Earth orbit (MEO) satellite clocks, respectively. The performance of this proposed method is first evaluated using the normal observations without maneuvers. Experiment results show that, without clock-constraint, the average root mean square (RMS) of RPPP orbit solutions in the radial, cross-track and along-track directions is 69.3 cm, 5.4 cm and 5.7 cm for GPS satellites and 153.9 cm, 12.8 cm and 10.0 cm for BDS satellites. When the constraint of predicted satellite clocks is introduced, the average RMS is dramatically reduced in the radial direction by a factor of 7–11, with the value of 9.7 cm and 13.4 cm for GPS and BDS satellites. At last, the proposed method is further tested on the actual GPS and BDS maneuver events. The clock-constrained RPPP POD solution is compared to the forward and backward integration orbits of the dynamic POD solution. The resulting orbit differences are less than 20 cm in all three directions for GPS satellite, and less than 30 cm in the radial and cross-track directions and up to 100 cm in the along-track direction for BDS satellites. From the orbit differences, the maneuver start and end time is detected, which reveals that the maneuver duration of GPS satellites is less than 2 min, and the maneuver events last from 22.5 min to 107 min for different BDS satellites.

scholarly journals Experimental Study on the Precise Orbit Determination of the BeiDou Navigation Satellite System

Sensors ◽  
2013 ◽  
Vol 13 (3) ◽  
pp. 2911-2928 ◽  
Author(s):  
Lina He ◽  
Maorong Ge ◽  
Jiexian Wang ◽  
Jens Wickert ◽  
Harald Schuh
Keyword(s):  
Experimental Study ◽  
Orbit Determination ◽  
Precise Orbit Determination ◽  
Satellite System ◽  
Navigation Satellite ◽  
Beidou Navigation Satellite System ◽  
Precise Orbit

scholarly journals Precise Orbit Determination for BeiDou GEO/IGSO Satellites during Orbit Maneuvering with Pseudo-Stochastic Pulses

2019 ◽  
Vol 11 (21) ◽  
pp. 2587
Author(s):  
Qin ◽  
Huang ◽  
Zhang ◽  
Wang ◽  
Yan ◽  
...  
Keyword(s):  
Orbit Determination ◽  
Precise Orbit Determination ◽  
Satellite System ◽  
Assessment System ◽  
Asia Pacific ◽  
Earth Orbit ◽  
Observation Data ◽  
Navigation Satellite ◽  
Precise Orbit ◽  
Global Navigation Satellite

In order to provide better service for the Asia-Pacific region, the BeiDou navigation satellite system (BDS) is designed as a constellation containing medium earth orbit (MEO), geostationary earth orbit (GEO), and inclined geosynchronous orbit (IGSO). However, the multi-orbit configuration brings great challenges for orbit determination. When orbit maneuvering, the orbital elements of the maneuvered satellites from broadcast ephemeris are unusable for several hours, which makes it difficult to estimate the initial orbit in the process of precise orbit determination. In addition, the maneuvered force information is unknown, which brings systematic orbit integral errors. In order to avoid these errors, observation data are removed from the iterative adjustment. For the above reasons, the precise orbit products of maneuvered satellites are missing from IGS (international GNSS (Global Navigation Satellite System) service) and iGMAS (international GNSS monitoring and assessment system). This study proposes a method to determine the precise orbits of maneuvered satellites for BeiDou GEO and IGSO. The initial orbits of maneuvered satellites could be backward forecasted according to the precise orbit products. The systematic errors caused by unmodeled maneuvered force are absorbed by estimated pseudo-stochastic pulses. The proposed method for determining the precise orbits of maneuvered satellites is validated by analyzing data of stations from the Multi-GNSS Experiment (MGEX). The results show that the precise orbits of maneuvered satellites can be estimated correctly when orbit maneuvering, which could supplement the precise products from the analysis centers of IGS and iGMAS. It can significantly improve the integrality and continuity of the precise products and subsequently provide better precise products for users.

Combined Precise Orbit Determination for BDS-2 and BDS-3 Satellites

2020 ◽  
Author(s):  
Hanbing Peng ◽  
Maorong Ge ◽  
Yuanxi Yang ◽  
Harald Schuh ◽  
Roman Galas
Keyword(s):  
Orbit Determination ◽  
Precise Orbit Determination ◽  
Satellite System ◽  
Asia Pacific ◽  
Navigation Satellite ◽  
Beidou Navigation Satellite System ◽  
Precise Orbit ◽  
Product Generation ◽  
Open Service ◽  
The Impact

<p>Since November 2017, the 3rd generation BeiDou Navigation Satellite System (BDS-3) of China has stepped into an intensive build-up phase. Up to the end of 2019, there are 5 experimental and 28 operational BDS-3 satellites in the space. Besides that, 16 BDS-2 legacy satellites are still providing Positioning, Navigation and Timing (PNT) service for Asia-Pacific users. Unlike BDS-2 satellites, BDS-3 satellites will not transmit signal on frequency B2I which is one of the open service frequencies of BDS-2 and will be replaced by B2a of BDS-3. For legacy signals, only that on B1I and B3I will be transmitted by all BDS-3 satellites. Therefore, current routine scheme that generates precise orbit and clock products with B1I+B2I combination observations becomes infeasible for BDS-3. Observation combination used for product generation of BDS-2 could be switched to B1I+B3I combination as well. However, this might cause discontinuity in BDS-2 products as different hardware delays specific to signals are contained in them. In this study, combined processing of BDS-2 and BDS-3 satellites to generate consistent precise orbit and clock products is researched. To elaborate the impact of observation biases between BDS-2 and BDS-3, different combined Precise Orbit Determination (POD) processing schemes are examined. It shows that receiver biases between BDS-2 and BDS-3 should be considered in combined POD which is clear from the post-fit residuals of observations, especially from that of BDS-3 code observations. After estimating those biases between B1I+B2I of BDS-2 and B1I+B3I of BDS-3, Root-Mean-Square (RMS) of BDS-3 code observations decreases from 5.07 to 1.23 m. The results show that, biases of B1I+B3I between BDS-2 and BDS-3 are relatively small, less than 4 m for most receivers and around 1.2 m on average. But their estimates are stable with standard deviations (STDs) of 0.13 ~ 0.34 m depending on receiver types. Influences of these biases on the POD results are limited. However, biases between B1I+B2I of BDS-2 and B1I+B3I of BDS-3 are more significant, from -10 to 30 m for different receivers. Except for Septentrio receivers, quantities of those biases are basically related to the receiver types. Averages of biases from Trimble, JAVAD and Leica receivers are 18.5, 5.0 and 10.0 m, respectively. Those biases are also estimated with very small STDs, which ranges from 0.13 to 0.28 m. It is demonstrated that those receiver biases should be properly handle in combined POD processing of BDS-2 and BDS-3 satellites. As B1I+B2I is more appropriate for BDS-2, using different observation combinations for BDS-2 and BDS-3 in combined POD processing is more preferred over the scheme in which B1I+B3I is used for both BDS-2 and BDS-3.</p>

scholarly journals General relativistic effects acting on the orbits of Galileo satellites

2021 ◽  
Vol 133 (4) ◽  
Author(s):  
K. Sośnica ◽  
G. Bury ◽  
R. Zajdel ◽  
K. Kazmierski ◽  
J. Ventura-Traveset ◽  
...  
Keyword(s):  
General Relativity ◽  
Orbit Determination ◽  
Final Height ◽  
Precise Orbit Determination ◽  
Satellite System ◽  
De Sitter ◽  
Circular Orbits ◽  
Precise Orbit ◽  
Artificial Earth Satellites ◽  
Artificial Earth

AbstractThe first pair of satellites belonging to the European Global Navigation Satellite System (GNSS)—Galileo—has been accidentally launched into highly eccentric, instead of circular, orbits. The final height of these two satellites varies between 17,180 and 26,020 km, making these satellites very suitable for the verification of the effects emerging from general relativity. We employ the post-Newtonian parameterization (PPN) for describing the perturbations acting on Keplerian orbit parameters of artificial Earth satellites caused by the Schwarzschild, Lense–Thirring, and de Sitter general relativity effects. The values emerging from PPN numerical simulations are compared with the approximations based on the Gaussian perturbations for the temporal variations of the Keplerian elements of Galileo satellites in nominal, near-circular orbits, as well as in the highly elliptical orbits. We discuss what kinds of perturbations are detectable using the current accuracy of precise orbit determination of artificial Earth satellites, including the expected secular and periodic variations, as well as the constant offsets of Keplerian parameters. We found that not only secular but also periodic variations of orbit parameters caused by general relativity effects exceed the value of 1 cm within 24 h; thus, they should be fully detectable using the current GNSS precise orbit determination methods. Many of the 1-PPN effects are detectable using the Galileo satellite system, but the Lense–Thirring effect is not.

scholarly journals Real-Time Kinematic Precise Orbit Determination for LEO Satellites Using Zero-Differenced Ambiguity Resolution

2019 ◽  
Vol 11 (23) ◽  
pp. 2815 ◽  
Author(s):  
Xingxing Li ◽  
Jiaqi Wu ◽  
Keke Zhang ◽  
Xin Li ◽  
Yun Xiong ◽  
...  
Keyword(s):  
Real Time ◽  
Ambiguity Resolution ◽  
Orbit Determination ◽  
Precise Orbit Determination ◽  
The Real ◽  
Precise Orbit ◽  
Ambiguity Fixing ◽  
Real Time Kinematic ◽  
Leo Satellites ◽  
Fixed Solution

The rapid growing number of earth observation missions and commercial low-earth-orbit (LEO) constellation plans have provided a strong motivation to get accurate LEO satellite position and velocity information in real time. This paper is devoted to improve the real-time kinematic LEO orbits through fixing the zero-differenced (ZD) ambiguities of onboard Global Navigation Satellite System (GNSS) phase observations. In the proposed method, the real-time uncalibrated phase delays (UPDs) are estimated epoch-by-epoch via a global-distributed network to support the ZD ambiguity resolution (AR) for LEO satellites. By separating the UPDs, the ambiguities of onboard ZD GPS phase measurements recover their integer nature. Then, wide-lane (WL) and narrow-lane (NL) AR are performed epoch-by-epoch and the real-time ambiguity–fixed orbits are thus obtained. To validate the proposed method, a real-time kinematic precise orbit determination (POD), for both Sentinel-3A and Swarm-A satellites, was carried out with ambiguity–fixed and ambiguity–float solutions, respectively. The ambiguity fixing results indicate that, for both Sentinel-3A and Swarm-A, over 90% ZD ambiguities could be properly fixed with the time to first fix (TTFF) around 25–30 min. For the assessment of LEO orbits, the differences with post-processed reduced dynamic orbits and satellite laser ranging (SLR) residuals are investigated. Compared with the ambiguity–float solution, the 3D orbit difference root mean square (RMS) values reduce from 7.15 to 5.23 cm for Sentinel-3A, and from 5.29 to 4.01 cm for Swarm-A with the help of ZD AR. The SLR residuals also show notable improvements for an ambiguity–fixed solution; the standard deviation values of Sentinel-3A and Swarm-A are 4.01 and 2.78 cm, with improvements of over 20% compared with the ambiguity–float solution. In addition, the phase residuals of ambiguity–fixed solution are 0.5–1.0 mm larger than those of the ambiguity–float solution; the possible reason is that the ambiguity fixing separate integer ambiguities from unmodeled errors used to be absorbed in float ambiguities.

scholarly journals Integrated Precise Orbit Determination of Multi-GNSS and Large LEO Constellations

2019 ◽  
Vol 11 (21) ◽  
pp. 2514 ◽  
Author(s):  
Xingxing Li ◽  
Keke Zhang ◽  
Fujian Ma ◽  
Wei Zhang ◽  
Qian Zhang ◽  
...  
Keyword(s):  
Orbit Determination ◽  
Precise Orbit Determination ◽  
Global Network ◽  
Computational Time ◽  
Observation Data ◽  
Accuracy Improvement ◽  
Precise Orbit ◽  
Leo Satellites ◽  
Geo Satellites ◽  
Gnss Observations

Global navigation satellite system (GNSS) orbits are traditionally determined by observation data of ground stations, which usually need even global distribution to ensure adequate observation geometry strength. However, good tracking geometry cannot be achieved for all GNSS satellites due to many factors, such as limited ground stations and special stationary characteristics for the geostationary Earth orbit (GEO) satellites in the BeiDou constellation. Fortunately, the onboard observations from low earth orbiters (LEO) can be an important supplement to overcome the weakness in tracking geometry. In this contribution, we perform large LEO constellation-augmented multi-GNSS precise orbit determination (POD) based on simulated GNSS observations. Six LEO constellations with different satellites numbers, orbit types, and altitudes, as well as global and regional ground networks, are designed to assess the influence of different tracking configurations on the integrated POD. Then, onboard and ground-based GNSS observations are simulated, without regard to the observations between LEO satellites and ground stations. The results show that compared with ground-based POD, a remarkable accuracy improvement of over 70% can be observed for all GNSS satellites when the entire LEO constellation is introduced. Particularly, BDS GEO satellites can obtain centimeter-level orbits, with the largest accuracy improvement being 98%. Compared with the 60-LEO and 66-LEO schemes, the 96-LEO scheme yields an improvement in orbit accuracy of about 1 cm for GEO satellites and 1 mm for other satellites because of the increase of LEO satellites, but leading to a steep rise in the computational time. In terms of the orbital types, the sun-synchronous-orbiting constellation can yield a better tracking geometry for GNSS satellites and a stronger augmentation than the polar-orbiting constellation. As for the LEO altitude, there are almost no large-orbit accuracy differences among the 600, 1000, and 1400 km schemes except for BDS GEO satellites. Furthermore, the GNSS orbit is found to have less dependence on ground stations when incorporating a large number of LEO. The orbit accuracy of the integrated POD with 8 global stations is almost comparable to the result of integrated POD with a denser global network of 65 stations. In addition, we also present an analysis concerning the integrated POD with a partial LEO constellation. The result demonstrates that introducing part of a LEO constellation can be an effective way to balance the conflict between the orbit accuracy and computational efficiency.

Sign in / Sign up

Export Citation Format

Share Document