geo satellites
Recently Published Documents


TOTAL DOCUMENTS

158
(FIVE YEARS 51)

H-INDEX

9
(FIVE YEARS 4)

2022 ◽  
Author(s):  
Dale C. Ferguson ◽  
Ernest Holeman
Keyword(s):  

2021 ◽  
Vol 13 (24) ◽  
pp. 5011
Author(s):  
Hao Yang ◽  
Shengyue Ji ◽  
Duojie Weng ◽  
Zhenjie Wang ◽  
Kaifei He ◽  
...  

Traditional coseismic displacement retrieval generally uses real-time kinematic (RTK) and precise point positioning (PPP) services. However, both RTK and real-time PPP need a network link to transmit the corrected data. Although the network link may be interrupted when an earthquake happens, the PPP-B2b service broadcasted by geostationary orbit (GEO) satellites will not be affected. Its service range mainly covers China and the surrounding areas. In this research, the PPP method with PPP-B2b service based on constrained coordinates is proposed and overcomes the limitation of the network link and long convergence time. First, the accuracy of orbits and clock offsets for the PPP-B2b service is evaluated and compared with real-time service (RTS). Then, the simulated experiments are carried out using the PPP method with PPP-B2b service based on constrained coordinates, which tests the accuracy by calculating the coordinate displacement of the measurement station. The results show that the accuracy of PPP-B2b orbits in the radial direction is within 0.1 m. Moreover, regarding the accuracy of clock offsets, the PPP-B2b service is no more than 3.5 cm. This validates the feasibility of replacing RTS products with PPP-B2b. In the 15 min simulated experiments, the root mean square (RMS) of horizontal and vertical directions is maintained within 3 cm.


2021 ◽  
Vol 13 (24) ◽  
pp. 4993
Author(s):  
Jonghyuk Lee ◽  
Dong-Bin Shin

Stereoscopic cloud-top height (CTH) retrieval from two geostationary (GEO) satellites is usually realized through a visible (VIS) band with a high horizontal resolution. A stereoscopic-based CTH retrieval algorithm (prototype dual-GEO CTH algorithm) proposed in our previous study also adopts this approach. Although this approach can retrieve accurate stereoscopic CTHs, the heights of optically thin upper clouds overlying the lower clouds are challenging to retrieve because the parallax difference between two GEOs is determined by the lower clouds owing to the low reflectance from the upper clouds. To address this problem, this paper proposes an improved stereoscopic CTH retrieval algorithm, named the improved dual-GEO CTH algorithm, for Himawari-8 and FengYun (FY)-4A GEOs. The proposed algorithm employs an infrared (IR) band in addition to a VIS band. A seamless image cloning technique is adopted to blend the VIS and IR images, which are then used to retrieve the stereoscopic CTHs. The retrieved CTHs are compared with the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Cloud Profiling Radar (CPR) CTHs for three occasions involving upper clouds overlying lower clouds. Results show that the proposed algorithm outperforms the prototype dual-GEO CTH algorithm in the case of upper clouds overlying lower clouds. Notably, although the proposed algorithm is intended for Himawari-8 and FY-4A GEOs, it can be easily extended to any combination of two GEOs.


2021 ◽  
Vol 13 (21) ◽  
pp. 4487
Author(s):  
Bin Yi ◽  
Defeng Gu ◽  
Kai Shao ◽  
Bing Ju ◽  
Houzhe Zhang ◽  
...  

TH-2 is China’s first short-range satellite formation system used to realize interferometric synthetic aperture radar (InSAR) technology. In order to achieve the mission goal of InSAR processing, the relative orbit must be determined with high accuracy. In this study, the precise relative orbit determination (PROD) for TH-2 based on global positioning system (GPS), second-generation BeiDou navagation satellite system (BDS2), and GPS + BDS2 observations was performed. First, the performance of onboard GPS and BDS2 measurements were assessed by analyzing the available data, code multipath errors and noise levels of carrier phase observations. The differences between the National University of Defense Technology (NDT) and the Xi’an Research Institute of Surveying and Mapping (CHS) baseline solutions exhibited an RMS of 1.48 mm outside maneuver periods. The GPS-based orbit was used as a reference orbit to evaluate the BDS2-based orbit and the GPS + BDS2-based orbit. It is the first time BDS2 has been applied to the PROD of low Earth orbit (LEO) satellite formation. The results showed that the root mean square (RMS) of difference between the PROD results using GPS and BDS2 measurements in 3D components was 2.89 mm in the Asia-Pacific region. We assigned different weights to geostationary Earth orbit (GEO) satellites to illustrate the impact of GEO satellites on PROD, and the accuracy of PROD was improved to 7.08 mm with the GEO weighting strategy. Finally, relative orbits were derived from the combined GPS and BDS2 data. When BDS2 was added on the basis of GPS, the average number of visible navigation satellites from TH-2A and TH-2B improved from 7.5 to 9.5. The RMS of the difference between the GPS + BDS2-based orbit and the GPS-based orbit was about 1.2 mm in 3D. The overlap comparison results showed that the combined orbit consistencies were below 1 mm in the radial (R), along-track (T), and cross-track (N) directions. Furthermore, when BDS2 co-worked with GPS, the average of the ambiguity dilution of precision (ADOP) reduced from 0.160 cycle to 0.153 cycle, which was about a 4.4% reduction. The experimental results indicate that millimeter-level PROD results for TH-2 satellite formation can be obtained by using onboard GPS and BDS2 observations, and multi-GNSS can further improve the accuracy and reliability of PROD.


2021 ◽  
Vol 13 (16) ◽  
pp. 3285
Author(s):  
Yongqian Chen ◽  
Songhua Yan ◽  
Jianya Gong

Deformation monitoring has been brought to the fore and extensively studied in recent years. Global Navigation Satellite System Reflectometry (GNSS-R) techniques have so far been developed in deformation estimation applications, which however, are subject to the influence of mobile satellites. Rather than compensating for the path delay variations caused by mobile satellites, adopting Beidou geostationary Earth orbit (GEO) satellites as transmitters directly eliminates the satellite-motion-induced phase error and thus provides access to stable phase information. This paper presents a novel deformation monitoring concept based on GNSS-R utilizing Beidou GEO satellites. The geometrical properties of the GEO-based bistatic GNSS radar system are explored to build a theoretical connection between deformation quantity and the echo carrier phases. A deformation retrieval algorithm is proposed based on the supporting software receiver, thus allowing echo carrier phases to be extracted and utilized in deformation retrieval. Two field validation experiments are conducted by constructing passive bistatic radars with reflecting plates and ground receiver. Utilizing the proposed algorithm, the experimental results suggested that the GEO-based GNSS reflectometry can achieve deformation estimations with an accuracy of around 1 cm when the extracted phases does not exceed one complete cycle, while better than 3 cm when considering the correct integer number of phase cycles. Consequently, based on the passive bistatic radar system, the potential of achieving continuous, low-cost deformation monitoring makes this novel technique noteworthy.


2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Ying Chen ◽  
Weiguang Gao ◽  
Xiao Chen ◽  
Ting Liu ◽  
Cheng Liu ◽  
...  

AbstractSatellite Based Augmentation System (SBAS) provides the corrections and integrity information to users, but as its signal format is opened to the public and Global Navigation Satellite System (GNSS) spoofing technology becomes more realistic, more feasible and cheaper. It's foreseeable that there will be risks of spoofing threats against SBAS in the future. SBAS signal authentication technology provides a system-level solution to spoofing threats by adding special markers to SBAS signals so that receivers can verify whether the SBAS signals are from the on-orbit Geostationary Earth Orbit (GEO) satellites or whether the signal information has been forged and tampered with. First, this article introduces the existing anti-spoofing methods that can be applied to SBAS, especially the Elliptic Curve Digital Signature Algorithm (ECDSA) and Timed Efficient Stream Loss-Tolerant Authentication (TESLA) protocols. Then it discusses four possible solutions in a combination with the existing SBAS Interface Control Document (ICD). Two main Key Performance Indicators (KPIs), Time Between Authentication (TBA) and Authentication Latency (AL), obtained in the four main scenarios are compared. By analyzing the EGNOS Authentication Security Testbed (EAST) test simulation results of European Geostationary Navigation Overlay Service (EGNOS) in Europe, the impact of SBAS after joining the authentication service is obtained.


2021 ◽  
Author(s):  
Bo Chen ◽  
Daqi Liu ◽  
Tat-Jun Chin ◽  
Mark Rutten ◽  
Dawa Derksenv ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document