scholarly journals Semiconductor Gas Sensors: Materials, Technology, Design, and Application

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6694
Author(s):  
Maria Vesna Nikolic ◽  
Vladimir Milovanovic ◽  
Zorka Z. Vasiljevic ◽  
Zoran Stamenkovic
Keyword(s):  
Carbon Nanotubes ◽  
Transition Metal ◽  
Conducting Polymers ◽  
Metal Oxides ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Operating Temperature ◽  
2D Materials ◽  
Semiconductor Materials ◽  
Technology Design

This paper presents an overview of semiconductor materials used in gas sensors, their technology, design, and application. Semiconductor materials include metal oxides, conducting polymers, carbon nanotubes, and 2D materials. Metal oxides are most often the first choice due to their ease of fabrication, low cost, high sensitivity, and stability. Some of their disadvantages are low selectivity and high operating temperature. Conducting polymers have the advantage of a low operating temperature and can detect many organic vapors. They are flexible but affected by humidity. Carbon nanotubes are chemically and mechanically stable and are sensitive towards NO and NH3, but need dopants or modifications to sense other gases. Graphene, transition metal chalcogenides, boron nitride, transition metal carbides/nitrides, metal organic frameworks, and metal oxide nanosheets as 2D materials represent gas-sensing materials of the future, especially in medical devices, such as breath sensing. This overview covers the most used semiconducting materials in gas sensing, their synthesis methods and morphology, especially oxide nanostructures, heterostructures, and 2D materials, as well as sensor technology and design, application in advance electronic circuits and systems, and research challenges from the perspective of emerging technologies.

Insights into g-C3N4 as chemi-resistive gas sensors towards VOCs and humidity- A review on state-of-the-art and recent advancements

2021 ◽  
Author(s):  
Parthasarathy Srinivasan ◽  
Soumadri Samanta ◽  
Akshay Krishnakumar ◽  
John Bosco Balaguru Rayappan ◽  
Kamalakannan Kailasam
Keyword(s):  
Carbon Nanotubes ◽  
Conducting Polymers ◽  
Metal Oxides ◽  
Gas Sensors ◽  
State Of The Art ◽  
2D Materials ◽  
The Past ◽  
Sensing Applications ◽  
Resistive Gas Sensors

Over the past decades, many materials like metal oxides, conducting polymers, carbon nanotubes, 2D materials, graphene, zeolites and porous organic frameworks (MOFs and COFs) have been explored for chemo-sensing applications...

MULTIWALLED CARBON NANOTUBES BASED NANOCOMPOSITES FOR SUPERCAPACITORS: A REVIEW OF ELECTRODE MATERIALS

NANO ◽  
2012 ◽  
Vol 07 (02) ◽  
pp. 1230002 ◽  
Author(s):  
MEISAM VALIZADEH KIAMAHALLEH ◽  
SHARIF HUSSEIN SHARIF ZEIN ◽  
GHASEM NAJAFPOUR ◽  
SUHAIRI ABD SATA ◽  
SURANI BUNIRAN
Keyword(s):  
Carbon Nanotubes ◽  
Transition Metal ◽  
Conducting Polymers ◽  
Metal Oxides ◽  
Multiwalled Carbon Nanotubes ◽  
Transition Metal Oxides ◽  
Electrode Materials ◽  
Mass Density ◽  
High Mass ◽  
Multiwalled Carbon

Electrode materials are the most important factors to verify the properties of the electrochemical supercapacitor. In this paper, the storage principles and characteristics of electrode materials, including carbon-based materials, transition metal oxides and conducting polymers for supercapacitors are depicted in detail. Other factors such as electrode separator and electrolyte are briefly investigated. Recently, several works are conducted on application of multiwalled carbon nanotubes (MWCNTs) and MWCNTs-based electrode materials for supercapacitors. MWCNTs serve in experimental supercapacitor electrode materials result in specific capacitance (SC) value as high as 135 Fg-1. Addition of pseudocapacitive materials such as transition metal oxides and conducting polymers in the MWCNTs results in electrochemical performance improvement (higher capacitance and conductivity). The nanocomposites of MWCNTs and pseudocapacitive materials are the most promising electrode materials for supercapacitors because of their good electrical conductivity, low cost and high mass density.

Synthesis and Harmful Gas Sensing Properties of Zinc Oxide Modified Multi-Walled Carbon Nanotubes Composites

2014 ◽  
Vol 1044-1045 ◽  
pp. 172-175 ◽  
Author(s):  
Muhammad Iqbal ◽  
Embun Marintan ◽  
Ni Luh Wulan Septiani ◽  
Suyatman ◽  
Ahmad Nuruddin ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Zinc Oxide ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Performance Testing ◽  
Sensitive Layer ◽  
Multi Walled Carbon Nanotubes ◽  
Operating Temperatures ◽  
Lower Operating Temperature

Metal oxide semiconductors materials such as zinc oxide (ZnO) are often used in the fabrication of chemoresistive gas sensors, but ZnO materials require high operating temperatures to operate. In another side, carbon nanotubes (CNT) have many distinct properties and recently have been exploited as the next generation of sensors, including chemoresisitive type gas sensors. This study was aimed to investigate the performance of MWNT-ZnO composites as SO2 gas sensitive layer. By fabricate composites of MWNT and ZnO, have been obtained a sensitive layer that can be utilized for application as gas sensitive layer with relatively lower operating temperature. A sensitive layer of MWNT-ZnO based composites have been successfully fabricated on a alumina substrate and several characterization techniques has been performed, i.e. XRD, SEM and EDS to study the formed crystalline phase, the morphology of the nanostructures, and the elemental composition of synthesized composites. MWNT-ZnO sensitive layer was tested by exposure to SO2 gas at various operating temperatures and gas concentration. From the performance testing results, it could be found that the composite materials have a prospective as a gas sensor at lower operating temperature with short response time and good sensitivity.

Metal-oxide based ammonia gas sensors: A review

2020 ◽  
Vol 10 ◽  
Author(s):  
Priya Gupta ◽  
Savita Maurya ◽  
Narendra Kumar Pandey ◽  
Vernica Verma
Keyword(s):  
Metal Oxide ◽  
Metal Oxides ◽  
Gas Sensor ◽  
Gas Sensors ◽  
Review Paper ◽  
Gas Sensing ◽  
Gas Sensitivity ◽  
Ammonia Gas ◽  
Ammonia Sensing ◽  
Ammonia Gas Sensors

: This review paper encompasses a study of metal-oxide and their composite based gas sensors used for the detection of ammonia (NH3) gas. Metal-oxide has come into view as an encouraging choice in the gas sensor industry. This review paper focuses on the ammonia sensing principle of the metal oxides. It also includes various approaches adopted for increasing the gas sensitivity of metal-oxide sensors. Increasing the sensitivity of the ammonia gas sensor includes size effects and doping by metal or other metal oxides which will change the microstructure and morphology of the metal oxides. Different parameters that affect the performances like sensitivity, stability, and selectivity of gas sensors are discussed in this paper. Performances of the most operated metal oxides with strengths and limitations in ammonia gas sensing application are reviewed. The challenges for the development of high sensitive and selective ammonia gas sensor are also discussed.

Preparation and Property of Lanthanum Ferrite Formaldehyde Gas Sensor Modified by Carbon Nanotubes and Silver

2013 ◽  
Vol 320 ◽  
pp. 554-557 ◽  
Author(s):  
Yu Min Zhang ◽  
Yu Tao Lin ◽  
Jin Zhang ◽  
Zhong Qi Zhu ◽  
Qiang Liu ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Chemical Synthesis ◽  
Recovery Time ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Sol Gel ◽  
Lanthanum Ferrite ◽  
Gas Sensing Properties ◽  
Response And Recovery ◽  
Sensitive Property

Our previous study revealed that the gas sensitive property of Silver-modified Lanthanum Ferrite (Ag-LaFeO3) is well, but the operating temperature is still high and the sensitivity also needs to be improved. This work based on our previous study. Ag-LaFeO3 was further modified by the Carbon nanoTubes (CNTs). The Ag-LaFeO3 powder modified with CNTs (CNTs-Ag-LaFeO3) was prepared by a sol-gel method combined with microwave chemical synthesis. The structure and gas-sensing properties were investigated. The results show that the structure of CNTs-Ag-LaFeO3 is of orthogonal perovskite. The sensitivity of 0.75% CNTs-Ag-LaFeO3 powder for 1 ppm formaldehyde is 13 at 86°C. The response and recovery time are 100s and 60s, respectively. Moreover, the sensor also has an obvious response for 1ppm formaldehyde at 58°C.

Xylene-sensing of Fe2(MoO4)3 nanoplates prepared via a hydrothermal method

2017 ◽  
Vol 10 (03) ◽  
pp. 1750022 ◽  
Author(s):  
Mengying Xu ◽  
Zhidong Lin ◽  
Wenying Guo ◽  
Yuyuan Hong ◽  
Ping Fu ◽  
...  
Keyword(s):  
Gas Sensors ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Hydrothermal Process ◽  
Optimum Operating ◽  
Average Crystalline Size ◽  
Optimum Operating Temperature ◽  
Recovery Times ◽  
Response And Recovery ◽  
Simple Hydrothermal Process

Fe2(MoO4)3 nanoplates were prepared via a simple hydrothermal process. The average crystalline size of these nanoplates is 85.8[Formula: see text]nm. The sensor based on Fe2(MoO4)3 shows a high gas sensing performance to xylene. The response of Fe2(MoO4)3 sensor is 25.9–100[Formula: see text]ppm xylene at optimum operating temperature of 340[Formula: see text]C. The response and recovery times to 100[Formula: see text]ppm xylene are 4 and 10[Formula: see text]s, respectively. Furthermore, the Fe2(MoO4)3 sensor exhibits remarkable selectivity detection of xylene gas with negligible responses to toluene and benzene. Therefore, the Fe2(MoO4)3 is a promising material for the detection of xylene gas sensors.

Modeling, Design, and Applications of the Gas Sensors Based on Graphene and Carbon Nanotubes

2017 ◽  
pp. 920-946
Author(s):  
Rafael Vargas-Bernal
Keyword(s):  
Carbon Nanotubes ◽  
Gas Sensors ◽  
Carbon Nanomaterials ◽  
Gas Sensing ◽  
Prospective Analysis ◽  
The Third ◽  
Potential Applications ◽  
Technical Advances ◽  
The Impact

Gas sensing continues attracting research communities due to its potential applications in the sectors military, industrial and commercial. A special emphasis is placed on the use of carbon nanomaterials such as carbon nanotubes and graphene, as sensing materials. The chapter will be divided as follows: In the first part, a description of the main topologies and materials (carbon nanomaterials plus polymers, metals, ceramics or combinations between these groups) used to fabricate gas sensors based on graphene and carbon nanotubes that are operated by conductance or resistance electrical, is realized. Next, different mathematical models that can be used to simulate gas sensors based on these materials are presented. In the third part, the impact of the graphene and carbon nanotubes on gas sensors is exemplified with technical advances achieved until now. Finally, it is provided a prospective analysis on the role of the gas sensors based on carbon nanomaterials in the next decades.

SnO2 Nano/Microfibers for Gas Sensors

2020 ◽  
Vol 405 ◽  
pp. 324-329
Author(s):  
Erika Mudra ◽  
Ivan Shepa ◽  
Alexandra Kovalcikova ◽  
Ondrej Milkovič ◽  
Jan Dusza
Keyword(s):  
Gas Sensors ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Band Gap Energy ◽  
Calcination Process ◽  
Sensing Applications ◽  
Amorphous Nature ◽  
Coating Method ◽  
Type Semiconductor

SnO2 is an n-type semiconductor with the band gap energy of 3.6 eV. It has been widely studied for gas sensing applications, the sensitivity of which can be easily tuned by the operating temperature. The presented paper is focused on the preparation and detailed characterization of the hollow SnO2 nano/microfibers suitable for gas detection sensors. Ceramic SnO2 fibers were produced by needleless electrospinning and followed by the calcination process. The characterization was performed by SEM, TEM, XRD, and Raman spectroscopy. The precursor PVP/SnO2 fibers had amorphous nature. The calcination of the electro spun precursor resulted in the formation of hollow crystalline fibrous structures. The formation mechanism of hollow fibers has been described. Subsequently, a homogeneous fibrous layer was created by the spin coating method for gas sensing applications.

scholarly journals A Review of Carbon Nanotubes-Based Gas Sensors

2009 ◽  
Vol 2009 ◽  
pp. 1-24 ◽  
Author(s):  
Yun Wang ◽  
John T. W. Yeow
Keyword(s):  
Carbon Nanotubes ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Low Cost ◽  
High Surface ◽  
Hollow Structure ◽  
Volume Ratio ◽  
Fast Response ◽  
Sensing Technology ◽  
Structure Of Nanomaterials

Gas sensors have attracted intensive research interest due to the demand of sensitive, fast response, and stable sensors for industry, environmental monitoring, biomedicine, and so forth. The development of nanotechnology has created huge potential to build highly sensitive, low cost, portable sensors with low power consumption. The extremely high surface-to-volume ratio and hollow structure of nanomaterials is ideal for the adsorption of gas molecules. Particularly, the advent of carbon nanotubes (CNTs) has fuelled the inventions of gas sensors that exploit CNTs' unique geometry, morphology, and material properties. Upon exposure to certain gases, the changes in CNTs' properties can be detected by various methods. Therefore, CNTs-based gas sensors and their mechanisms have been widely studied recently. In this paper, a broad but yet in-depth survey of current CNTs-based gas sensing technology is presented. Both experimental works and theoretical simulations are reviewed. The design, fabrication, and the sensing mechanisms of the CNTs-based gas sensors are discussed. The challenges and perspectives of the research are also addressed in this review.

Sign in / Sign up

Export Citation Format

Share Document