scholarly journals Component Analysis of Gas Mixture Based on One-Dimensional Convolutional Neural Network

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 347
Author(s):  
Canjian Zhan ◽  
Jiafeng He ◽  
Mingjin Pan ◽  
Dehan Luo
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Recognition Rate ◽  
Component Analysis ◽  
Analysis Method ◽  
Component Identification ◽  
Proposed Model ◽  
Different Types ◽  
Nonlinear Features ◽  
Gas Component

Indoor harmful gases are a considerable threat to the health of residents. In order to improve the accuracy of indoor harmful gas component identification, we propose an indoor toxic gas component analysis method that is based on the combination of bionic olfactory and convolutional neural network. This method uses the convolutional neural network’s ability to extract nonlinear features and identify each component of bionic oflactory respense signal. A comparison with the results of other methods verifies the improvement of recognition rate while with the same level of time cost, which proved the effectiveness of the proposed model. The experimental results showed that the recognition rate of different types and concentrations of harmful gas components reached 90.96% and it solved the problem of mutual interference between gases.

scholarly journals Application of Multi-Dimension Input Convolutional Neural Network in Fault Diagnosis of Rolling Bearings

2019 ◽  
Vol 9 (13) ◽  
pp. 2690 ◽  
Author(s):  
Tao Zan ◽  
Hui Wang ◽  
Min Wang ◽  
Zhihao Liu ◽  
Xiangsheng Gao
Keyword(s):  
Neural Network ◽  
Fault Diagnosis ◽  
Convolutional Neural Network ◽  
Recognition Rate ◽  
Rolling Bearing ◽  
Diagnostic Model ◽  
Original Signal ◽  
Proposed Model ◽  
Convolution Model ◽  
The Stability

Aiming at the problem of poor robustness of the intelligent diagnostic model, a fault diagnosis model of rolling bearing based on a multi-dimension input convolutional neural network (MDI-CNN) is proposed. Compared with the traditional convolution neural network, the proposed model has multiple input layers. Therefore, it can fuse the original signal and processed signal—making full use of advantages of the convolutional neural networks to learn the original signal characteristics automatically, and also improving recognition accuracy and anti-jamming ability. The feasibility and validity of the proposed MDI-CNN are verified, and its advantages are proved by comparison with the other related models. Moreover, the robustness of the model is tested by adding the noise to the test set. Finally, the stability of the model is verified by two experiments. The experimental results show that the proposed model improves the recognition rate, robustness and convergence performance of the traditional convolution model and has good generalization ability.

scholarly journals Nodule Detection with Convolutional Neural Network Using Apache Spark and GPU Frameworks

2021 ◽  
Vol 11 (6) ◽  
pp. 2838
Author(s):  
Nikitha Johnsirani Venkatesan ◽  
Dong Ryeol Shin ◽  
Choon Sung Nam
Keyword(s):  
Neural Network ◽  
Radiation Dose ◽  
Convolutional Neural Network ◽  
Model Performance ◽  
Performance Comparison ◽  
Apache Spark ◽  
Training Time ◽  
Learning Framework ◽  
Proposed Model

In the pharmaceutical field, early detection of lung nodules is indispensable for increasing patient survival. We can enhance the quality of the medical images by intensifying the radiation dose. High radiation dose provokes cancer, which forces experts to use limited radiation. Using abrupt radiation generates noise in CT scans. We propose an optimal Convolutional Neural Network model in which Gaussian noise is removed for better classification and increased training accuracy. Experimental demonstration on the LUNA16 dataset of size 160 GB shows that our proposed method exhibit superior results. Classification accuracy, specificity, sensitivity, Precision, Recall, F1 measurement, and area under the ROC curve (AUC) of the model performance are taken as evaluation metrics. We conducted a performance comparison of our proposed model on numerous platforms, like Apache Spark, GPU, and CPU, to depreciate the training time without compromising the accuracy percentage. Our results show that Apache Spark, integrated with a deep learning framework, is suitable for parallel training computation with high accuracy.

scholarly journals Natural Disasters Intensity Analysis and Classification Based on Multispectral Images Using Multi-Layered Deep Convolutional Neural Network

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2648
Author(s):  
Muhammad Aamir ◽  
Tariq Ali ◽  
Muhammad Irfan ◽  
Ahmad Shaf ◽  
Muhammad Zeeshan Azam ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Natural Disasters ◽  
Deep Convolutional Neural Network ◽  
Multispectral Images ◽  
Learning Techniques ◽  
Proposed Model ◽  
Disaster Intensity ◽  
And Performance

Natural disasters not only disturb the human ecological system but also destroy the properties and critical infrastructures of human societies and even lead to permanent change in the ecosystem. Disaster can be caused by naturally occurring events such as earthquakes, cyclones, floods, and wildfires. Many deep learning techniques have been applied by various researchers to detect and classify natural disasters to overcome losses in ecosystems, but detection of natural disasters still faces issues due to the complex and imbalanced structures of images. To tackle this problem, we propose a multilayered deep convolutional neural network. The proposed model works in two blocks: Block-I convolutional neural network (B-I CNN), for detection and occurrence of disasters, and Block-II convolutional neural network (B-II CNN), for classification of natural disaster intensity types with different filters and parameters. The model is tested on 4428 natural images and performance is calculated and expressed as different statistical values: sensitivity (SE), 97.54%; specificity (SP), 98.22%; accuracy rate (AR), 99.92%; precision (PRE), 97.79%; and F1-score (F1), 97.97%. The overall accuracy for the whole model is 99.92%, which is competitive and comparable with state-of-the-art algorithms.

scholarly journals Methods for Preventing Visual Attacks in Convolutional Neural Networks Based on Data Discard and Dimensionality Reduction

2021 ◽  
Vol 11 (11) ◽  
pp. 5235
Author(s):  
Nikita Andriyanov
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Network Inference ◽  
Recognition Accuracy ◽  
Network Architectures ◽  
Reduced Dimensions ◽  
Different Types ◽  
Rectangular Area ◽  
Noise Impulse ◽  
Selection Of

The article is devoted to the study of convolutional neural network inference in the task of image processing under the influence of visual attacks. Attacks of four different types were considered: simple, involving the addition of white Gaussian noise, impulse action on one pixel of an image, and attacks that change brightness values within a rectangular area. MNIST and Kaggle dogs vs. cats datasets were chosen. Recognition characteristics were obtained for the accuracy, depending on the number of images subjected to attacks and the types of attacks used in the training. The study was based on well-known convolutional neural network architectures used in pattern recognition tasks, such as VGG-16 and Inception_v3. The dependencies of the recognition accuracy on the parameters of visual attacks were obtained. Original methods were proposed to prevent visual attacks. Such methods are based on the selection of “incomprehensible” classes for the recognizer, and their subsequent correction based on neural network inference with reduced image sizes. As a result of applying these methods, gains in the accuracy metric by a factor of 1.3 were obtained after iteration by discarding incomprehensible images, and reducing the amount of uncertainty by 4–5% after iteration by applying the integration of the results of image analyses in reduced dimensions.

A fully automated method of human identification based on dental panoramic radiographs using a convolutional neural network

2021 ◽  
Author(s):  
Young Hyun Kim ◽  
Eun-Gyu Ha ◽  
Kug Jin Jeon ◽  
Chena Lee ◽  
Sang-Sun Han
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
High Speed ◽  
Large Scale ◽  
Oral Surgery ◽  
Human Identification ◽  
Running Time ◽  
Automated Method ◽  
Image Characteristics ◽  
Proposed Model

Objectives: This study aimed to develop a fully automated human identification method based on a convolutional neural network (CNN) with a large-scale dental panoramic radiograph (DPR) dataset. Methods: In total, 2,760 DPRs from 746 subjects who had 2 to 17 DPRs with various changes in image characteristics due to various dental treatments (tooth extraction, oral surgery, prosthetics, orthodontics, or tooth development) were collected. The test dataset included the latest DPR of each subject (746 images) and the other DPRs (2,014 images) were used for model training. A modified VGG16 model with two fully connected layers was applied for human identification. The proposed model was evaluated with rank-1, –3, and −5 accuracies, running time, and gradient-weighted class activation mapping (Grad-CAM)–applied images. Results: This model had rank-1,–3, and −5 accuracies of 82.84%, 89.14%, and 92.23%, respectively. All rank-1 accuracy values of the proposed model were above 80% regardless of changes in image characteristics. The average running time to train the proposed model was 60.9 sec per epoch, and the prediction time for 746 test DPRs was short (3.2 sec/image). The Grad-CAM technique verified that the model automatically identified humans by focusing on identifiable dental information. Conclusion: The proposed model showed good performance in fully automatic human identification despite differing image characteristics of DPRs acquired from the same patients. Our model is expected to assist in the fast and accurate identification by experts by comparing large amounts of images and proposing identification candidates at high speed.

scholarly journals Image Registration Algorithm Based on Convolutional Neural Network and Local Homography Transformation

2020 ◽  
Vol 10 (3) ◽  
pp. 732 ◽  
Author(s):  
Yuanwei Wang ◽  
Mei Yu ◽  
Gangyi Jiang ◽  
Zhiyong Pan ◽  
Jiqiang Lin
Keyword(s):  
Neural Network ◽  
Image Registration ◽  
Convolutional Neural Network ◽  
Estimation Algorithm ◽  
Matrix Estimation ◽  
Registration Algorithm ◽  
Image Registration Algorithm ◽  
Different Types ◽  
Homography Transformation ◽  
Traditional Image

In order to overcome the poor robustness of traditional image registration algorithms in illuminating and solving the problem of low accuracy of a learning-based image homography matrix estimation algorithm, an image registration algorithm based on convolutional neural network (CNN) and local homography transformation is proposed. Firstly, to ensure the diversity of samples, a sample and label generation method based on moving direct linear transformation (MDLT) is designed. The generated samples and labels can effectively reflect the local characteristics of images and are suitable for training the CNN model with which multiple pairs of local matching points between two images to be registered can be calculated. Then, the local homography matrices between the two images are estimated by using the MDLT and finally the image registration can be realized. The experimental results show that the proposed image registration algorithm achieves higher accuracy than other commonly used algorithms such as the SIFT, ORB, ECC, and APAP algorithms, as well as another two learning-based algorithms, and it has good robustness for different types of illumination imaging.

scholarly journals RICNN: A ResNet&Inception convolutional neural network for intrusion detection of abnormal traffic

2021 ◽  
pp. 55-55
Author(s):  
Benhui Xia ◽  
Dezhi Han ◽  
Ximing Yin ◽  
Gao Na
Keyword(s):  
Neural Network ◽  
Intrusion Detection ◽  
Convolutional Neural Network ◽  
Detection Rate ◽  
Recognition Rate ◽  
Identification Accuracy ◽  
Detection Accuracy ◽  
Traffic Classification ◽  
High Detection Rate ◽  
Network Intrusion

To secure cloud computing and outsourced data while meeting the requirements of automation, many intrusion detection schemes based on deep learn ing are proposed. Though the detection rate of many network intrusion detection solutions can be quite high nowadays, their identification accuracy on imbalanced abnormal network traffic still remains low. Therefore, this paper proposes a ResNet &Inception-based convolutional neural network (RICNN) model to abnormal traffic classification. RICNN can learn more traffic features through the Inception unit, and the degradation problem of the network is eliminated through the direct map ping unit of ResNet, thus the improvement of the model?s generalization ability can be achievable. In addition, to simplify the network, an improved version of RICNN, which makes it possible to reduce the number of parameters that need to be learnt without degrading identification accuracy, is also proposed in this paper. The experimental results on the dataset CICIDS2017 show that RICNN not only achieves an overall accuracy of 99.386% but also has a high detection rate across different categories, especially for small samples. The comparison experiments show that the recognition rate of RICNN outperforms a variety of CNN models and RNN models, and the best detection accuracy can be achieved.

Sign in / Sign up

Export Citation Format

Share Document