scholarly journals Heater Integrated Lab-on-a-Chip Device for Rapid HLA Alleles Amplification towards Prevention of Drug Hypersensitivity

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3413
Author(s):  
Shah Uddin ◽  
Abkar Sayad ◽  
Jianxiong Chan ◽  
Duc Huynh ◽  
Efstratios Skafidas ◽  
...  
Keyword(s):  
Point Of Care ◽  
Drug Hypersensitivity ◽  
Lamp Assay ◽  
Lab On A Chip ◽  
Screening Process ◽  
Device Development ◽  
Life Threatening ◽  
3D Printed ◽  
Human Genomic ◽  
On Chip

HLA-B*15:02 screening before administering carbamazepine is recommended to prevent life-threatening hypersensitivity. However, the unavailability of a point-of-care device impedes this screening process. Our research group previously developed a two-step HLA-B*15:02 detection technique utilizing loop-mediated isothermal amplification (LAMP) on the tube, which requires two-stage device development to translate into a portable platform. Here, we report a heater-integrated lab-on-a-chip device for the LAMP amplification, which can rapidly detect HLA-B alleles colorimetrically. A gold-patterned micro-sized heater was integrated into a 3D-printed chip, allowing microfluidic pumping, valving, and incubation. The performance of the chip was tested with color dye. Then LAMP assay was conducted with human genomic DNA samples of known HLA-B genotypes in the LAMP-chip parallel with the tube assay. The LAMP-on-chip results showed a complete match with the LAMP-on-tube assay, demonstrating the detection system’s concurrence.

scholarly journals 3D printed microfluidic lab-on-a-chip device for fiber-based dual beam optical manipulation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Haoran Wang ◽  
Anton Enders ◽  
John-Alexander Preuss ◽  
Janina Bahnemann ◽  
Alexander Heisterkamp ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Single Cells ◽  
Lab On A Chip ◽  
Cost Effective ◽  
Optical Manipulation ◽  
Hydrodynamic Focusing ◽  
Trapping Region ◽  
Dual Beam ◽  
3D Printed ◽  
On Chip

Abstract3D printing of microfluidic lab-on-a-chip devices enables rapid prototyping of robust and complex structures. In this work, we designed and fabricated a 3D printed lab-on-a-chip device for fiber-based dual beam optical manipulation. The final 3D printed chip offers three key features, such as (1) an optimized fiber channel design for precise alignment of optical fibers, (2) an optically clear window to visualize the trapping region, and (3) a sample channel which facilitates hydrodynamic focusing of samples. A square zig–zag structure incorporated in the sample channel increases the number of particles at the trapping site and focuses the cells and particles during experiments when operating the chip at low Reynolds number. To evaluate the performance of the device for optical manipulation, we implemented on-chip, fiber-based optical trapping of different-sized microscopic particles and performed trap stiffness measurements. In addition, optical stretching of MCF-7 cells was successfully accomplished for the purpose of studying the effects of a cytochalasin metabolite, pyrichalasin H, on cell elasticity. We observed distinct changes in the deformability of single cells treated with pyrichalasin H compared to untreated cells. These results demonstrate that 3D printed microfluidic lab-on-a-chip devices offer a cost-effective and customizable platform for applications in optical manipulation.

scholarly journals 3D-Printed Lab-on-a-Chip Diagnostic Systems-Developing a Safe-by-Design Manufacturing Approach

Micromachines ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 825
Author(s):  
Panagiotis Karayannis ◽  
Fotini Petrakli ◽  
Anastasia Gkika ◽  
Elias P. Koumoulos
Keyword(s):  
Effective Means ◽  
Ultrafine Particle ◽  
Lab On A Chip ◽  
Cost Effective ◽  
Diagnostic Systems ◽  
Fused Filament Fabrication ◽  
Device Development ◽  
Volatile Organic ◽  
3D Printed ◽  
Safe By Design

The aim of this study is to provide a detailed strategy for Safe-by-Design (SbD) 3D-printed lab-on-a-chip (LOC) device manufacturing, using Fused Filament Fabrication (FFF) technology. First, the applicability of FFF in lab-on-a-chip device development is briefly discussed. Subsequently, a methodology to categorize, identify and implement SbD measures for FFF is suggested. Furthermore, the most crucial health risks involved in FFF processes are examined, placing the focus on the examination of ultrafine particle (UFP) and Volatile Organic Compound (VOC) emission hazards. Thus, a SbD scheme for lab-on-a-chip manufacturing is provided, while also taking into account process optimization for obtaining satisfactory printed LOC quality. This work can serve as a guideline for the effective application of FFF technology for lab-on-a-chip manufacturing through the safest applicable way, towards a continuous effort to support sustainable development of lab-on-a-chip devices through cost-effective means.

scholarly journals A handheld point-of-care system for rapid detection of SARS-CoV-2 in under 20 minutes

2020 ◽  
Author(s):  
Jesus Rodriguez-Manzano ◽  
Kenny Malpartida-Cardenas ◽  
Nicolas Moser ◽  
Ivana Pennisi ◽  
Matthew Cavuto ◽  
...  
Keyword(s):  
Real Time ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Lamp Assay ◽  
High Rate ◽  
Epidemiological Surveillance ◽  
Clinical Samples ◽  
Lab On Chip ◽  
Point Of Care System ◽  
On Chip

AbstractThe COVID-19 pandemic is a global health emergency characterized by the high rate of transmission and ongoing increase of cases globally. Rapid point-of-care (PoC) diagnostics to detect the causative virus, SARS-CoV-2, are urgently needed to identify and isolate patients, contain its spread and guide clinical management. In this work, we report the development of a rapid PoC diagnostic test (< 20 min) based on reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) and semiconductor technology for the detection of SARS-CoV-2 from extracted RNA samples. The developed LAMP assay was tested on a real-time benchtop instrument (RT-qLAMP) showing a lower limit of detection of 10 RNA copies per reaction. It was validated against 183 clinical samples including 127 positive samples (screened by the CDC RT-qPCR assay). Results showed 90.55% sensitivity and 100% specificity when compared to RT-qPCR and average positive detection times of 15.45 ± 4.43 min. For validating the incorporation of the RT-LAMP assay onto our PoC platform (RT-eLAMP), a subset of samples was tested (n=40), showing average detection times of 12.89 ± 2.59 min for positive samples (n=34), demonstrating a comparable performance to a benchtop commercial instrument. Paired with a smartphone for results visualization and geo-localization, this portable diagnostic platform with secure cloud connectivity will enable real-time case identification and epidemiological surveillance.One Sentence SummaryWe demonstrate isothermal detection of SARS-CoV-2 in under 20 minutes from extracted RNA samples with a handheld Lab-on-Chip platform.

scholarly journals 3D Printed Lab-on-a-Chip Diagnostic Systems - Developing a Safe-by-Design Manufacturing Approach

2019 ◽  
Author(s):  
Panagiotis Karayannis ◽  
Fotini Petrakli ◽  
Anastasia Gkika ◽  
Elias Koumoulos
Keyword(s):  
Effective Means ◽  
Ultrafine Particle ◽  
Lab On A Chip ◽  
Cost Effective ◽  
Diagnostic Systems ◽  
Fused Filament Fabrication ◽  
Device Development ◽  
Volatile Organic ◽  
3D Printed ◽  
Safe By Design

The aim of this study is to provide a detailed strategy for Safe-by-Design (SbD) 3D printed lab-on-a-chip (LOC) device manufacturing, using Fused Filament Fabrication (FFF) technology. At first, the applicability of FFF in lab-on-a-chip device development is briefly discussed. Subsequently, a methodology to categorize, identify and implement SbD measures for FFF is suggested. Furthermore, the most crucial health risks involved in FFF processes are examined, placing the focus on the examination of ultrafine particle (UFP) and Volatile Organic Compound (VOC) emission hazards. Thus, a SbD scheme for lab-on-a-chip manufacturing is provided, while also taking into account process optimization for obtaining satisfactory printed LOC quality. This work can serve as a guideline for the effective application of FFF technology for lab-on-a-chip manufacturing through the safest applicable way, towards a continuous effort to support sustainable development of lab-on-a-chip devices through cost-effective means.

scholarly journals A Nontoxic Battery with 3D-Printed Housing for On-Demand Operation of Microcontrollers in Microfluidic Sensors

Micromachines ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 588 ◽  
Author(s):  
Kai Sachsenheimer ◽  
Christiane Richter ◽  
Dorothea Helmer ◽  
Frederik Kotz ◽  
Bastian Ernst Rapp
Keyword(s):  
Data Collection ◽  
Field Experiments ◽  
Point Of Care ◽  
Operation Mode ◽  
Lab On A Chip ◽  
Capacitive Sensor ◽  
Liquid Mixtures ◽  
On Demand ◽  
Care Systems ◽  
3D Printed

Microcontrollers have a low energy consumption and are convenient tools for the operation and readout of small lab-on-a-chip devices. The operation of microcontrollers for data collection and analysis is key for measurements and statistics in field experiments. However, for portable lab-on-a-chip or point-of-care systems in low-resource settings, the availability of energy sources is a bottleneck. Here, we present a simple, nontoxic aluminum/air redox battery with a 3D-printed housing for on-demand operation of a sensor using a microcontroller for data collection. The battery is stored in a dry state and can be manufactured conveniently using off-the-shelf components and a simple 3D printer. It can be quickly assembled and operates a microcontroller for at least one hour in continuous operation mode. We demonstrate its performance by collecting data from a capacitive sensor capable of determining the conductivity of liquid samples. Such sensors can be used for, e.g., determining the water quality or phase formation in liquid mixtures. The sensor performance in determining different conductivities of nonconductive and conductive liquids in droplets is demonstrated.

scholarly journals Hybrid 3D printed-paper microfluidics

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Arthur Zargaryan ◽  
Nathalie Farhoudi ◽  
George Haworth ◽  
Julian F. Ashby ◽  
Sam H. Au
Keyword(s):  
Point Of Care ◽  
Paper Microfluidics ◽  
Point Of Care Testing ◽  
Lab On Chip ◽  
Fluid Handling ◽  
Paper Based Microfluidics ◽  
Specialized Equipment ◽  
3D Printed ◽  
On Chip ◽  
Hybrid Devices

Abstract 3D printed and paper-based microfluidics are promising formats for applications that require portable miniaturized fluid handling such as point-of-care testing. These two formats deployed in isolation, however, have inherent limitations that hamper their capabilities and versatility. Here, we present the convergence of 3D printed and paper formats into hybrid devices that overcome many of these limitations, while capitalizing on their respective strengths. Hybrid channels were fabricated with no specialized equipment except a commercial 3D printer. Finger-operated reservoirs and valves capable of fully-reversible dispensation and actuation were designed for intuitive operation without equipment or training. Components were then integrated into a versatile multicomponent device capable of dynamic fluid pathing. These results are an early demonstration of how 3D printed and paper microfluidics can be hybridized into versatile lab-on-chip devices.

Gold-Aptamer-Nanoconstructs Engineered to Detect Conserved Enteroviral Nucleic Acid Sequences

2019 ◽  
Author(s):  
Veeren Chauhan ◽  
Mohamed M Elsutohy ◽  
C Patrick McClure ◽  
Will Irving ◽  
Neil Roddis ◽  
...  
Keyword(s):  
Nucleic Acid ◽  
In Silico ◽  
Point Of Care ◽  
Lateral Flow ◽  
Nucleic Acid Sequence ◽  
In Silico Screening ◽  
Lateral Flow Assays ◽  
Life Threatening ◽  
Software And Hardware ◽  
Nucleic Acid Sequences

<p>Enteroviruses are a ubiquitous mammalian pathogen that can produce mild to life-threatening disease. Bearing this in mind, we have developed a rapid, accurate and economical point-of-care biosensor that can detect a nucleic acid sequences conserved amongst 96% of all known enteroviruses. The biosensor harnesses the physicochemical properties of gold nanoparticles and aptamers to provide colourimetric, spectroscopic and lateral flow-based identification of an exclusive enteroviral RNA sequence (23 bases), which was identified through in silico screening. Aptamers were designed to demonstrate specific complementarity towards the target enteroviral RNA to produce aggregated gold-aptamer nanoconstructs. Conserved target enteroviral nucleic acid sequence (≥ 1x10<sup>-7</sup> M, ≥1.4×10<sup>-14</sup> g/mL), initiates gold-aptamer-nanoconstructs disaggregation and a signal transduction mechanism, producing a colourimetric and spectroscopic blueshift (544 nm (purple) > 524 nm (red)). Furthermore, lateral-flow-assays that utilise gold-aptamer-nanoconstructs were unaffected by contaminating human genomic DNA, demonstrated rapid detection of conserved target enteroviral nucleic acid sequence (< 60 s) and could be interpreted with a bespoke software and hardware electronic interface. We anticipate our methodology will translate in-silico screening of nucleic acid databases to a tangible enteroviral desktop detector, which could be readily translated to related organisms. This will pave-the-way forward in the clinical evaluation of disease and complement existing strategies at overcoming antimicrobial resistance.</p>

Telemedicine-guided point-of-care ultrasound can be feasible and effective in a life-threatening situation: The case of a field hospital during the COVID-19 pandemic (Preprint)

2020 ◽  
Author(s):  
Tarso Accorsi ◽  
Karine De Amicis Lima ◽  
Alexandra Brigido ◽  
Deborah Belfort ◽  
Fabio Habrum ◽  
...  
Keyword(s):  
Point Of Care ◽  
Image Interpretation ◽  
Acquisition Time ◽  
Point Of Care Ultrasound ◽  
Field Hospital ◽  
Portable Ultrasound ◽  
Local Staff ◽  
Assessment Protocol ◽  
Life Threatening ◽  
Threatening Situation

BACKGROUND Lightweight portable ultrasound is widely available, especially in inaccessible geographical areas. It demonstrates effectiveness and diagnosis improvement even in field conditions but no precise information about protocols, acquisition time, image interpretation, and the relevance in changing medical conduct exists. The COVID-19 pandemic implied many severe cases and the rapid construction of field hospitals with massive general practitioner (GP) recruitment. OBJECTIVE This prospective and descriptive study aimed to evaluate the feasibility of telemedicine guidance using a standardized multi-organ sonographic assessment protocol in untrained GPs during a COVID-19 emergency in a field hospital. METHODS Eleven COVID-19 in-patients presenting life-threatening complications, attended by local staff who spontaneously requested on-time teleconsultation, were enrolled. All untrained doctors successfully positioned the transducer and obtained key images guided by a remote doctor via telemedicine, with remote interpretation of the findings. RESULTS Only four (36%) general practitioners obtained the appropriate key heart image on the left parasternal long axis window, and three (27%) had an image interpreted remotely on-time. The evaluation time ranged from seven to 42 minutes, with a mean of 22.7 + 12. CONCLUSIONS Telemedicine is effective in guiding GPs to perform portable ultrasound in life-threatening situations, showing effectiveness in conducting decisions.

3D Printed Smart Silk Wearable Sensors

The Analyst ◽  
2021 ◽  
Author(s):  
Tianshu Chu ◽  
Huili Wang ◽  
Yumeng Qiu ◽  
Haoxi Luo ◽  
Bingfang He ◽  
...  
Keyword(s):  
Point Of Care ◽  
Wearable Sensors ◽  
Point Of Care Testing ◽  
Biochemical Sensing ◽  
3D Printed ◽  
Physiological And Biochemical

Wearable sensors play a key role in point-of-care testing (POCT) for its flexible and integration capability on sensitive physiological and biochemical sensing. Here, we present a multifunction wearable silk patch...

Sign in / Sign up

Export Citation Format

Share Document