scholarly journals Classification of Bladder Emptying Patterns by LSTM Neural Network Trained Using Acoustic Signatures

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5328
Author(s):  
Jie Jin ◽  
Youngbeen Chung ◽  
Wanseung Kim ◽  
Yonggi Heo ◽  
Jinyong Jeon ◽  
...  
Keyword(s):  
Short Term Memory ◽  
Learning Algorithm ◽  
Final Analysis ◽  
Tertiary Hospital ◽  
Non Invasive ◽  
Bladder Emptying ◽  
Acoustic Signatures ◽  
Deep Learning Algorithm ◽  
Acoustic Signature ◽  
Urinary Tract Symptoms

(1) Background: Non-invasive uroflowmetry is used in clinical practice for diagnosing lower urinary tract symptoms (LUTS) and the health status of a patient. To establish a smart system for measuring the flowrate during urination without any temporospatial constraints for patients with a urinary disorder, the acoustic signatures from the uroflow of patients being treated for LUTS at a tertiary hospital were utilized. (2) Methods: Uroflowmetry data were collected for construction and verification of a long short-term memory (LSTM) deep-learning algorithm. The initial sample size comprised 34 patients; 27 patients were included in the final analysis. Uroflow sounds generated from flow impacts on a structure were analyzed by loudness and roughness parameters. (3) Results: A similar signal pattern to the clinical urological measurements was observed and applied for health diagnosis. (4) Conclusions: Consistent flowrate values were obtained by applying the uroflow sound samples from the randomly selected patients to the constructed model for validation. The flowrate predicted using the acoustic signature accurately demonstrated actual physical characteristics. This could be used for developing a new smart flowmetry device applicable in everyday life with minimal constraints from settings and enable remote diagnosis of urinary system diseases by objective continuous measurements of bladder emptying function.

scholarly journals An Improved Deep Learning Algorithm for Risk Prediction of Corporate Internet Reporting

2020 ◽  
Vol 34 (4) ◽  
pp. 437-444
Author(s):  
Lingyan Ou ◽  
Ling Chen
Keyword(s):  
Deep Learning ◽  
Risk Prediction ◽  
Short Term Memory ◽  
Learning Algorithm ◽  
Moving Average ◽  
Arma Model ◽  
Evaluation Index System ◽  
Online Information ◽  
Deep Learning Algorithm ◽  
Research Findings

Corporate internet reporting (CIR) has such advantages as the strong timeliness, large amount, and wide coverage of financial information. However, the CIR, like any other online information, faces various risks. With the aid of the increasingly sophisticated artificial intelligence (AI) technology, this paper proposes an improved deep learning algorithm for the prediction of CIR risks, aiming to improve the accuracy of CIR risk prediction. After building a reasonable evaluation index system (EIS) for CIR risks, the data involved in risk rating and the prediction of risk transmission effect (RTE) were subject to structured feature extraction and time series construction. Next, a combinatory CIR risk prediction model was established by combining the autoregressive moving average (ARMA) model with long short-term memory (LSTM). The former is good at depicting linear series, and the latter excels in describing nonlinear series. Experimental results demonstrate the effectiveness of the ARMA-LSTM model. The research findings provide a good reference for applying AI technology in risk prediction of other areas.

Intraocular Pressure Estimation Method Based on Vibration Propagation Characteristics According to Structure Contact

2021 ◽  
Vol 263 (1) ◽  
pp. 5552-5554
Author(s):  
Kim Deukha ◽  
Seongwook Jeon ◽  
Won June Lee ◽  
Junhong Park
Keyword(s):  
Intraocular Pressure ◽  
Short Term Memory ◽  
Learning Algorithm ◽  
Ex Vivo ◽  
Estimation Method ◽  
Biological Tissues ◽  
Response To Treatment ◽  
Deep Learning Algorithm ◽  
Cross Correlation Analysis ◽  
Porcine Eyes

Intraocular pressure (IOP) measurement is one of the basic tests performed in ophthalmology and is known to be an important risk factor for the development and progression of glaucoma. Measurement of IOP is important for assessing response to treatment and monitoring the progression of the disease in glaucoma. In this study, we investigate a method for measuring IOP using the characteristics of vibration propagation generated when the structure is in contact with the eyeball. The response was measured using an accelerometer and a force sensitive resistor to determine the correlation between the IOP. Experiment was performed using ex-vivo porcine eyes. To control the IOP, a needle of the infusion line connected with the water bottle was inserted into the porcine eyes through the limbus. A cross correlation analysis between the accelerometer and the force sensitive resistor was performed to derive a vibration factor that indicate the change in IOP. In order to analyze the degree of influence of biological tissues such as the eyelid, silicon was placed between the structure and the eyeball. The Long Short-Term Memory (LSTM) deep learning algorithm was used to predict IOP based on the vibration factor.

scholarly journals A Deep Learning Model for Screening Type 2 Diabetes from Retinal Photographs

2021 ◽  
Author(s):  
Jae-Seung Yun ◽  
Jaesik Kim ◽  
Sang-Hyuk Jung ◽  
Seon-Ah Cha ◽  
Seung-Hyun Ko ◽  
...  
Keyword(s):  
Type 2 Diabetes ◽  
Deep Learning ◽  
Learning Algorithm ◽  
Learning Model ◽  
Retinal Images ◽  
Uk Biobank ◽  
Non Invasive ◽  
Deep Learning Algorithm ◽  
Deep Learning Model

Objective: We aimed to develop and evaluate a non-invasive deep learning algorithm for screening type 2 diabetes in UK Biobank participants using retinal images. Research Design and Methods: The deep learning model for prediction of type 2 diabetes was trained on retinal images from 50,077 UK Biobank participants and tested on 12,185 participants. We evaluated its performance in terms of predicting traditional risk factors (TRFs) and genetic risk for diabetes. Next, we compared the performance of three models in predicting type 2 diabetes using 1) an image-only deep learning algorithm, 2) TRFs, 3) the combination of the algorithm and TRFs. Assessing net reclassification improvement (NRI) allowed quantification of the improvement afforded by adding the algorithm to the TRF model. Results: When predicting TRFs with the deep learning algorithm, the areas under the curve (AUCs) obtained with the validation set for age, sex, and HbA1c status were 0.931 (0.928-0.934), 0.933 (0.929-0.936), and 0.734 (0.715-0.752), respectively. When predicting type 2 diabetes, the AUC of the composite logistic model using non-invasive TRFs was 0.810 (0.790-0.830), and that for the deep learning model using only fundus images was 0.731 (0.707-0.756). Upon addition of TRFs to the deep learning algorithm, discriminative performance was improved to 0.844 (0.826-0.861). The addition of the algorithm to the TRFs model improved risk stratification with an overall NRI of 50.8%. Conclusions: Our results demonstrate that this deep learning algorithm can be a useful tool for stratifying individuals at high risk of type 2 diabetes in the general population.

scholarly journals NanoReviser: An Error-correction Tool for Nanopore Sequencing Based on a Deep Learning Algorithm

2020 ◽  
Author(s):  
Luotong Wang ◽  
Li Qu ◽  
Longshu Yang ◽  
Yiying Wang ◽  
Huaiqiu Zhu
Keyword(s):  
Deep Learning ◽  
Error Rate ◽  
Short Term Memory ◽  
Learning Algorithm ◽  
Consensus Sequence ◽  
Sequencing Error ◽  
Nanopore Sequencing ◽  
Electrical Signals ◽  
E Coli ◽  
Deep Learning Algorithm

AbstractNanopore sequencing is regarded as one of the most promising third-generation sequencing (TGS) technologies. Since 2014, Oxford Nanopore Technologies (ONT) has developed a series of devices based on nanopore sequencing to produce very long reads, with an expected impact on genomics. However, the nanopore sequencing reads are susceptible to a fairly high error rate owing to the difficulty in identifying the DNA bases from the complex electrical signals. Although several basecalling tools have been developed for nanopore sequencing over the past years, it is still challenging to correct the sequences after applying the basecalling procedure. In this study, we developed an open-source DNA basecalling reviser, NanoReviser, based on a deep learning algorithm to correct the basecalling errors introduced by current basecallers provided by default. In our module, we re-segmented the raw electrical signals based on the basecalled sequences provided by the default basecallers. By employing convolution neural networks (CNNs) and bidirectional long short-term memory (Bi-LSTM) networks, we took advantage of the information from the raw electrical signals and the basecalled sequences from the basecallers. Our results showed NanoReviser, as a post-basecalling reviser, significantly improving the basecalling quality. After being trained on standard ONT sequencing reads from public E. coli and human NA12878 datasets, NanoReviser reduced the sequencing error rate by over 5% for both the E. coli dataset and the human dataset. The performance of NanoReviser was found to be better than those of all current basecalling tools. Furthermore, we analyzed the modified bases of the E. coli dataset and added the methylation information to train our module. With the methylation annotation, NanoReviser reduced the error rate by 7% for the E. coli dataset and specifically reduced the error rate by over 10% for the regions of the sequence rich in methylated bases. To the best of our knowledge, NanoReviser is the first post-processing tool after basecalling to accurately correct the nanopore sequences without the time-consuming procedure of building the consensus sequence. The NanoReviser package is freely available at https://github.com/pkubioinformatics/NanoReviser.

scholarly journals Real Time LDR Data Prediction using IoT and Deep Learning Algorithm

2020 ◽  
pp. 158-161
Author(s):  
Chandraprabha S ◽  
Pradeepkumar G ◽  
Dineshkumar Ponnusamy ◽  
Saranya M D ◽  
Satheesh Kumar S ◽  
...  
Keyword(s):  
Deep Learning ◽  
Light Intensity ◽  
Real Time ◽  
Short Term Memory ◽  
Learning Algorithm ◽  
Time Interval ◽  
Deep Learning Algorithm ◽  
Data Prediction ◽  
Solar Plant

This paper outfits artificial intelligence based real time LDR data which is implemented in various applications like indoor lightning, and places where enormous amount of heat is produced, agriculture to increase the crop yield, Solar plant for solar irradiance Tracking. For forecasting the LDR information. The system uses a sensor that can measure the light intensity by means of LDR. The data acquired from sensors are posted in an Adafruit cloud for every two seconds time interval using Node MCU ESP8266 module. The data is also presented on adafruit dashboard for observing sensor variables. A Long short-term memory is used for setting up the deep learning. LSTM module uses the recorded historical data from adafruit cloud which is paired with Node MCU in order to obtain the real-time long-term time series sensor variables that is measured in terms of light intensity. Data is extracted from the cloud for processing the data analytics later the deep learning model is implemented in order to predict future light intensity values.

scholarly journals Deep learning algorithm evaluation of hypertension classification in less photoplethysmography signals conditions

2021 ◽  
Vol 54 (3-4) ◽  
pp. 439-445
Author(s):  
Chih-Ta Yen ◽  
Sheng-Nan Chang ◽  
Cheng-Hong Liao
Keyword(s):  
Deep Learning ◽  
Short Term Memory ◽  
Learning Algorithm ◽  
Training Data ◽  
Short Term ◽  
Deep Learning Algorithm ◽  
Testing Dataset ◽  
Data Points ◽  
Optimal Classification ◽  
Long Short Term Memory

This study used photoplethysmography signals to classify hypertensive into no hypertension, prehypertension, stage I hypertension, and stage II hypertension. There are four deep learning models are compared in the study. The difficulties in the study are how to find the optimal parameters such as kernel, kernel size, and layers in less photoplethysmographyt (PPG) training data condition. PPG signals were used to train deep residual network convolutional neural network (ResNetCNN) and bidirectional long short-term memory (BILSTM) to determine the optimal operating parameters when each dataset consisted of 2100 data points. During the experiment, the proportion of training and testing datasets was 8:2. The model demonstrated an optimal classification accuracy of 76% when the testing dataset was used.

Sign in / Sign up

Export Citation Format

Share Document