scholarly journals Spatiotemporal Patterns and Drivers of the Surface Urban Heat Island in 36 Major Cities in China: A Comparison of Two Different Methods for Delineating Rural Areas

2020 ◽  
Vol 12 (2) ◽  
pp. 478 ◽  
Author(s):  
Lu Niu ◽  
Ronglin Tang ◽  
Yazhen Jiang ◽  
Xiaoming Zhou
Keyword(s):  
Urban Heat Island ◽  
Rural Areas ◽  
Statistical Data ◽  
Mainland China ◽  
Urban Heat Islands ◽  
Anthropogenic Factors ◽  
Heat Island ◽  
Urban Heat ◽  
Surface Urban Heat Island ◽  
Moderate Resolution Imaging Spectroradiometer

Urban heat islands (UHIs) are an important issue in urban sustainability, and the standardized calculation of surface urban heat island (SUHI) intensity has been a common concern of researchers in the past. In this study, we used the administrative borders (AB) method and an optimized simplified urban-extent (OSUE) algorithm to calculate the surface urban heat island intensity from 2001 to 2017 for 36 major cities in mainland China by using Moderate Resolution Imaging Spectroradiometer (MODIS) images. The spatiotemporal differences between these two methods were analyzed from the perspectives of the regional and national patterns and the daily, monthly, and annual trends. Regardless of the spatial or temporal scale, the calculation results of these two methods showed extremely similar patterns, especially for the daytime. However, when the calculated SUHI intensities were investigated through a regression analysis with multiple driving factors, we found that, although natural conditions were the main drivers for both methods, the anthropogenic factors obtained from statistical data (population and gross domestic product) were more correlated with the SUHI intensity from the AB method. This trend was probably caused by the spatial extent of the statistical data, which aligned more closely with the rural extent in the AB method. This study not only explores the standardization of the calculation of urban heat intensity but also provides insights into the relationship between urban development and the SUHI.

scholarly journals Comparasion of NDBI and NDVI as Indicators of Surface Urban Heat Island Effect in Landsat 8 Imagery: A Case Study of Iasi

2017 ◽  
Vol 11 (2) ◽  
pp. 141-150 ◽  
Author(s):  
Paul Macarof ◽  
Florian Statescu
Keyword(s):  
Urban Heat Island ◽  
Rural Areas ◽  
Land Surface ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Landsat 8 ◽  
Heat Island ◽  
Sensing Technology ◽  
Urban Heat ◽  
Surface Urban Heat Island

Abstract This study compares the normalized difference built-up index (NDBI) and normalized difference vegetation index (NDVI) as indicators of surface urban heat island effects in Landsat-8 OLI imagery by investigating the relationships between the land surface temperature (LST), NDBI and NDVI. The urban heat island (UHI) represents the phenomenon of higher atmospheric and surface temperatures occurring in urban area or metropolitan area than in the surrounding rural areas due to urbanization. With the development of remote sensing technology, it has become an important approach to urban heat island research. Landsat data were used to estimate the LST, NDBI and NDVI from four seasons for Iasi municipality area. This paper indicates than there is a strong linear relationship between LST and NDBI, whereas the relationship between LST and NDVI varies by season. This paper suggests, NDBI is an accurate indicator of surface UHI effects and can be used as a complementary metric to the traditionally applied NDVI.

Greening in Rural Areas Increases the Surface Urban Heat Island Intensity

2019 ◽  
Vol 46 (4) ◽  
pp. 2204-2212 ◽  
Author(s):  
Rui Yao ◽  
Lunche Wang ◽  
Xin Huang ◽  
Wei Gong ◽  
Xiangao Xia
Keyword(s):  
Urban Heat Island ◽  
Rural Areas ◽  
Urban Heat Island Intensity ◽  
Heat Island ◽  
Urban Heat ◽  
Surface Urban Heat Island

scholarly journals Effect of Land Cover Fractions on Changes in Surface Urban Heat Islands Using Landsat Time-Series Images

2019 ◽  
Vol 16 (6) ◽  
pp. 971 ◽  
Author(s):  
Tao Chen ◽  
Anchang Sun ◽  
Ruiqing Niu
Keyword(s):  
Land Cover ◽  
Urban Heat Island ◽  
Land Surface ◽  
Urban Heat Islands ◽  
Urban Heat Island Intensity ◽  
Heat Island ◽  
Impervious Surfaces ◽  
Heat Islands ◽  
Urban Heat ◽  
Surface Urban Heat Island

Man-made materials now cover a dominant proportion of urban areas, and such conditions not only change the absorption of solar radiation, but also the allocation of the solar radiation and cause the surface urban heat island effect, which is considered a serious problem associated with the deterioration of urban environments. Although numerous studies have been performed on surface urban heat islands, only a few have focused on the effect of land cover changes on surface urban heat islands over a long time period. Using six Landsat image scenes of the Metropolitan Development Area of Wuhan, our experiment (1) applied a mapping method for normalized land surface temperatures with three land cover fractions, which were impervious surfaces, non-chlorophyllous vegetation and soil and vegetation fractions, and (2) performed a fitting analysis of fierce change areas in the surface urban heat island intensity based on a time trajectory. Thematic thermal maps were drawn to analyze the distribution of and variations in the surface urban heat island in the study area. A Multiple Endmember Spectral Mixture Analysis was used to extract the land cover fraction information. Then, six ternary triangle contour graphics were drawn based on the land surface temperature and land cover fraction information. A time trajectory was created to summarize the changing characteristics of the surface urban heat island intensity. A fitting analysis was conducted for areas showing fierce changes in the urban heat intensity. Our results revealed that impervious surfaces had the largest impacts on surface urban heat island intensity, followed by the non-chlorophyllous vegetation and soil fraction. Moreover, the results indicated that the vegetation fraction can alleviate the occurrence of surface urban heat islands. These results reveal the impact of the land cover fractions on surface urban heat islands. Urban expansion generates impervious artificial objects that replace pervious natural objects, which causes an increase in land surface temperature and results in a surface urban heat island.

scholarly journals Evaluating the roles of green and built-up areas in reducing a surface urban heat island using remote sensing data

Urbani izziv ◽  
2019 ◽  
Vol 2 (30) ◽  
pp. 105-112
Author(s):  
Gordana Kaplan
Keyword(s):  
Urban Heat Island ◽  
Rural Areas ◽  
Land Surface ◽  
Remote Sensing Data ◽  
Heat Island ◽  
Negative Effects ◽  
Rapid Urbanization ◽  
Green Areas ◽  
Urban Heat ◽  
Surface Urban Heat Island

Rapid urbanization has several negative effects on both the environment and human health. Urbanization has also become an important contributor to global warming. One of these effects is the urban heat island (UHI), which is caused by human activities and defined as the temperature difference between urban and surrounding rural areas. With rapid urbanization in the past few decades, Skopje has experienced remarkable UHI effects. To investigate the roles of built-up and green areas in a surface UHI, this article uses satellite data from Landsat ETM+ to analyse the land surface temperature and high-resolution Planet Scope DOVE data to analyse built-up and green areas. For geostatistical analyses, seventeen randomly selected subareas in Skopje were used. The results show a significant correlation between the UHI and built-up areas, and strong correlation between green areas and areas not affected by the UHI, indicating that the UHI effect can be significantly weakened with additional green areas. One of the significant findings in the study is the ideal proportion of built-up (40%) and green areas (60%), where the UHI effect is weak, or in some cases prevented. For future studies, investigating other factors that may contribute to the UHI phenomenon is suggested.

Synergistic Interactions between Urban Heat Islands and Heat Waves: The Impact in Cities Is Larger than the Sum of Its Parts

2013 ◽  
Vol 52 (9) ◽  
pp. 2051-2064 ◽  
Author(s):  
Dan Li ◽  
Elie Bou-Zeid
Keyword(s):  
Urban Heat Island ◽  
Rural Areas ◽  
Urban Areas ◽  
Heat Waves ◽  
Mitigation Strategies ◽  
Urban Heat Islands ◽  
Heat Island ◽  
Heat Islands ◽  
Urban Heat ◽  
The Impact

AbstractCities are well known to be hotter than the rural areas that surround them; this phenomenon is called the urban heat island. Heat waves are excessively hot periods during which the air temperatures of both urban and rural areas increase significantly. However, whether urban and rural temperatures respond in the same way to heat waves remains a critical unanswered question. In this study, a combination of observational and modeling analyses indicates synergies between urban heat islands and heat waves. That is, not only do heat waves increase the ambient temperatures, but they also intensify the difference between urban and rural temperatures. As a result, the added heat stress in cities will be even higher than the sum of the background urban heat island effect and the heat wave effect. Results presented here also attribute this added impact of heat waves on urban areas to the lack of surface moisture in urban areas and the low wind speed associated with heat waves. Given that heat waves are projected to become more frequent and that urban populations are substantially increasing, these findings underline the serious heat-related health risks facing urban residents in the twenty-first century. Adaptation and mitigation strategies will require joint efforts to reinvent the city, allowing for more green spaces and lesser disruption of the natural water cycle.

scholarly journals Urban Thermal Environment and Heat Island in Ho Chi Minh City, Vietnam from Remote Sensing Data

2017 ◽  
Author(s):  
Van Tran Thi ◽  
Bao Ha Duong Xuan ◽  
Mai Nguyen Thi Tuyet
Keyword(s):  
Surface Temperature ◽  
Urban Heat Island ◽  
Rural Areas ◽  
Land Surface ◽  
Urban Areas ◽  
Ho Chi Minh City ◽  
Heat Island ◽  
Urban Heat ◽  
Surface Urban Heat Island ◽  
The Impact

In urban area, one of the great problem is the rise of temperature, which leads to form the urban heat island effect. This paper refers to the trend of the urban surface temperature extracted from the Landsat images from which to consider changes in the formation of surface urban heat island for the north of Ho Chi Minh city in period 1995-2015. Research has identified land surface temperature from thermal infrared band, according to the ability of the surface emission based on characteristics of normalized difference vegetation index NDVI. The results showed that temperature fluctuated over the city with a growing trend and the gradual expansion of the area of the high-temperature zone towards the suburbs. Within 20 years, the trend of the formation of surface urban heat island with two typical locations showed a clear difference between the surface temperature of urban areas and rural areas with space expansion of heat island in 4 times in 2015 compared to 1995. An extreme heat island located in the inner city has an area of approximately 18% compared to the total area of the region. Since then, the solution to reduce the impact of urban heat island has been proposed, in order to protect the urban environment and the lives of residents in Ho Chi Minh City becoming better

scholarly journals Reduction in Human Activity can Enhance the Urban Heat Island: Insights from the COVID-19 Lockdown

2021 ◽  
Author(s):  
TC Chakraborty ◽  
Chandan Sarangi ◽  
Xuhui Lee
Keyword(s):  
Urban Heat Island ◽  
Human Activity ◽  
Rural Areas ◽  
Agricultural Activity ◽  
Heat Island ◽  
Available Energy ◽  
Winter Crop ◽  
Urban Heat ◽  
Surface Urban Heat Island ◽  
Surface Vegetation

The COVID-19 lockdowns drastically reduced human activity, emulating a controlled experiment on human-land-atmosphere coupling. Here, using a fusion of satellite and reanalysis products, we examine this coupling during the lockdown in the Indo-Gangetic Basin, one of the world’s most populated and polluted regions. During the lockdown, the reduction (>10%) in columnar air pollution, expected to increase incoming solar radiation, was counteracted by a ~30% enhancement in cloud cover, causing little change in available energy at the surface. More importantly, the delay in winter crop harvesting increased surface vegetation cover, causing almost half the regional cooling (of -3.9 K) via evapotranspiration. Since this cooling was higher for rural areas, the daytime surface urban heat island (SUHI) intensity increased (by 0.20 to 0.41 K) during a period of reduced human activity. Our study provides strong observational evidence of the influence of agricultural activity on both urban and rural climate in this region.

scholarly journals Surface Urban Heat Island Assessment of a Cold Desert City: A Case Study over the Isfahan Metropolitan Area of Iran

Atmosphere ◽  
2021 ◽  
Vol 12 (10) ◽  
pp. 1368
Author(s):  
Alireza Karimi ◽  
Pir Mohammad ◽  
Sadaf Gachkar ◽  
Darya Gachkar ◽  
Antonio García-Martínez ◽  
...  
Keyword(s):  
Urban Heat Island ◽  
Metropolitan Area ◽  
Negative Correlation ◽  
Land Surface ◽  
Vegetation Index ◽  
Urban Heat Islands ◽  
Heat Island ◽  
Cold Desert ◽  
Urban Heat ◽  
Surface Urban Heat Island

This study investigates the diurnal, seasonal, monthly and temporal variation of land surface temperature (LST) and surface urban heat island intensity (SUHII) over the Isfahan metropolitan area, Iran, during 2003–2019 using MODIS data. It also examines the driving factors of SUHII like cropland, built-up areas (BI), the urban–rural difference in enhanced vegetation index (ΔEVI), evapotranspiration (ΔET), and white sky albedo (ΔWSA). The results reveal the presence of urban cool islands during the daytime and urban heat islands at night. The maximum SUHII was observed at 22:30 pm, while the minimum was at 10:30 am. The summer months (June to September) show higher SUHII compared to the winter months (February to May). The daytime SUHII demonstrates a robust positive correlation with cropland and ΔWSA, and a negative correlation with ΔET, ΔEVI, and BI. The nighttime SUHII displays a negative correlation with ΔET and ΔEVI.

scholarly journals Determining the Boundary and Probability of Surface Urban Heat Island Footprint Based on a Logistic Model

2019 ◽  
Vol 11 (11) ◽  
pp. 1368 ◽  
Author(s):  
Zhi Qiao ◽  
Chen Wu ◽  
Dongqi Zhao ◽  
Xinliang Xu ◽  
Jilin Yang ◽  
...  
Keyword(s):  
Urban Heat Island ◽  
Land Surface ◽  
Landscape Heterogeneity ◽  
Remote Sensing Data ◽  
Precise Determination ◽  
Heat Island ◽  
Rural Regions ◽  
Urban Heat ◽  
Surface Urban Heat Island ◽  
Moderate Resolution Imaging Spectroradiometer

Studies of the spatial extent of surface urban heat island (SUHI or UHISurf) effects require precise determination of the footprint (FP) boundary. Currently available methods overestimate or underestimate the SUHI FP boundary, and can even alter its morphology, due to theoretical limitations on the ability of their algorithms to accurately determine the impacts of the shape, topography, and landscape heterogeneity of the city. The key to determining the FP boundary is identifying background temperatures in reference rural regions. Due to the instability of remote sensing data, these background temperatures should be determined automatically rather than manually, to eliminate artificial bias. To address this need, we developed an algorithm that adequately represents the decay of land surface temperature (LST) from the urban center to surrounding rural regions, and automatically calculates thresholds for reference rural LSTs in all directions based on a logistic curve. In this study, we applied this algorithm with data from the Aqua Moderate Resolution Imaging Spectroradiometer (Aqua/MODIS) 8-day level 3 (L3) LST global grid product to delineate precise SUHI FPs for the Beijing metropolitan area during the summers of 2004–2018 and determine the interannual and diurnal variations in FP boundaries and their relationship with SUHI intensity.

Sign in / Sign up

Export Citation Format

Share Document