scholarly journals Cost-Optimal Net Zero Energy Communities

2020 ◽  
Vol 12 (6) ◽  
pp. 2432 ◽  
Author(s):  
Shabtai Isaac ◽  
Slava Shubin ◽  
Gad Rabinowitz

The objective of this research is to study the cost of Net Zero Energy (NZE) communities of different urban scales and densities, while taking into consideration the local climate and the type of buildings in the community. A comprehensive model was developed for this purpose, with which the cost-optimal configuration of renewable energy-related technologies for an NZE community can be identified. To validate the model, data from two case studies that differed in their climate and building types were used. The results of this study contribute to a better understanding of the implications of NZE requirements for urban planning. An increase in the scale of a community was found to reduce energy costs, up to a certain point. Urban density, on the other hand, was found to have a more complex impact on costs, which depends on the local climate of the community and the subsequent energy demand. This underlines the importance of addressing the technological design of energy systems at the initial stage of the urban planning of energy-efficient communities, before the urban density, the unbuilt areas and the building types are set.

Author(s):  
George A. Mertz ◽  
Gregory S. Raffio ◽  
Kelly Kissock

Environmental and resource limitations provide increased motivation for design of net-zero energy or net-zero CO2 buildings. The optimum building design will have the lowest lifecycle cost. This paper describes a method of performing and comparing lifecycle costs for standard, CO2-neutral and net-zero energy buildings. Costs of source energy are calculated based on the cost of photovoltaic systems, tradable renewable certificates, CO2 credits and conventional energy. Building energy simulation is used to determine building energy use. A case study is conducted on a proposed net-zero energy house. The paper identifies the least-cost net-zero energy house, the least-cost CO2 neutral house, and the overall least-cost house. The methodology can be generalized to different climates and buildings. The method and results may be of interest to builders, developers, city planners, or organizations managing multiple buildings.


2009 ◽  
Vol 4 (4) ◽  
pp. 93-100 ◽  
Author(s):  
Mira Heinze ◽  
Karsten Voss

Zero energy consumption. The goal sounds simple and is presented excessively in variations all over the world. Energy and environmental politics demand zero consumption as a long-term goal, marketing has discovered the concept and first buildings and settlements aiming at balanced energy or emission budgets have been constructed. As an example, the German Federal Government specifies in its fifth energy research programme (2005): For new buildings, the goal is to reduce the primary energy demand, i.e. the energy demand for heating, domestic hot water, ventilation, air-conditioning, lighting and auxiliary energy, again by half compared to the current state of the art. The long-term goal is zero-emission buildings. England and the USA aim for zero carbon developments and net-zero energy buildings (DOE, 2009) in political programmes. The Vatican accepted the offer of climatic “indulgence”—and thus became the first country in the world to completely compensate its carbon emission (Spiegel online, 2007). Megaprojects in the growth regions of the Arabian Gulf and China advertise with a CO2-neutral balance. A Zero Carbon Community is to be created in Masdar, Abu Dhabi (Foster, 2007), and the first Chinese carbon-neutral ecocity was planned for Dongtan, Shanghai (Pearce, 2009). Not only to aid international communication, but also to further the processes required to solve energy-related problems, it is essential that key words, central concepts, their usage and their relationships be clarified. This article intends to contribute to this clarification based on the monitored example of a solar estate. Net zero energy building, equilibrium building, carbon neutral city—the accounting method varies, depending on motivation and point of view. If the focus is on finite and scarce resources, energy is the currency; CO2-equivalent emissions are considered if global warming and public health is the issue; the cost of energy is what concerns a tenant paying for heating and electricity. A balance in one set of units can be converted to another, but the conversion factors often also shift the balance point. Energy will be used as the reference quantity in the following article, which prevents confusion with non-energy measures (e.g. carbon credits for forestry) and avoids the nuclear power debate, in which nuclear power is partly calculated as being CO2 neutral. The diversity of concepts is an indicator that a scientifically based methodology is still lacking, though initial publications focus hereon (Pless et al. 2009). Since October 2008, a group of experts in the International Energy Agency has been addressing this issue under the heading, Towards Net Zero Energy Solar Buildings (Riley et al. 2008). The goal is to document and analyse outstanding examples that are close to being net zero-energy buildings, and while doing so, to develop the methodology and tools for working with such buildings. The Chair of Technical Building Services, University of Wuppertal, is co-ordinating the methodological work. The zero-energy approach—still under construction—will here be presented using a solar estate as an illustration.


Author(s):  
Owen Betharte ◽  
Hamidreza Najafi ◽  
Troy Nguyen

The growing world-wide energy demand and environmental considerations have attracted immense attention in building energy efficiency. Climate zone plays a major role in the process of decision making for energy efficiency projects. In the present paper, an office building located in Melbourne, FL is considered. The building is built in 1961 and the goal is to identify and prioritize the potential energy saving opportunities and retrofit the existing building into a Net-Zero Energy Building (NZEB). An energy assessment is performed and a baseline model is developed using eQUEST to simulate the energy performance of the building. Several possible energy efficiency improvement scenarios are considered and assessed through simulation including improving insulation on the walls and roof, replacing HVAC units and upgrade their control strategies, use of high efficiency lighting, and more. Selected energy efficiency improvement recommendations are implemented on the building model to achieve the lowest energy consumption. It is considered that photovoltaic (PV) panels will be used to supply the energy demand of the building. Simulations are also performed to determine the number of required PV panels and associated cost of the system is estimated. The results from this paper can help with the decision making regarding retrofit projects for NZEB in humid subtropical climate.


Author(s):  
Philip Odonkor ◽  
Kemper Lewis ◽  
Jin Wen ◽  
Teresa Wu

Traditionally viewed as mere energy consumers, buildings have in recent years adapted, capitalizing on smart grid technologies and distributed energy resources to not only efficiently use energy, but to also output energy. This has led to the development of net-zero energy buildings, a concept which encapsulates the synergy of energy efficient buildings, smart grids, and renewable energy utilization to reach a balanced energy budget over an annual cycle. This work looks to further expand on this idea, moving beyond just individual buildings and considering net-zero at a community scale. We hypothesize that applying net-zero concepts to building communities, also known as building clusters, instead of individual buildings will result in cost effective building systems which in turn will be resilient to power disruption. To this end, this paper develops an intelligent energy optimization algorithm for demand side energy management, taking into account a multitude of factors affecting cost including comfort, energy price, Heating, Ventilation, and Air Conditioning (HVAC) system, energy storage, weather, and on-site renewable resources. A bi-level operation decision framework is presented to study the energy tradeoffs within the building cluster, with individual building energy optimization on one level and an overall net-zero energy optimization handled on the next level. The experimental results demonstrate that the proposed approach is capable of significantly shifting demand, and when viable, reducing the total energy demand within net-zero building clusters. Furthermore, the optimization framework is capable of deriving Pareto solutions for the cluster which provide valuable insight for determining suitable energy strategies.


2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Jay Patel

Buildings and Residential sectors are amongst the major energy consumers of Australia. But the maximum portion of the energy consumed by these buildings is lost due to construction, design, or use of appliances. A significant amount of energy can be saved through this sector, which will not only reduce energy demand, it would further remove a major load from the National Grid. This study assessed a building in the residential sector of Australia and proposed how the use of Passive, Active techniques and adoption of the NZEB concept can help save energy consumption of residential houses. Different techniques and their implementation in the building were performed through both qualitative and quantitative analysis.  The results obtained from the study show the house load of the designed building, a solar system that can take up the entire load, its financial assessment, and how the use of energy-efficient appliances and the use of passive techniques can result in improvement of energy efficiency.


2018 ◽  
Vol 11 (1) ◽  
pp. 159 ◽  
Author(s):  
Sakdirat Kaewunruen ◽  
Panrawee Rungskunroch ◽  
Joshua Welsh

With buildings around the world accounting for nearly one-third of global energy demand and the availability of fossil fuels constantly on the decline, there is a need to ensure that this energy demand is efficiently and effectively managed using renewable energy now more than ever. Most research and case studies have focused on energy efficiency of ‘new’ buildings. In this study, both technical and financial viability of Net Zero Energy Buildings (NZEB) for ‘existing’ buildings will be highlighted. A rigorous review of open literatures concerning seven principal areas that in themselves define the concept of NZEB building is carried out. In practice, a suitable option of the NZEB solutions is needed for the evaluation and improvement for a specific geographical area. The evaluation and improvement has been carried out using a novel hierarchy-flow chart coupled with a Building Information Model (BIM). This BIM or digital twin is then used to thoroughly visualize each option, promote collaboration among stakeholders, and accurately estimate associated costs and associated technical issues encountered with producing an NZEB in a pre-determined location. This paper also provides a future model for NZEB applications in existing buildings, which applies renewable technologies to the building by aiming to identify ultimate benefit of the building especially in terms of effectiveness and efficiency in energy consumption. It is revealed that the digital twin is proven to be feasible for all renewable technologies applied on the NZEB buildings. Based on the case study in the UK, it can be affirmed that the suitable NZEB solution for an existing building can achieve the 23 year return period.


2021 ◽  
pp. 22-25
Author(s):  
Rohit Malviya ◽  
Shravan Vishwakarma

Net-zero energy buildings (NZEBs) were proposed as a viable solution for reducing building energy usage and contamination emission levels. To achieve the desired specific objective, the setups and abilities of the deployed RES in NZEBs should be carefully chosen. The goal of this project is to develop an optimized design approach for a zero-energy building that takes into account the building's usage of energy. The continuous expansion of international energy demand as a result of industrialization and growing populations is presently a major source of concern.


Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5577
Author(s):  
Marc Richter ◽  
Pio Lombardi ◽  
Bartlomiej Arendarski ◽  
André Naumann ◽  
Andreas Hoepfner ◽  
...  

The power system is changing towards a decarbonized one. The Kyoto protocol and the Paris climate agreement have prompted many nations to approve energy policies based on volatile renewable energy sources (RESs). However, the integration into the grid of the power generated by RESs as well as the electrification of the heating, gas and transportation sectors is becoming a huge challenge. Planning industrial and tertiary sites as net-zero energy systems (NZESs) might contribute to advance the solutions of fully integrating volatile RESs into the power system. This study aims to point out the importance of planning large energy consumer sites such as NZESs, and to depict a holistic modeling approach for this. The methodology is based on a multi-layer approach, which focuses on on-site power generation by RESs, on the improvement of energy efficiency, and on the increase of system flexibility. A qualitative case study has been conducted. It considers the planning of a Net-Zero Energy Data Center located in Germany. Results point out that new interdisciplinary and in particular social analysis methods are necessary. They might be used for accelerating the decision making process during the planning of RES-based on-site power generation systems. Besides, for computation and cooling systems, new technologies that are continuously emerging in the market should be taken into account. If well designed, they contribute to significantly decrease the whole energy demand of data center. Finally, optimal sizing of energy storage systems (electric and thermal) as well as an expedient choice of performance indicators to evaluate technology options are identified as the key factor for decreasing the external energy demand of tertiary sites, such as data center.


Author(s):  
N. Fumo ◽  
V. Bortone ◽  
J. C. Zambrano

The concept of Net-Zero Energy in building refers to a building which has an annual balance of energy flow at the utility meter of zero. The concept implies that the building may consume energy from an external provider at times in order to satisfy the building demands, but at other times it must produce enough on-site energy to compensate for this energy. The use of renewable energy technologies is implicit as the source of energy to compensate for any energy used from an external provider. Solar photovoltaic is a proved technology for achieving Net-Zero Energy building but economic factors has limited its broad use. The design stage of a solar photovoltaic project is critical to make a project feasible. In the design stage, the equipment sizing must be optimized in order to reduce the initial capital cost and, therefore, improve the economics of the project. For houses, which is the focus of this paper, a stand-alone solar photovoltaic system must supply the house energy demand at all times since it is not connected to the electric grid. As a means to size the system, data of solar energy availability must be used to ensure that the system will provide enough energy to satisfy the energy demand as well as provide energy to charge the batteries that will provide the energy required when the solar energy is not available. In this paper, a methodology to optimize the size of the photovoltaic array and the battery bank is proposed. The methodology accounts for Typical Meteorological Year data (TMY3) to ensure that the system, based on accepted statistical data, will be able to satisfy the energy demand at all times. An example that uses energy demand data obtained from the simulation of a house using the software EnergyGauge is used to illustrate the implementation of the methodology.


2016 ◽  
Vol 820 ◽  
pp. 146-151
Author(s):  
Peter Buday ◽  
Rastislav Ingeli

Rising living standards have led to a significant increase in building energy consumption over the past few decades. Therefore, along with sustainability requirements, it is essential to establish an effective and precise energy demand model for new buildings. In principle, energy demand in buildings is very important plan to pre-calculate and that is one of the reasons why it is supposed to be precalculated for most of the sustainable buildings. Net Zero-Energy Buildings (NZEBs) have received increased attention in recent years as a result of constant concerns about energy supply constraints, decreasing energy resources, increasing energy costs and the rising impact of greenhouse gases on world climate. Promoting whole building strategies that employ passive measures together with energy efficient systems and technologies using renewable energy became a European political strategy following the publication of the Energy Performance of Buildings Directive recast in May 2010 by the European Parliament and Council. In Net Zero-Energy Buildings (NZEB) is necessary to calculate all factors that influence on energy need for heating. However what is still underestimated is the consideration that the energy performance of any building component is the result not only of its thermophysical properties but also of how are all the components installed and connected to each other. Thermal bridging in buildings can contribute to a multitude of problems. One of the details that create thermal bridges is balcony. This paper is focused to calculate Balcony systems (isokorb) impact on energy need for heating and economic valuation of balcony systems in residential building.


Sign in / Sign up

Export Citation Format

Share Document