scholarly journals Post-Emergence Herbicides for Effective Weed Management, Enhanced Wheat Productivity, Profitability and Quality in North-Western Himalayas: A ‘Participatory-Mode’ Technology Development and Dissemination

2021 ◽  
Vol 13 (10) ◽  
pp. 5425
Author(s):  
Anil K. Choudhary ◽  
D.S. Yadav ◽  
Pankaj Sood ◽  
Shakuntla Rahi ◽  
Kalpana Arya ◽  
...  
Keyword(s):  
Technology Adoption ◽  
Weed Control ◽  
Weed Management ◽  
Block Design ◽  
Water Productivity ◽  
Rural Livelihoods ◽  
Western Himalayas ◽  
Net Income ◽  
Adoption Rate ◽  
North Western

‘Participatory-mode’ adaptive research was conducted in wheat in north-western Himalayas (NWH) during 2008–2014 to develop an improved chemical weed management (ICWM) technology. First of all, two years ‘on-farm experimentation’ was performed in a randomized block design at 10 locations in NWH using seven treatments (Clodinafop @ 60 g a.i./ha (Clod); Clod followed by 2,4-D (Na-salt) @ 1.0 kg a.i./ha (Clod-fb-D); Isoproturon 75 WP @ 1.0 kg a.i./ha (Iso); Iso + D; Sulfosulfuron 75% WG @ 25 g a.i./ha + Metsulfuron 5% WG @ 2 g a.i./ha (Sulf + Met); weed-free-check; and un-weeded-check). In this study, the post-emergence application of Sulf + Met reported the lowest weed-index and NPK depletion by weeds with higher weed control efficiency (86.4%), weed control index (81.1%) and herbicide efficiency index (2.62) over other herbicides. Sulf + Met exhibited significantly higher wheat productivity (3.57 t/ha), protein yield, net-returns and water-productivity, which was followed by Iso + D and Clod-fb-D, all of which remained statistically at par with each other. An impact assessment of intensive technology-transfer programme (2008–2014) revealed a higher technology adoption rate (71–98%) of ICWM leading to higher wheat productivity (~22%) and net income gains (2.8–26.4%) in NWH. Overall, Sulf + Met proved highly effective against mixed weed flora in wheat to boost wheat productivity, profitability, quality and water productivity in addition to a higher technology adoption rate and NIGs to transform rural livelihoods in NWH.

Bio-efficacy of post emergence herbicides in boro rice nursery as well as main field and their residual effects on non-target microorganisms

2020 ◽  
Vol 57 (3) ◽  
pp. 199-210
Author(s):  
Rajib Kundu ◽  
Mousumi Mondal ◽  
Sourav Garai ◽  
Ramyajit Mondal ◽  
Ratneswar Poddar
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Field Experiments ◽  
Block Design ◽  
Resistance Index ◽  
Residual Effects ◽  
Cost Ratio ◽  
Main Field ◽  
Weed Species ◽  
Similar Treatment

Field experiments were conducted at research farm of Bidhan Chandra Krishi Viswavidyalaya, Kalyani, West Bengal, India (22°97' N latitude and 88°44' E longitude, 9.75 m above mean sea level) under natural weed infestations in boro season rice (nursery bed as well as main field) during 2017-18 and 2018-19 to evaluate the herbicidal effects on weed floras, yield, non-target soil organisms to optimize the herbicide use for sustainable rice-production. Seven weed control treatments including three doses of bispyribac-sodium 10% SC (150,200, and 250 ml ha-1), two doses of fenoxaprop-p-ethyl 9.3% EC (500 and 625 ml ha-1), one weed free and weedy check were laid out in a randomized complete block design, replicated thrice. Among the tested herbicides, bispyribac-sodium with its highest dose (250 ml ha-1) resulted in maximum weed control efficiency, treatment efficiency index and crop resistance index irrespective of weed species and dates of observation in both nursery as well as main field. Similar treatment also revealed maximum grain yield (5.20 t ha-1), which was 38.38% higher than control, closely followed by Fenoxaprop-p-ethyl (625 ml ha-1) had high efficacy against grasses, sedge and broadleaf weed flora. Maximum net return (Rs. 48765 ha-1) and benefit cost ratio (1.72) were obtained from the treatment which received bispyribac-sodium @ 250 ml ha-1. Based on overall performance, the bispyribac-sodium (250 ml ha-1) may be considered as the best herbicide treatment for weed management in transplanted rice as well as nursery bed.

scholarly journals Spring-planted cover crops for weed control in soybean

2021 ◽  
pp. 1-8
Author(s):  
Katja Koehler-Cole ◽  
Christopher A. Proctor ◽  
Roger W. Elmore ◽  
David A. Wedin
Keyword(s):  
Weed Control ◽  
Biomass Production ◽  
Cover Crops ◽  
Weed Management ◽  
Block Design ◽  
Weed Suppression ◽  
Crop Species ◽  
Cold Temperatures ◽  
Weed Biomass ◽  
Small Grains

Abstract Replacing tillage with cover crops (CC) for weed management in corn (Zea mays L.)-soybean [Glycine max (L.) Merr.] systems with mechanical weed control has many soil health benefits but in the western Corn Belt, CC establishment after harvest is hampered by cold temperatures, limited labor and few compatible CC species. Spring-planted CC may be an alternative, but information is lacking on suitable CC species. Our objective was to evaluate four spring-planted CC with respect to biomass production and weed suppression, concurrent with CC growth and post-termination. Cover crop species tested were oat (Avena sativa L.), barley (Hordeum vulgare L.), brown mustard [Brassica juncea (L.) Czern.] and yellow mustard (Brassica hirta Moench). They were compared to no-CC treatments that were either tilled pre- and post-planting of soybean (no-CC tilled) or not tilled at all (no-CC weedy). CC were planted in late March to early April, terminated 52–59 days later using an undercutter, and soybean was planted within a week. The experiment had a randomized complete block design with four replications and was repeated for 3 years. Mustards and small grains produced similar amounts of biomass (1.54 Mg ha−1) but mustard biomass production was more consistent (0.85–2.72 Mg ha−1) than that of the small grains (0.35–3.81 Mg ha−1). Relative to the no-CC weedy treatment, mustards suppressed concurrent weed biomass in two out of 3 years, by 31–97%, and small grains suppressed concurrent weed biomass in only 1 year, by 98%. Six weeks after soybean planting, small grains suppressed weed biomass in one out of 3 years, by 79% relative to the no-CC weedy treatment, but mustards did not provide significant weed suppression. The no-CC tilled treatment suppressed weeds each year relative to the no-CC weedy treatment, on average 87%. The ineffective weed control by CC reduced soybean biomass by about 50% six weeks after planting. While spring-planted CC have the potential for pre-plant weed control, they do not provide adequate early season weed suppression for soybean.

Establishment Techniques on Yield and Economics of Pigeon Pea [Cajanus cajan (L.)] in North Western Zone of Tamil Nadu

2020 ◽  
Author(s):  
C. Sivakumar ◽  
A. Krishnaveni ◽  
M. Pandiyan ◽  
N. Tamilselvan
Keyword(s):  
Cajanus Cajan ◽  
Tamil Nadu ◽  
Field Experiments ◽  
Block Design ◽  
Pigeon Pea ◽  
Research Station ◽  
Net Income ◽  
Randomized Block Design ◽  
Western Zone ◽  
North Western

Field experiments were conducted to study the effect of establishment techniques on yield and economics of red gram [Cajanus cajan (L.)] under irrigated condition at Regional Research Station, Tamil Nadu Agricultural University, Paiyur - 635 112,Tamil Nadu, India during Kharif season of 2013-14 and 2014-15 respectively in randomized block design with four replications. The treatments are line sowing/dibbling of seeds, sowing behind the country plough, sowing in polybag and transplanting at 25 and 40 DAS, sowing in portrays and transplanting in 25 and 40 DAS. The redgram variety LRG 41 was used for study. The results revealed that, dibbling of seeds in lines recorded higher grain yield of 2351 kg ha-1, net income of Rs.99495/- and B:C ratio of 3.39. Thus, dibbling of seeds in lines recorded 6% higher over sowing in poly bag and transplanting at 25 DAS and 27% higher yield over sowing behind the country plough. Considering yield and economics, line sowing seems to better option for the farmers followed by sowing in polybags and transplanted in 25 DAS. Under transplanted situation, transplanting of seedlings at 30 DAS was more suitable where the monsoon was delayed for 30 to 45 days under rainfed situation. 

Maize MAIZE YIELD AS AFFECTED BY METHODS OF TILLAGE AND WEED MANAGEMEMNT

2021 ◽  
Vol 27 (1) ◽  
pp. 51-66
Author(s):  
Haseeb Ahmad
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Weed Management ◽  
Management Practices ◽  
Block Design ◽  
Dry Weight ◽  
Maize Yield ◽  
Control Methods ◽  
Fresh Weight ◽  
Maize Crop

An experiment entitled: Maize yield as affected by methods of tillage and weed control methods was conducted at Agronomy Research Farms, The University of Agriculture Peshawar during summer 2016. The study was conducted in randomized complete block design (RCBD) with split plot arrangement having four replications. Tillage practices 1) Chisel plough + rotavator 2) Mouldboard plough + rotavator 3) Cultivator + rotavator and 4) Rotavator were assigned to main plots. Weed management practices included 1) Control, 2) Hoeing 15 days after sowing 3) Hoeing 15 and 30 days after sowing 4) Hoeing 15, 30 and 45 days after sowing, and 4) Herbicide (nicosulfuron) were kept into the subplots. The results revealed that chisel plough + rotavator has significantly reduced weeds m-2 (122, 101 and 125 weeds m-2), weeds fresh weight (19.73 g m-2, 116.35 g m-2 and 252.56 g m-2) and weeds dry weight (6.83 g m-2, 38.69 g m-2 and 80.61 g m-2) at 30, 45 and 60 days after sowing, respectively. The operation of chisel plough + rotavator has produced tallest plants (221.22 cm) with maximum grain rows ear-1 (16), grain yield (3586 kg ha-1) and shelling percentage (78.14%). Among weed control methods, hoeing 15, 30 and 45 days after sowing revealed maximum plant height (226.41 cm), grain rows ear-1 (16), grain yield (3604 kg ha-1) and shelling percentage (79.11%). All weed control methods have showed significant reduction in weeds m-2, weeds fresh weight and weeds dry weight. Interaction was also found significant for weeds m-2 at 60 DAS and grain yield of maize. Lowest weeds (56 weeds m-2) at 60 DAS and highest grain yield (4569 kg ha-1) was recorded when seedbed was prepared with chisel plough + rotavator with 3 hoeings (hoeing 15, 30 and 45 days after sowing). It is concluded that treatment of chisel plough + rotavator and hoeing 15, 30 and 45 days after sowing has significantly produced maximum grain yield of maize crop.

Optimizing the Application Time of Pre-emergence Herbicide Pendimethalin and Oxyfluorfen Application for Effective Weed Management in Irrigated Blackgram (Vigna mungo L.) and Its Residue Persistence

2021 ◽  
Author(s):  
S. Selvakumar ◽  
R. Ajaykumar ◽  
A. Ammaiyappan
Keyword(s):  
Field Experiment ◽  
Weed Control ◽  
Weed Management ◽  
Block Design ◽  
Vigna Mungo ◽  
Application Time ◽  
Herbicide Application ◽  
Control Efficiency ◽  
Randomized Block Design ◽  
Weed Control Efficiency

Background: Time of pre-emergence herbicide application is an important factor that decides the efficiency of herbicide. If the pre-emergence herbicide is not applied at appropriate time, it may cause ineffective weed control or toxicity to crops. With this background, a field experiment was conducted at TNAU, Madurai to optimize the time of pre-emergence herbicides namely pendimethalin and oxyfluorfen application for effective weed management in irrigated blackgram. Methods: The experiment was laid out in randomized block design with three replication. Treatments were application of pendimethalin at 0.75 kg ha-1 and oxyfluorfen at 0.2 kg ha-1 on 1, 2, 3, 4 days after sowing, weed free check and unweeded check. Result: Results of the study revealed that oxyfluorfen gave maximum weed control efficiency as compared to pendimethalin, but toxicity to the crop was observed when oxyfluorfen was sprayed after 2 days of sowing. Yield and economics were achieved higher with application of 0.75 kg ha-1 of pendimethalin at 2 DAS, which was on par with application of 0.2 kg ha-1 of oxyfluorfen at 1 DAS due to lesser toxicity. Application of 0.75 kg ha-1 of pendimethalin and 0.2 kg ha-1 of oxyfluorfen didn’t leave any herbicide residue after harvest. Hence, application of 0.75 kg ha-1 of pendimethalin at 2 DAS and 0.2 kg ha-1 of oxyfluorfen at 1 DAS can be recommended for effective weed management in irrigated balckgram.

Effectiveness of different weed control practices in onion (Allium cepa L.) crop

2020 ◽  
pp. 47-51
Author(s):  
Muhammad Nafees ◽  
Ishtiaq Ahmad ◽  
Maryam ◽  
Muhammad Ahsan ◽  
Muhammad Rashid Shaheen ◽  
...  
Keyword(s):  
Plant Height ◽  
Weed Control ◽  
Allium Cepa ◽  
Weed Management ◽  
Block Design ◽  
Yield Reduction ◽  
Weed Biomass ◽  
Allium Cepa L ◽  
Randomized Complete Block Design ◽  
Number Of Leaves

Onion (Allium cepa L.) is one of the most important vegetables in family Alliaceae, which is cultivated worldwide. In onion, weeds are among one of the major concerns which cause its yield reduction. The present study was designed to assess the effectiveness of different methods for weed control in onion. In this study, five treatments were selected including control, black polythene mulch sheet, white polythene mulch sheet, Dual Gold spray @ 9.0 mL L-1 and Preact spray @ 7.5 mL L-1 to control weeds. The weedicides were applied as pre-emergence sprays before transplanting the seedlings. The experiment was laid out in Randomized Complete Block Design with three replications. From the results, it was concluded that there were significant differences among the studied weed control treatments. Among the five treatments, greater plant height (33.0 cm), number of leaves per plant (8), bulb diameter (4.7 cm) and bulb weight (73 g) were observed in the ridges covered with black mulch sheet. However, the minimum weed biomass (fresh and dry) was recorded in black mulch sheet and Preact pre-emergence weedicide spray (140 and 80 g in both). Thus, black polythene sheet as mulching material was found better option for weed management in onion fields.

scholarly journals Effects of weed management and plant arrangements on yield index of sweet sorghum

2019 ◽  
Vol 35 (4) ◽  
Author(s):  
Ronaldo Matias Reis ◽  
Matheus Souza Freitas ◽  
Daniel Valadão Silva ◽  
Gustavo Antônio Mendes Pereira ◽  
Ana Beatriz Rocha de Jesus Passos ◽  
...  
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Sweet Sorghum ◽  
Control Method ◽  
Block Design ◽  
Stem Diameter ◽  
Soluble Solids ◽  
Fresh Matter ◽  
Randomized Block Design ◽  
And Control

Sweet sorghum is currently an important alternative for ethanol production in sugar cane off-season. In this study was to evaluate the effects of plant arrangements and the application of atrazine and S-metolachlor on growth and productivity of sweet sorghum. An experiment was conducted in randomized block design and, arranged in split plots with four repetitions. Plots consisted of spacing (0.25 m, 0.45 m 0.45-0.45-0.90 m) and sub-plots of weed control methods - atrazine (2000 g ha-1), atrazine + S-metolachlor (2000 + 720 g ha-1), atrazine + S-metolachlor (2000 + 960 g ha-1), atrazine + S-metolachlor (2000 + 1200 g ha-1), atrazine + S-metolachlor (2000 + 1440 g ha-1). Besides that, manual hoeing control was added. The intoxication of sorghum plants and weed control was evaluated at 7, 14 e 28 days after herbicides application (DAA). Plant height, stem diameter, total fresh matter, juice mass and total soluble solids (°Brix) were evaluated at 120 days after crop emergence (DAE).  There was no interaction between the factors spacings and control method for variables total matter fresh (TMF), height (H), stem diameter (D), juice mass (JM), and Brix. Application of the mixture (atrazine + S-metolachlor) in the highest doses reduced total fresh matter and °Brix. The spacing of 0.25 m provided the highest productivity of fresh matter, juice mass and increased the °Brix. The application of mixture (atrazine + S-metolachlor) controlled 90% of the weeds at 28 days after application. The increasing in doses of S-metolachlor elevates the intoxication in sorghum plants. The mixture (atrazine + S-metolachlor) has a potential for use in weed control in sweet sorghum, but at doses below 960 g ha-1 of S-metolachlor. metolachlor.

scholarly journals Bioefficacy, Phytotoxicity and Economics of Post-emergence Herbicides in Moth Bean (Vigna aconitifolia) in Hot Arid Regions

2021 ◽  
Author(s):  
N.K. Jat ◽  
D.V. Singh
Keyword(s):  
Weed Control ◽  
Seed Yield ◽  
Weed Management ◽  
Arid Regions ◽  
Block Design ◽  
Resistance Index ◽  
Moth Bean ◽  
Herbicide Treatments ◽  
Hand Weeding ◽  
Clodinafop Propargyl

Background: Weed infestation is the major cause of yield loss to Kharif pulses in arid regions. Post-emergence herbicide application is a promising weed management option for pulses in these areas. Therefore, the current study was aimed to find an effective and economic post-emergence herbicide molecule for weed control in moth bean. Methods: A field experiment was conducted during 2017-2019 with different herbicides, hand weeding, weed-free and unweededs in Kharif mung bean in a randomized complete block design with three replications. Result: Among the herbicide treatments, post-emergence application of propaquizafop + imazethapyr @ 125 g a.i. ha-1 being statistically at par with clodinafop-propargyl + sodium acifluorfen @ 312.5 g a.i. ha-1 and hand weeding recorded the highest reduction in total weed dry matter (73.9%), highest weed control efficiency (73.8%) and lowest weed persistence index (1.03) compared to the unweeded. The reduction in seed yield in unweeded compared to weed-free and hand weeding was 50.8% and 42.1%, respectively. As the imazethapyr-containing herbicides caused crop phytotoxicity, significantly higher crop dry weight (513 g m-2), seed yield (5.53 q ha-1), stover yield (18.0 q ha-1), gross returns and net benefits of moth bean were recorded with clodinafop-propargyl + sodium acifluorfen (312.5 g a.i. ha-1) over other herbicide treatments. Clodinafop-propargyl + sodium acifluorfen (@312.5 g a.i. ha-1) registered the minimum value of weed index (20) and highest values of herbicide efficiency index (3.9) and crop resistance index (4.70).

scholarly journals Weed dynamics, weed control efficiency and yield of aerobic rice as influenced by different weed management practices in eastern U.P.

2020 ◽  
Vol 41 (6) ◽  
pp. 1735-1740
Author(s):  
R.K. Parihar ◽  
◽  
V.K. Srivastava ◽  
S. Kumar ◽  
V. Kumar ◽  
...  
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Weed Management ◽  
Management Practices ◽  
Block Design ◽  
Aerobic Rice ◽  
Control Efficiency ◽  
Randomized Block Design ◽  
Weed Control Efficiency ◽  
Broad Leaf

Aim: To identify the best sequence of pre- and post-emergence herbicides for achieving better weed control efficiency in aerobic rice. Methodology: A field experiment was conducted in Randomized Block Design with eleven treatment combinations, replicated thrice.? The dominant weeds in field were C. dactylon, E. colona and E. crusgalli among grasses, C. rotundus, C. difformis and F. maliaceae among sedges and C. axillaris and P. niruri among broad-leaf weeds. Treatments consisting sequential application of two pre-emergence application [Pendimethalin (30 EC) @ 1.00 kg a.i. ha-1; Butachlor (50 EC) @ 1.5 kg a.i. ha-1] followed by three post emergence herbicides [Bispyribac-Na (10% SC) @ 35 g a.i. ha-1; 2, 4-D Na salt (80 WP) @ 0.06 kg a.i. ha-1; Almix (CME + MSM ) (20 WP) @ 40 g a.i. ha-1] and straw mulching @ 4 t ha-1;? Mechanical weeding at 20 and 45 DAS, weed free and unweeded check.? Results: Among herbicidal treatments, pre-emergence application of pendimethalin at 3-4 DAS fb Bispyribac-Na at 15-20 DAS as post-emergence was most effective in minimizing weed density (4.81 m-2), biomass (6.20 g m-2), weed index (1.11%) and in enhancing the weed control efficiency (84.50%), grain yield (3.68 t ha-1) and straw yield (4.87 t ha-1) over rest of the treatments. Interpretation: Sequential application of pendimethalin at 3-4 DAS fb bispyribac-Na at 15-20 DAS is prominent in enhancing herbicide efficacy and reducing weed flora abundance resulting in higher weed control efficiency and grain yield due to their broad spectrum weed control.

Sign in / Sign up

Export Citation Format

Share Document