scholarly journals The Efficiency of Microstrainers Filtration in the Process of Removing Phytoplankton with Special Consideration of Cyanobacteria

Toxins ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 285 ◽  
Author(s):  
Wanda Czyżewska ◽  
Marlena Piontek
Keyword(s):  
Water Treatment ◽  
Surface Water ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Filtration Process ◽  
Particle Filtration ◽  
Qualitative And Quantitative ◽  
Water Treatment Process ◽  
Adverse Impacts ◽  
Quantitative Monitoring

The research presented in this manuscript concerns the evaluation of the effectiveness of microstrainers, which are designed to reduce the amount of plankton in treated surface water. The efficiency of microstrainer filtration analysis is very important for the proper course of the water-treatment process not only in the Water-Treatment Plant (WTP) in Zielona Góra (central western Poland) but also in other WTPs around the world. The qualitative and quantitative monitoring of the abundance of plankton including cyanobacteria during the particle-filtration process allows not only for the assessment of the potential cyanotoxic risk in surface water providing a source of drinking water, but also allows the evaluation of the action and the prevention of adverse impacts of microstrainers. Over four years of research, it was observed that the largest amount of cyanobacteria before microstrainer filtration took place in May. The dominant species was Limnothrix redeckei. The microstrainer removal of plankton and cyanobacteria was statistically significant. The quantity of removed plankton increased with its increasing content in raw water. The particle-filtration process, by reducing the amount of cyanobacteria, contributes to a decrease in intracellular microcystins.

Investigation of the Treatment Processes Effectiveness of the Surface Water at the Pilot Station and in a Technical Scale

2009 ◽  
Vol 4 (2) ◽  
Author(s):  
Adam Rak
Keyword(s):  
Water Treatment ◽  
Surface Water ◽  
Active Carbon ◽  
Treatment Process ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Technology System ◽  
Water Treatment Process ◽  
Technology Systems

The article focuses on both results of analysing the quality of the surface water taken from the reservoir and effectiveness of the water treatment process' technological examinations carried out both on a pilot station and in a technical scale. The research was carried out on the basis of the water taken from the reservoir named “Sosnowka” which is located at the Karkonosze mountain range bottom. There were 27 physical and chemical factors that underwent the examination. The effectiveness of the water treatment process was assessed basing on such factors as follows colour reduction, turbidity and such indicators as: alkalinity, total hardness, oxidability and conductivity. The 1st stage carried out throughout the water year included examining of the water treatment process' effectiveness in a pilot station in various technology systems by means of such unitary process as: sieving, pre-ozonation, pH correction, coagulation, filtration on anthracite and sand bed, final ozonation and sorption on active carbon. The other stage concerned examination carried out in a technology system in a technical scale of a new water treatment plant. The good quality of the examined water at that time (pH = 6,9; colour = 15 mgPt/L-1) allowed for using a simple technology system with the use of such processes as: sieving, pre-ozonation, filtration on anthracite and sand bed, final ozonation and sorption on active carbon and final correction of the water quality with Na2CO3 and MgCl2. The results aquired while carrying out laboratory technological examinations and those in technical scale allowed for establishing 3 optimal technology systems to be implemented while the water treatment plant operates.

scholarly journals Potential Utilization of Sewage Sludge from Water Treatment Plant as Brick Material

2018 ◽  
Vol 73 ◽  
pp. 05001
Author(s):  
Budi Prasetyo Samadikun ◽  
Siti Rukayah ◽  
Ika Bagus Priyambada ◽  
Sry T. Romaito Lumbantobing ◽  
Mochamad Arief Budihardjo
Keyword(s):  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Waste Recycling ◽  
Raw Material ◽  
Recycling Process ◽  
Economic Problems ◽  
Water Treatment Process ◽  
Research Findings ◽  
Sludge Waste

One of the results of the water treatment process is the sludge. Generally, the processed sludge from the water treatment is collected and delivered to a landfil. With the delivery of sludge waste, it requires additional cost as a levy in handling sludge waste. Therefore, it is needed to innovate on the recycling of sludge. The waste recycling process is expected to minimize the residual impact of the Water Treatment Plant. The process of waste recycling can be done by utilizing sludge from water treatment, which is brick making process. The benefits can eliminate environmental problems and also some economic problems. This study aims to determine the potential of sludge from water treatment plant to be added for brick making by investigating the physical and characteristics of sludge. The research findings show that sludge waste has the potential to become a brick raw material depending on the nature and clay microstructure

Selection of the surface water treatment technology – a full-scale technological investigation

2014 ◽  
Vol 71 (4) ◽  
pp. 638-644 ◽  
Author(s):  
Alina Pruss
Keyword(s):  
Water Treatment ◽  
Surface Water ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Full Scale ◽  
Treatment Technology ◽  
Surface Water Treatment ◽  
Second Stage ◽  
Third Stage ◽  
Water Treatment Technology

A technological investigation was carried out over a period of 2 years to evaluate surface water treatment technology. The study was performed in Poland, in three stages. From November 2011 to July 2012, for the first stage, flow tests with a capacity of 0.1–1.5 m3/h were performed simultaneously in three types of technical installations differing by coagulation modules. The outcome of the first stage was the choice of the technology for further investigation. The second stage was performed between September 2012 and March 2013 on a full-scale water treatment plant. Three large technical installations, operated in parallel, were analysed: coagulation with sludge flotation, micro-sand ballasted coagulation with sedimentation, coagulation with sedimentation and sludge recirculation. The capacity of the installations ranged from 10 to 40 m3/h. The third stage was also performed in a full-scale water treatment plant and was aimed at optimising the selected technology. This article presents the results of the second stage of the full-scale investigation. The critical treatment process, for the analysed water, was the coagulation in an acidic environment (6.5 < pH < 7.0) carried out in a system with rapid mixing, a flocculation chamber, preliminary separation of coagulation products, and removal of residual suspended solids through filtration.

Removal of cyanobacteria, cyanotoxins, heterotrophic bacteria and endotoxins at an operating surface water treatment plant

2006 ◽  
Vol 54 (3) ◽  
pp. 23-28 ◽  
Author(s):  
J. Rapala ◽  
M. Niemelä ◽  
K.A. Berg ◽  
L. Lepistö ◽  
K. Lahti
Keyword(s):  
Water Treatment ◽  
Surface Water ◽  
Treatment Process ◽  
Heterotrophic Bacteria ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Bacterial Isolates ◽  
Sand Filtration ◽  
Surface Water Treatment ◽  
Guide Value

The removal of cyanobacteria, hepatotoxins produced by them (microcystins), phytoplankton, heterotrophic bacteria and endotoxins were monitored at a surface water treatment plant with coagulation, clarification, sand filtration, ozonation, slow sand filtration and chlorination as the treatment process. Coagulation–sand filtration reduced microcystins by 1.2–2.4, and endotoxins by 0.72–2.0 log10 units. Ozonation effectively removed the residual microcystins. The treatment process reduced phytoplankton biomass by 2.2–4.6 and heterotrophic bacteria by 2.0–5.0 log10 units. In treated water, the concentration of microcystins never exceeded the WHO guide value (1 μg/L), but picoplankton and monad cells were often detected in high numbers. The heterotrophic bacterial isolates from the treated waters belonged to genera Sphingomonas, Pseudomonas, Bacillus, Herbaspirillum and Bosea.

Sign in / Sign up

Export Citation Format

Share Document