scholarly journals Integrase-Defective Lentiviral Vectors for Delivery of Monoclonal Antibodies against Influenza

Viruses ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 1460
Author(s):  
Zuleika Michelini ◽  
Judith M. Minkoff ◽  
Jianjun Yang ◽  
Donatella Negri ◽  
Andrea Cara ◽  
...  
Keyword(s):  
Monoclonal Antibodies ◽  
Influenza A ◽  
Large Scale ◽  
Viral Vector ◽  
Direct Injection ◽  
Lentiviral Vectors ◽  
Attractive Alternative ◽  
Scale Production ◽  
Safety Features

Delivering rapid protection against infectious agents to non-immune populations is a formidable public health challenge. Although passive immunotherapy is a fast and effective method of protection, large-scale production and administration of monoclonal antibodies (mAbs) is expensive and unpractical. Viral vector-mediated delivery of mAbs offers an attractive alternative to their direct injection. Integrase-defective lentiviral vectors (IDLV) are advantageous for this purpose due to the absence of pre-existing anti-vector immunity and the safety features of non-integration and non-replication. We engineered IDLV to produce the humanized mAb VN04-2 (IDLV-VN04-2), which is broadly neutralizing against H5 influenza A virus (IAV), and tested the vectors’ ability to produce antibodies and protect from IAV in vivo. We found that IDLV-transduced cells produced functional VN04-2 mAbs in a time- and dose-dependent fashion. These mAbs specifically bind the hemagglutinin (HA), but not the nucleoprotein (NP) of IAV. VN04-2 mAbs were detected in the serum of mice at different times after intranasal (i.n.) or intramuscular (i.m.) administration of IDLV-VN04-2. Administration of IDLV-VN04-2 by the i.n. route provided rapid protection against lethal IAV challenge, although the protection did not persist at later time points. Our data suggest that administration of mAb-expressing IDLV may represent an effective strategy for rapid protection against infectious diseases.

Efficient large-scale production and concentration of HIV-1-based lentiviral vectors for use in vivo

2003 ◽  
Vol 12 (3) ◽  
pp. 221-228 ◽  
Author(s):  
Jason E. Coleman ◽  
Matthew J. Huentelman ◽  
Sergey Kasparov ◽  
Beverly L. Metcalfe ◽  
Julian F. R. Paton ◽  
...  
Keyword(s):  
Animal Studies ◽  
Large Scale ◽  
Lentiviral Vector ◽  
High Titer ◽  
Lentiviral Vectors ◽  
Efficient Production ◽  
Scale Production ◽  
Peripheral Tissues ◽  
Large Scale Production

The aim of this study was to develop an efficient method for packaging and concentrating lentiviral vectors that consistently yields high-titer virus on a scale suitable for in vivo applications. Transient cotransfection of 293T packaging cells with DNA plasmids encoding lentiviral vector components was optimized using SuperFect, an activated dendrimer-based transfection reagent. The use of SuperFect allowed reproducible and efficient production of high-titer lentiviral vector at concentrations greater than 1 × 107transducing units per ml (TU/ml) and required less than one-third of the total amount of DNA used in traditional calcium phosphate transfection methods. Viral titers were further increased using a novel concentration protocol that yielded an average final titer of 1.4 × 1010TU/ml. Lentiviruses produced using these methods exhibited efficient transduction of central nervous system and peripheral tissues in vivo. The method is reproducible and can be scaled up to facilitate the use of these vectors in animal studies.

scholarly journals Lentiviral Vectors for Delivery of Gene-Editing Systems Based on CRISPR/Cas: Current State and Perspectives

Viruses ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1288
Author(s):  
Wendy Dong ◽  
Boris Kantor
Keyword(s):  
Large Scale ◽  
Lentiviral Vector ◽  
Clinical Applications ◽  
Scale Production ◽  
Base Editing ◽  
Epigenome Editing ◽  
Vector Systems ◽  
Dividing Cells

CRISPR/Cas technology has revolutionized the fields of the genome- and epigenome-editing by supplying unparalleled control over genomic sequences and expression. Lentiviral vector (LV) systems are one of the main delivery vehicles for the CRISPR/Cas systems due to (i) its ability to carry bulky and complex transgenes and (ii) sustain robust and long-term expression in a broad range of dividing and non-dividing cells in vitro and in vivo. It is thus reasonable that substantial effort has been allocated towards the development of the improved and optimized LV systems for effective and accurate gene-to-cell transfer of CRISPR/Cas tools. The main effort on that end has been put towards the improvement and optimization of the vector’s expression, development of integrase-deficient lentiviral vector (IDLV), aiming to minimize the risk of oncogenicity, toxicity, and pathogenicity, and enhancing manufacturing protocols for clinical applications required large-scale production. In this review, we will devote attention to (i) the basic biology of lentiviruses, and (ii) recent advances in the development of safer and more efficient CRISPR/Cas vector systems towards their use in preclinical and clinical applications. In addition, we will discuss in detail the recent progress in the repurposing of CRISPR/Cas systems related to base-editing and prime-editing applications.

Confocal Microscopy in Ecophysiological Studies of Algae: A Door to Understanding Autofluorescence in Red Algae

2021 ◽  
pp. 1-9
Author(s):  
Teresa Coronado-Parra ◽  
Mónica Roldán ◽  
Marina Aboal
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Nitrogen Concentration ◽  
Monochromatic Light ◽  
Environmental Parameters ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Scale Production ◽  
Light Intensities

Alga in the genus Chroothece have been reported mostly from aquatic or subaerial continental environments, where they grow in extreme conditions. The strain Chroothece mobilis MAESE 20.29 was exposed to different light intensities, red and green monochromatic light, ultraviolet (UV) radiation, high nitrogen concentrations, and high salinity to assess the effect of those environmental parameters on its growth. Confocal laser scanning microscopy (CLSM) was used as an “in vivo” noninvasive single-cell method for the study. The strain seemed to prefer fairly high light intensities and showed a significant increase in allophycocyanin (APC) and chlorophyll a [photosystem I (PSI) and photosystem II (PSII)] fluorescence with 330 and 789 μM/cm2/s intensities. Green monochromatic light promoted a significant increase in the fluorescence of APC and chlorophyll a (PSI and PSII). UV-A significantly decreased phycocyanin and increased APC, while UV-A + B showed a greater decreasing effect on c-Phycocyanin but did not significantly change concentrations of APC. The increase in nitrogen concentration in the culture medium significantly and negatively affected all pigments, and no effect was observed with an increase in salinity. Our data show that CLSM represents a very powerful tool for ecological research of microalgae in small volumes and may contribute to the knowledge of phycobiliproteins in vivo behavior and the parameters for the large-scale production of these pigments.

Liposomes

2017 ◽  
pp. 52-87
Author(s):  
Mangal Shailesh Nagarsenker ◽  
Megha Sunil Marwah
Keyword(s):  
Quality Control ◽  
Large Scale ◽  
Clinical Success ◽  
Scale Production ◽  
Large Scale Production ◽  
Diagnostic Applications ◽  
Set Up ◽  
Insight Into ◽  
Characterisation Techniques

The science of liposomes has expanded in ambit from bench to clinic through industrial production in thirty years since the naissance of the concept. This chapter makes an attempt to bring to light the impregnable contributions of great researchers in the field of liposomology that has witnessed clinical success in the recent times. The journey which began in 1965 with the observations of Bangham and further advances made en route (targeting/stealthing of liposomes) along with alternative and potential liposome forming amphiphiles has been highlighted in this chapter. The authors have also summarised the conventional and novel industrially feasible methods used to formulate liposomes in addition to characterisation techniques which have been used to set up quality control standards for large scale production. Besides, the authors have provided with an overview of primary therapeutic and diagnostic applications and a brief insight into the in vivo behaviour of liposomes.

scholarly journals Production of Phytotoxic Metabolite Using Biphasic Fermentation System from Strain C1136 of Lasiodiplodia pseudotheobromae, a Potential Bioherbicidal Agent

2017 ◽  
Vol 9 (3) ◽  
pp. 371-377
Author(s):  
Charles Oluwaseun ADETUNJI ◽  
Julius Kola OLOKE ◽  
Gandham PRASAD ◽  
Moses ABALAKA ◽  
Emenike Onyebum IROKANULO
Keyword(s):  
Large Scale ◽  
Wild Strain ◽  
Fermentation Medium ◽  
Scale Production ◽  
Conventional Farming ◽  
Large Scale Production ◽  
Phytotoxic Metabolite ◽  
Biphasic Fermentation

Formulation of effective and environmental friendly bioherbicides depends on the type of fermentation medium used for the production of phytotoxic metabolites. The effect of biomass, colony forming unit and the phytotoxic metabolite produced from the biphasic fermentation was carried out, while the phytotoxic metabolite was  tested in vivo and in-vitro on Echinochola crus-galli and dicotyledonous Chromolaena odorata. The mutant strain of Lasiodiplodia pseudotheobromae C1136 (Lp90) produced the highest amount of conidia and the largest necrotic area on the two tested weeds when compared to its wild strain in the different biphasic media combinations. The study revealed that the biphasic system containing PDB + rice produced the highest bioherbicidal activities. Therefore, the phytotoxic metabolites from strain C1136 are suggested for large scale production of bioherbicides for the management of weeds in conventional farming to improve yield and enhance food security.

scholarly journals Blakeslea trispora Photoreceptors: Identification and Functional Analysis

2020 ◽  
Vol 86 (8) ◽  
Author(s):  
Wei Luo ◽  
Chao Xue ◽  
Yuzheng Zhao ◽  
Huili Zhang ◽  
Zhiming Rao ◽  
...  
Keyword(s):  
Large Scale ◽  
Binding Domain ◽  
Site Directed Mutagenesis ◽  
Flavin Mononucleotide ◽  
Blakeslea Trispora ◽  
Scale Production ◽  
Bioinformatics Analyses ◽  
Content Type ◽  
Flavin Binding

ABSTRACT Blakeslea trispora is an industrial fungal species used for large-scale production of carotenoids. However, B. trispora light-regulated physiological processes, such as carotenoid biosynthesis and phototropism, are not fully understood. In this study, we isolated and characterized three photoreceptor genes, btwc-1a, btwc-1b, and btwc-1c, in B. trispora. Bioinformatics analyses of these genes and their protein sequences revealed that the functional domains (PAS/LOV [Per-ARNT-Sim/light-oxygen-voltage] domain and zinc finger structure) of the proteins have significant homology to those of other fungal blue-light regulator proteins expressed by Mucor circinelloides and Neurospora crassa. The photoreceptor proteins were synthesized by heterologous expression in Escherichia coli. The chromogenic groups consisting of flavin adenine dinucleotide (FAD) and flavin mononucleotide (FMN) were detected to accompany BTWC-1 proteins by using high-performance liquid chromatography (HPLC) and fluorescence spectrometry, demonstrating that the proteins may be photosensitive. The absorbance changes of the purified BTWC-1 proteins seen under dark and light conditions indicated that they were light responsive and underwent a characteristic photocycle by light induction. Site-directed mutagenesis of the cysteine residual (Cys) in BTWC-1 did not affect the normal expression of the protein in E. coli but did lead to the loss of photocycle response, indicating that Cys represents a flavin-binding domain for photon detection. We then analyzed the functions of BTWC-1 proteins by complementing btwc-1a, btwc-1b, and btwc-1c into the counterpart knockout strains of M. circinelloides for each mcwc-1 gene. Transformation of the btwc-1a complement into mcwc-1a knockout strains restored the positive phototropism, while the addition of btwc-1c complement remedied the deficiency of carotene biosynthesis in the mcwc-1c knockout strains under conditions of illumination. These results indicate that btwc-1a and btwc-1c are involved in phototropism and light-inducible carotenogenesis. Thus, btwc-1 genes share a conserved flavin-binding domain and act as photoreceptors for control of different light transduction pathways in B. trispora. IMPORTANCE Studies have confirmed that light-regulated carotenogenesis is prevalent in filamentous fungi, especially in mucorales. However, few investigations have been done to understand photoinduced synthesis of carotenoids and related mechanisms in B. trispora, a well-known industrial microbial strains. In the present study, three photoreceptor genes in B. trispora were cloned, expressed, and characterized by bioinformatics and photoreception analyses, and then in vivo functional analyses of these genes were constructed in M. circinelloides. The results of this study will lead to a better understanding of photoreception and light-regulated carotenoid synthesis and other physiological responses in B. trispora.

scholarly journals Large-Scale Production of Lentiviral Vectors: Current Perspectives and Challenges

Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1051
Author(s):  
Eduardo Martínez-Molina ◽  
Carlos Chocarro-Wrona ◽  
Daniel Martínez-Moreno ◽  
Juan A. Marchal ◽  
Houria Boulaiz
Keyword(s):  
Viral Vectors ◽  
Large Scale ◽  
Lentiviral Vectors ◽  
Good Manufacturing Practice ◽  
Scale Production ◽  
Gene Therapies ◽  
Packaging Cell ◽  
Large Scale Production ◽  
Target Production

Lentiviral vectors (LVs) have gained value over recent years as gene carriers in gene therapy. These viral vectors are safer than what was previously being used for gene transfer and are capable of infecting both dividing and nondividing cells with a long-term expression. This characteristic makes LVs ideal for clinical research, as has been demonstrated with the approval of lentivirus-based gene therapies from the Food and Drug Administration and the European Agency for Medicine. A large number of functional lentiviral particles are required for clinical trials, and large-scale production has been challenging. Therefore, efforts are focused on solving the drawbacks associated with the production and purification of LVsunder current good manufacturing practice. In recent years, we have witnessed the development and optimization of new protocols, packaging cell lines, and culture devices that are very close to reaching the target production level. Here, we review the most recent, efficient, and promising methods for the clinical-scale production ofLVs.

Sign in / Sign up

Export Citation Format

Share Document