scholarly journals Cyanobacterial Biomass as a Potential Biosorbent for the Removal of Recalcitrant Dyes from Water

Water ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3176
Author(s):  
Carlos Diaz-Uribe ◽  
Barni Angulo ◽  
Karen Patiño ◽  
Vincent Hernández ◽  
William Vallejo ◽  
...  
Keyword(s):  
Chemical Characterization ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Dose Time ◽  
Physico Chemical ◽  
Order Kinetic Model ◽  
Mb Adsorption ◽  
Cyanobacterial Biomass

The accumulation of cyanobacteria produced due to eutrophication processes and the increment of different pollutants in water as a result of industrial processes affects aquatic environments such as the ocean, rivers, and swamps. In this work, cyanobacterial biomass was used as a biosorbent for the removal of a commercial dye, methylene blue (MB). Thus, MB was removed from biomass obtained from cyanobacterial samples collected from the swamp located in the Colombian Caribbean. Spectroscopical techniques such as FTIR, SEM, EDX measurements were used for the physico-chemical characterization of the bio-adsorbent material. Furthermore, we present the effect of various adsorption parameters such as pH, MB dose, time, and adsorbent concentration on the adsorbent equilibrium process. Three different isotherm models were used to model the MB adsorption on biomass. The functional groups identified on biomass suggest that these models are suitable for the characterization of the sorption of cationic dyes on the surfaces of the biomass; in addition, an SEM assay showed the heterogeneous surface of the biomass’ morphology. The equilibrium tests suggested a multilayer type adsorption of MB on the biomass surface. The kinetics results show that a pseudo-second order kinetic model was suitable to describe the MB adsorption on the biomass surface. Finally, the herein obtained results give an alternative to resolve the eutrophication problems generated by cyanobacterial growth in the swamp “Ciénaga de Malambo”.

Laboratory Methods for the Physico-Chemical Characterization of Recombinant Allergens as Reference Standards

Alergologia ◽  
2020 ◽  
Vol 1 (4) ◽  
pp. 7
Author(s):  
Mariana Vieru ◽  
Florin-Dan Popescu ◽  
Laura Haidar ◽  
Carmen Bunu-Panaitescu
Keyword(s):  
Chemical Characterization ◽  
Reference Standards ◽  
Recombinant Allergens ◽  
Laboratory Methods ◽  
Physico Chemical

Mineralogical and physico-chemical characterization of a sintered feldspathic sand

2010 ◽  
Vol 35 (5) ◽  
pp. 261-267 ◽  
Author(s):  
Wissemn Gallala ◽  
Mohamed Essghaier Gaied ◽  
Borhen Kchaou
Keyword(s):  
Chemical Characterization ◽  
Physico Chemical

Physical - Chemical Issues of Cephalosporin Intercalated Nanoparticles for Life - Threatening Infections Treatment

2001 ◽  
Vol 71 (3) ◽  
pp. 342-349
Author(s):  
Lucian Eva ◽  
Letitia Doina Duceac ◽  
Liviu Stafie ◽  
Constantin Marcu ◽  
Geta Mitrea ◽  
...  
Keyword(s):  
Chemical Characterization ◽  
Advanced Characterization ◽  
Generation Cephalosporin ◽  
Fourth Generation ◽  
Exchange Method ◽  
Physico Chemical ◽  
Life Threatening ◽  
Double Hydroxide ◽  
Double Hydroxides

The fourth generation cephalosporin antibacterial agent, cefepime, was loaded into layered double hydroxides for enhancing antibiotic efficiency, reducing side effects, as well as achieving the sustained release property. The intercalation of antibiotic into the inter-gallery of ZnAl-layered double hydroxide (LDH) was carried out using ion exchange method, by this constituting a nano-sized organic-inorganic hybrid material for a controlled release novel formulation. Although cefepime is a broad spectrum antibiotic, it has various adverse effects and a significant degradation rate. Thus, the preparation and physico-chemical characterization of nanomaterials able to intercalate this drug is an important study for medical and pharmaceutical field. The antibiotic inclusion into LDHs nanostructure was confirmed by advanced characterization techniques and the release profile of cefepime was analysed with the respect to pH of the simulated media.

Adsorption Characteristics of Phenol in Aqueous Solution by Pinus massoniana Biochar

2013 ◽  
Vol 295-298 ◽  
pp. 1154-1160 ◽  
Author(s):  
Guo Zhi Deng ◽  
Xue Yuan Wang ◽  
Xian Yang Shi ◽  
Qian Qian Hong
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Pinus Massoniana ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Salt Ions ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objective of this paper is to investigate the feasibility of phenol adsorption from aqueous solution by Pinus massoniana biochar. Adsorption conditions, including contact time, initial phenol concentration, adsorbent dosage, strength of salt ions and pH, have been investigated by batch experiments. Equilibrium can be reached in 24 h for phenol from 50 to 250 mg• L-1. The optimum pH value for this kind of biochar is 5.0. The amount of phenol adsorbed per unit decreases with the increase in adsorbent dosage. The existence of salt ions makes negligible influence on the equilibrium adsorption capacity. The experimental data is analyzed by the Freundlich and Langmuir isotherm models. Equilibrium data fits well to the Freundlich model. Adsorption kinetics models are deduced and the pseudo-second-order kinetic model provides a good correlation for the adsorbent process. The results show that the Pinus massoniana biochar can be utilized as an effective adsorption material for the removal of phenol from aqueous solution.

scholarly journals Investigation of Seeds and Peels of Citrullus colocynthis as Efficient Natural Adsorbent for Methylene Blue Dye

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1279
Author(s):  
Wafa Mohammed Alghamdi ◽  
Ines El Mannoubi
Keyword(s):  
Methylene Blue ◽  
Kinetic Model ◽  
Langmuir Isotherm ◽  
Order Kinetic ◽  
Citrullus Colocynthis ◽  
Natural Adsorbent ◽  
Spontaneous Process ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Mb Adsorption

Natural adsorbents as low-cost materials have been proved efficient for water remediation and have significant capacity for the removal of certain chemicals from wastewater. The present investigation aimed to use Citrullus colocynthis seeds (CCSs) and peels (CCPs) as an efficient natural adsorbent for methylene blue (MB) dye in an aqueous solution. The examined biosorbents were characterized using surface area analyzer (BET), scanning electron microscope (SEM), thermogravimetric analyzer (TGA) and Fourier transform infra-red (FT-IR) spectroscopy. Batch adsorption experiments were conducted to optimize the main factors influencing the biosorption process. The equilibrium data for the adsorption of MB by CCSs were best described by the Langmuir isotherm followed by the Freundlich adsorption isotherms, while the equilibrium data for MB adsorption by CCPs were well fitted by the Langmuir isotherm followed by the Temkin isotherm. Under optimum conditions, the maximum biosorption capacity and removal efficiency were 18.832 mg g−1 and 98.00% for MB-CCSs and 4.480 mg g−1 and 91.43% for MB-CCPs. Kinetic studies revealed that MB adsorption onto CCSs obeys pseudo-first order kinetic model (K1 = 0.0274 min−1), while MB adsorption onto CCPs follows the pseudo-second order kinetic model (K2 = 0.0177 g mg−1 min−1). Thermodynamic studies revealed that the MB biosorption by CCSs was endothermic and a spontaneous process in nature associated with a rise in randomness, but the MB adsorption by CCPs was exothermic and a spontaneous process only at room temperature with a decline in disorder. Based on the obtained results, CCSs and CCPSs can be utilized as efficient, natural biosorbents, and CCSs is promising since it showed the highest removal percentage and adsorption capacity of MB dye.

scholarly journals Preparation and Characterization of Cationized Cellulose for the Removal of Anionic Dyes

2001 ◽  
Vol 19 (3) ◽  
pp. 197-210 ◽  
Author(s):  
A. Hashem ◽  
Reda M. El-Shishtawy
Keyword(s):  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Structural Features ◽  
Isotherm Models ◽  
Acid Orange 7 ◽  
Anionic Dyes ◽  
Adsorption Parameters ◽  
Direct Blue ◽  
Equilibrium Data

The factors influencing the cationization of microcrystalline cellulose with 3-chloro-2-hydroxypropyl triethylammonium chloride in the presence of NaOH were investigated. The course of the reaction was followed by estimating the nitrogen content of the cationized product while its structural features were confirmed by IR analysis. The ability of cationized cellulose to adsorb anionic dyes, viz. Acid Orange 7, Direct Blue 75 and Direct Violet 31, was investigated at 25°C and 50°C. The equilibrium data obtained were fitted by the Langmuir and Freundlich isotherm models, allowing the corresponding adsorption parameters to be determined. The results showed that the adsorption capacity was dependent on the adsorbent, temperature, the nature of the dye and (to some extent) on van der Waals and hydrogen bonding. Cationized cellulose exhibited a much better adsorption capacity towards anionic dyes than cellulose.

Sign in / Sign up

Export Citation Format

Share Document