Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)

2015 ◽  
Keyword(s):  
Heat Treatment ◽  
Copper Alloy ◽  
Subsequent Heat Treatment ◽  
Manganese Copper

CMW 100

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
High Tensile Strength ◽  
Electrical Components ◽  
Flash Welding ◽  
Hardening Heat Treatment

Abstract CMW 100 is a copper alloy that combines high tensile strength with high electrical and thermal conductivity. It responds to age-hardening heat treatment. It is used for flash welding dies, springs, electrical components, high-strength backing material for brazed assemblies, and wire guides. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-29. Producer or source: CMW Inc. Originally published as Mallory 100, August 1955, revised October 2000.

CONDULOY

Alloy Digest ◽  
1953 ◽  
Vol 2 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Hardening Heat Treatment

Abstract CONDULOY is a low beryllium-copper alloy containing about 1.5% nickel. It responds to age-hardening heat treatment for improved mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-11. Producer or source: Brush Beryllium Company.

BRUSH ALLOY 10

Alloy Digest ◽  
1968 ◽  
Vol 17 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Resistance Welding Electrodes ◽  
Hardening Heat Treatment

Abstract BRUSH Alloy 10 is a low beryllium, cobalt-bearing copper alloy offering an excellent combination of strength, toughness and conductivity due to an age-hardening heat treatment. It is recommended for springs, clutch rings, resistance welding electrodes and tips, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-187. Producer or source: Brush Beryllium Company.

Combination of hot isostatic pressing and subsequent heat treatment for additively manufactured Zr-1Mo components

2021 ◽  
Vol 285 ◽  
pp. 129123
Author(s):  
Xiaohao Sun ◽  
Debao Liu ◽  
Minfang Chen ◽  
Weiwei Zhou ◽  
Naoyuki Nomura ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Hot Isostatic Pressing ◽  
Subsequent Heat Treatment ◽  
Isostatic Pressing

Engineering mechanical properties by controlling the microstructure of an Fe–Ni–Mn martensitic steel through pre-cold rolling and subsequent heat treatment

2021 ◽  
Vol 804 ◽  
pp. 140760
Author(s):  
Hamidreza Koohdar ◽  
Pouya Hakimipour ◽  
Hamid Reza Jafarian ◽  
Terence G. Langdon ◽  
Mahmoud Nili-Ahmadabadi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cold Rolling ◽  
Martensitic Steel ◽  
Subsequent Heat Treatment

Preparation of Hydroxyapatite/Chitosan Biological Coatings on Carbon/Carbon Composites

2010 ◽  
Vol 434-435 ◽  
pp. 502-505
Author(s):  
Ying Hua Li ◽  
Li Yun Cao ◽  
Jian Feng Huang ◽  
Xie Rong Zeng
Keyword(s):  
Heat Treatment ◽  
Electrophoretic Deposition ◽  
Isopropyl Alcohol ◽  
Raw Materials ◽  
Composite Coatings ◽  
Thermal Conditions ◽  
Hydrothermal Condition ◽  
Subsequent Heat Treatment ◽  
Carbon Composites ◽  
Deposition Voltage

Hydroxyapatite/Chitosan (HAp/CS) bio-coatings were prepared on the surface of carbon/ carbon (C/C) composites by hydrothermal electrophoretic deposition, using sonochemical process resulted HAp nanoparticles, isopropyl alcohol and chitosan as raw materials. The influences of hydro- thermal conditions and deposition voltage on the microstructures and morphologies of the as-prepared coatings were investigated. It was shown that homogenous and dense HAp/CS coatings on C/C composites are obtained by hydrothermal electrophoretic deposition. With the increase of deposition voltage, density and homogeneity of the as-prepared HAp/CS composite coatings are well improved. Due to the growth of HAp nanoparticles in the hydrothermal condition, the subsequent heat treatment of the HAp/CS coatings is not needed.

Growth of polycrystalline hydroxyapatite thin films by pulsed laser deposition and subsequent heat treatment in air

1998 ◽  
Author(s):  
V. D. Nelea ◽  
Cornel Ghica ◽  
C. Martin ◽  
Alexandru Hening ◽  
Ion N. Mihailescu ◽  
...  
Keyword(s):  
Thin Films ◽  
Heat Treatment ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Subsequent Heat Treatment ◽  
Laser Deposition
Sign in / Sign up

Export Citation Format

Share Document