scholarly journals Visualizing Relative Potential for Aquatic Ecosystem Toxicity Using the EPA Toxics Release Inventory and Life Cycle Assessment Methods

2018 ◽  
pp. 61-67
Author(s):  
Theodore Langlois ◽  
Michael Carbajales-Dale ◽  
Elizabeth Carraway
Keyword(s):  
South Carolina ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Aquatic Toxicity ◽  
Toxic Release Inventory ◽  
Full Time ◽  
Paper Mills ◽  
Zinc Compounds ◽  
Common Basis

The U.S. EPA Toxic Release Inventory has been available since 1987 as a record of industrial releases of toxic chemicals following the 1986 Emergency Planning and Community Right-to-Know Act. Combining this release data with estimates of relative toxicity of these chemicals to aquatic systems increases the value of the database by providing a common basis for comparison. The Tool for Reduction and Assessment of Chemicals and Other Environmental Impacts is a database of characterization factors to assess environmental impacts. It was used to develop relative ecotoxicity impacts and interpreted using Life Cycle Assessment concepts. The visualization software Tableau was used to generate representations of the preliminary results in this communication. The major potential sources of aquatic toxicity have been identified for South Carolina by industry type and by year over the period 1987–2016. The possibility of toxicity from releases of zinc compounds from power generation and pulp and paper mills far exceeds all other sources. Zinc compounds dominated the potential ecotoxicity over the full time period 1987–2016.

scholarly journals Environmental Consequences of Closing the Textile Loop—Life Cycle Assessment of a Circular Polyester Jacket

2021 ◽  
Vol 11 (7) ◽  
pp. 2964
Author(s):  
Gregor Braun ◽  
Claudia Som ◽  
Mélanie Schmutz ◽  
Roland Hischier
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Circular Economy ◽  
Textile Industry ◽  
System Analysis ◽  
Action Plan ◽  
The European Union ◽  
Environmental Consequences ◽  
Energy And Material Flows

The textile industry is recognized as being one of the most polluting industries. Thus, the European Union aims to transform the textile industry with its “European Green Deal” and “Circular Economy Action Plan”. Awareness regarding the environmental impact of textiles is increasing and initiatives are appearing to make more sustainable products with a strong wish to move towards a circular economy. One of these initiatives is wear2wearTM, a collaboration consisting of multiple companies aiming to close the loop for polyester textiles. However, designing a circular product system does not lead automatically to lower environmental impacts. Therefore, a Life Cycle Assessment study has been conducted in order to compare the environmental impacts of a circular with a linear workwear jacket. The results show that a thoughtful “circular economy system” design approach can result in significantly lower environmental impacts than linear product systems. The study illustrates at the same time the necessity for Life Cycle Assessment practitioners to go beyond a simple comparison of one product to another when it comes to circular economy. Such products require a wider system analysis approach that takes into account multiple loops, having interconnected energy and material flows through reuse, remanufacture, and various recycling practices.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

scholarly journals Sustainability Assessment with Integrated Circular Economy Principles: A Toy Case Study

2021 ◽  
Vol 13 (7) ◽  
pp. 3856
Author(s):  
Rebeka Kovačič Lukman ◽  
Vasja Omahne ◽  
Damjan Krajnc
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Circular Economy ◽  
Social Life ◽  
Product Life Cycle ◽  
Sustainability Assessment ◽  
Social Impacts ◽  
Life Cycle Costing ◽  
Social Life Cycle Assessment

When considering the sustainability of production processes, research studies usually emphasise environmental impacts and do not adequately address economic and social impacts. Toy production is no exception when it comes to assessing sustainability. Previous research on toys has focused solely on assessing environmental aspects and neglected social and economic aspects. This paper presents a sustainability assessment of a toy using environmental life cycle assessment, life cycle costing, and social life cycle assessment. We conducted an inventory analysis and sustainability impact assessment of the toy to identify the hotspots of the system. The main environmental impacts are eutrophication, followed by terrestrial eco-toxicity, acidification, and global warming. The life cycle costing approach examined the economic aspect of the proposed design options for toys, while the social assessment of the alternative designs revealed social impacts along the product life cycle. In addition, different options based on the principles of the circular economy were analysed and proposed in terms of substitution of materials and shortening of transport distances for the toy studied.

scholarly journals Analysis of the Characteristics of Environmental Impacts According to the Cut-Off Criteria Applicable to the Streamlined Life Cycle Assessment (S-LCA) of Apartment Buildings in South Korea

2021 ◽  
Vol 13 (5) ◽  
pp. 2898
Author(s):  
Rakhyun Kim ◽  
Myung-Kwan Lim ◽  
Seungjun Roh ◽  
Won-Jun Park
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Impact Analysis ◽  
Impact Categories ◽  
Environmental Impact Analysis ◽  
Apartment Buildings ◽  
Environmental Impact Categories ◽  
Weight Percentile

This study analyzed the characteristics of the environmental impacts of apartment buildings, a typical housing type in South Korea, as part of a research project supporting the streamlined life cycle assessment (S-LCA) of buildings within the G-SEED (Green Standard for Energy and Environmental Design) framework. Three recently built apartment building complexes were chosen as study objects for the quantitative evaluation of the buildings in terms of their embodied environmental impacts (global warming potential, acidification potential, eutrophication potential, ozone layer depletion potential, photochemical oxidant creation potential, and abiotic depletion potential), using the LCA approach. Additionally, we analyzed the emission trends according to the cut-off criteria of the six environmental impact categories by performing an S-LCA with cut-off criteria 90–99% of the cumulative weight percentile. Consequently, we were able to present the cut-off criterion best suited for S-LCA and analyze the effect of the cut-off criteria on the environmental impact analysis results. A comprehensive environmental impact analysis of the characteristics of the six environmental impact categories revealed that the error rate was below 5% when the cut-off criterion of 97.5% of the cumulative weight percentile was applied, thus verifying its validity as the optimal cut-off criterion for S-LCA.

scholarly journals Life-Cycle Assessment of a Rural Terraced House: A Struggle with Sustainability of Building Renovations

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2472
Author(s):  
Karel Struhala ◽  
Milan Ostrý
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Sources ◽  
Construction Sector ◽  
Building Stock ◽  
Existing Building ◽  
New Construction ◽  
Consumption Energy

Contemporary research stresses the need to reduce mankind’s environmental impacts and achieve sustainability. One of the keys to this is the construction sector. New buildings have to comply with strict limits regarding resource consumption (energy, water use, etc.). However, they make up only a fraction of the existing building stock. Renovations of existing buildings are therefore essential for the reduction of the environmental impacts in the construction sector. This paper illustrates the situation using a case study of a rural terraced house in a village near Brno, Czech Republic. It compares the life-cycle assessment (LCA) of the original house and its proposed renovation as well as demolition followed by new construction. The LCA covers both the initial embodied environmental impacts (EEIs) and the 60-year operation of the house with several variants of energy sources. The results show that the proposed renovation would reduce overall environmental impacts (OEIs) of the house by up to 90% and the demolition and new construction by up to 93% depending on the selected energy sources. As such, the results confirm the importance of renovations and the installation of environmentally-friendly energy sources for achieving sustainability in the construction sector. They also show the desirability of the replacement of inefficient old buildings by new construction in specific cases.

Der Umsatz-Nachhaltigkeitsindex*/The Turnover-Sustainability-Index

2016 ◽  
Vol 106 (03) ◽  
pp. 136-140
Author(s):  
R. Miehe ◽  
M. Wiedenmann ◽  
T. Prof. Bauernhansl
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Sustainability Index ◽  
Behavior Based ◽  
Comparative Examination

Die Ökobilanz hat sich als Instrument zur Bewertung der Umweltauswirkungen von Produkten und Prozessen durchgesetzt. Dennoch stellt ihre Durchführung Nutzer immer wieder vor Herausforderungen. Der Fachartikel präsentiert einen Ansatz für eine vergleichende Betrachtung der ökologischen Auswirkungen des unternehmerischen Handelns auf Basis der jeweiligen Unternehmens- und Branchenumsätze. Der Umsatz-Nachhaltigkeitsindex soll als Konzept für ein Benchmark für Unternehmen einer Branche dienen.   Life Cycle Assessment has prevailed as an instrument to evaluate the environmental impact of products and processes. Its execution, however, poses a challenge to operators. In this paper, we present an approach for a comparative examination of environmental impacts of industrial behavior based on the turnover of companies and their equivalent sectors. The Turnover-Sustainability-Index serves as a benchmark for companies within a sector.

scholarly journals The most important environmental impacts of the Coniferous timber and lumber import caused by transport

2016 ◽  
Vol 64 (1) ◽  
pp. 1 ◽  
Author(s):  
Zoltán BÖRCSÖK ◽  
Zoltán PÁSZTORY ◽  
Miklós SCHÖBERL
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts

<p class="p1">A cikk egy olyan kutatásról számol be, mely a fenyő faanyag behozatal szállításból adódó környezeti terheit az alábbi két területen mérte fel:</p><ul><li>üvegházhatású gázok kibocsátása</li><li>nem megújuló primer energiaigény.</li></ul><p class="p1">Mindezt azzal a céllal tette, hogy megállapítsa: ezek a számszerűsített környezetterhek hogyan módosítják az import fenyő faanyag környezeti megítélését. </p><p class="p1">A munka során az import mennyiségi adatokat statisztikából vettük, míg a szállítási távolságokat becsléssel határoztuk meg. A vizsgált két terület környezeti terheinek teljes életútelemzés (LCA; Life Cycle Assessment) alapján meghatározott fajlagos mutatói (kgCO<sub>2eq</sub>/tkm; és MJ/tkm) szakirodalmi forrásból származnak. </p><p class="p1">Mivel a fenyő faanyag egyik fő felhasználója az építészet, ezért a kutatást és az eredmények kiértékelését a faépítészetre figyelemmel végeztük el. Az üvegházhatású gázok kibocsátásával kapcsolatban megállapítottuk, hogy az import fenyő faanyag szállítási igénye nem módosítja jelentősen felhasználásának ilyen alapú környezeti megítélését, azaz a faanyag továbbra is megőrzi, különösen hosszú élettartamú nagy tömegű termékekben (pl. faépítészet) széntároló képességét. Ugyanakkor a klímavédelem érdekében változatlanul keresni kell – az import fenyő szállítása területén is – az üvegházhatású gázok kibocsátásának csökkentési lehetőségét.</p><p class="p3">A nem megújuló primer energiaigény vizsgálati eredményeit egy épület energiahatékonyságának vizsgálatára felhasználva teljesen újszerű megközelítésben jártunk el akkor, amikor az épület teljes életútjának összes nem megújuló primer energiaigényét két csoportra bontva az ún. „szürke energia” alakulását vettük figyelembe. Ennek során megállapítottuk, hogy az import fenyő szállításának nem megújuló primer energiaigénye már oly módon járulhat hozzá egy épület energiahatékonyságához, hogy az már nem hagyható figyelmen kívül, és intézkedéseket igényel. </p><p> </p>

scholarly journals Life Cycle Assessment of viticultural technical management routes (TMRs): comparison between an organic and an integrated management route

OENO One ◽  
2016 ◽  
Vol 50 (2) ◽  
Author(s):  
Anthony Rouault ◽  
Sandra Beauchet ◽  
Christel Renaud-Gentie ◽  
Frédérique Jourjon
Keyword(s):  
Heavy Metal ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Plant Protection ◽  
Resource Depletion ◽  
Impact Categories ◽  
Nitrogen Emissions ◽  
Technical Management ◽  
Lca Results

<p style="text-align: justify;"><strong>Aims</strong>: Using Life Cycle Assessment (LCA), this study aims to compare the environmental impacts of two different viticultural technical management routes (TMRs); integrated and organic) and to identify the operations that contribute the most to the impacts.</p><p style="text-align: justify;"><strong>Methods and results</strong>: LCA impact scores were expressed in two functional units: 1 ha of cultivated area and 1 kg of collected grape. We studied all operations from field preparation before planting to the end-of-life of the vine. Inputs and outputs were transformed into potential environmental impacts thanks to SALCA™ (V1.02) and USETox™ (V1.03) methods. Plant protection treatments were a major cause of impact for both TMRs for fuel-related impact categories. For both TMRs, the main contributors to natural resource depletion and freshwater ecotoxicity were trellis system installation and background heavy metal emissions, respectively.</p><p style="text-align: justify;"><strong>Conclusion</strong>: This study shows that the studied organic TMR has higher impact scores than the integrated TMR for all the chosen impact categories except eutrophication. However, the chosen TMRs are only typical of integrated and organic viticulture in Loire Valley and some emission models (heavy metal, fuel-related emissions, and nitrogen emissions) have to be improved in order to better assess the environmental impacts of viticulture. Soil quality should also be integrated to LCA results in viticulture because this lack may be a disadvantage for organic viticulture.</p><strong>Significance and impact of study</strong>: This study is among the first to compare LCA results of an integrated and an organic TMR.

Sign in / Sign up

Export Citation Format

Share Document