scholarly journals A INFLUÊNCIA DO POSICIONAMENTO DAS FIBRAS NA RESISTÊNCIA MECÂNICA DOS COMPÓSITOS / THE INFLUENCE OF FIBER POSITION ON THE MECHANICAL STRENGTH OF COMPOSITES

2020 ◽  
Vol 6 (11) ◽  
pp. 86078-86093
Author(s):  
Karen Furtado Timbó ◽  
Audelis de Oliveira Marcelo Júnior ◽  
Francisco Yuri Rios Osterno ◽  
André Madson Araújo Frota ◽  
Edivaldo Pereira de Carvalho Neto ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Fiber Position

scholarly journals Effects of silkworm fiber position on flexural and compressive properties of silk fiber-reinforced composites

2018 ◽  
Vol 51 (2) ◽  
pp. 57
Author(s):  
Ariyani Faizah ◽  
Dendi Murdiyanto ◽  
Yulita Nur Widyawati ◽  
Narawidya Laksmi Dewi
Keyword(s):  
Flexural Strength ◽  
Mechanical Strength ◽  
Compression Strength ◽  
Testing Machine ◽  
Silk Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Side Group ◽  
Fiber Reinforced ◽  
Fiber Position

Background: Fiber-reinforced composites represent a combination of fiber-reinforced composite materials. The availability of fiber within dentistry in Indonesia is limited and, therefore, requires lengthy advance ordering. The increasing use of fiber derived from natural materials, such as silk, is of greater concern due to its considerable mechanical strength, biocompatibility and wider availability. The application of fiber will increase the mechanical strength of fiber-reinforced composites, including both flexural and compression strength. One factor affecting the mechanical strength of fiber is the laying of fiber or fiber position. Purpose: The purpose of this research is to establish the influence of silkworm fiber position on both the flexural and compression strength of silk fiber-reinforced composites. Methods: Flexural strength and compression strength tests using a universal testing machine involved the division of the research population into three treatment groups: compression side, neutral side and tension side. Results: The results of data analysis indicated that the tension side group possessed the highest flexural strength (121.42 MPa), while the compression side group demonstrated the highest compression strength (337.65 MPa). A one-way ANOVA analysis test produced a significant result of p = 0.000 (<0.05) both for silkworm fiber position effect and compression strength of silk fiber reinforced composites. Conclusion: The position of silkworm fiber will affect its flexural strength as well as that of the compression of silk fiber-reinforced composites.

FORMULATION AND DEVELOPMENT OF FAST DISSOLVING TABLET OF METOCLOPRAMIDE: AN ANTI-EMETIC DRUG

2019 ◽  
Vol 8 (6) ◽  
Author(s):  
Avilash Carpenter ◽  
M.K. Gupta ◽  
Neetesh Kumar Jain ◽  
Urvashi Sharma ◽  
Rahul Sisodiya
Keyword(s):  
Mechanical Strength ◽  
Standard Procedure ◽  
Flow Property ◽  
Storage Conditions ◽  
Angle Of Repose ◽  
Dissolution Time ◽  
Disintegration Time ◽  
Powder Blend ◽  
Standard Curve ◽  
The Stability

Aim: The main of the study is to formulate and develop orally disintegrating fast dissolving tablet of Metoclopramide hydrochloride. Material & Methods: Before formulation and development of selected drug, the standard curve in buffer was prepared and absorbance at selected maxima was taken. Then two different disintegrating agents were selected and drug was mixed with disintegrating agents in different ratio. Various Preformulation parameters and evaluation of tablet i.e. disintegration time, dissolution time, friability, hardness, thickness were measured by standard procedure. Result & Discussion: The angle of repose for all the batches prepared. The values were found to be in the range of 30.46 to 36.45, which indicates good flow property for the powder blend according to the USP. The bulk density and tapped density for all the batches varied from 0.49 to 0.54 g/mL and 0.66 to 0.73, respectively. Carr’s index values were found to be in the range of 23.33 to 25.88, which is satisfactory for the powders as well as implies that the blends have good compressibility. Hausner ratio values obtained were in the range of 1.22 to 1.36, which shows a passable flow property for the powder blend based on the USP. The results for tablet thickness and height for all batches was found to range from 4.45 to 4.72 mm and 3.67 to 3.69 mm, respectively. Hardness or breaking force of tablets for all batches was found to range from 32.8 to 36.2 N. Tablet formulations must show good mechanical strength with sufficient hardness in order to handle shipping and transportation. Friability values for all the formulations were found to be in the range of 0.22 % to 0.30 %. Conclusion: Orally disintegrating tablets were compressed in order to have sufficient mechanical strength and integrity to withstand handling, shipping and transportation. The formulation was shown to have a rapid disintegration time that complied with the USP (less than one minute). The data obtained from the stability studies indicated that the orally disintegrating mini-tablets of MTH were stable under different environmental storage conditions. Keywords: Formulation & Development, Fast Dissolving Tablet, Metoclopramide, Anti-Emetic Drug, Oral Disintegrating Tablet

Plasma Enhanced Chemical Vapor Deposition of Porous Organosilicate Glass ILD Films With k ≤ 2.4.

2003 ◽  
Vol 766 ◽  
Author(s):  
Raymond N. Vrtis ◽  
Mark L. O'Neill ◽  
Jean L. Vincent ◽  
Aaron S. Lukas ◽  
Brian K. Peterson ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Chemical Vapor Deposition ◽  
Mechanical Strength ◽  
Thermal Annealing ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Organosilicate Glass

AbstractWe report on our work to develop a process for depositing nanoporous organosilicate (OSG) films via plasma enhanced chemical vapor deposition (PECVD). This approach entails codepositing an OSG material with a plasma polymerizable hydrocarbon, followed by thermal annealing of the material to remove the porogen, leaving an OSG matrix with nano-sized voids. The dielectric constant of the final film is controlled by varying the ratio of porogen precursor to OSG precursor in the delivery gas. Because of the need to maintain the mechanical strength of the final material, diethoxymethylsilane (DEMS) is utilized as the OSG precursor. Utilizing this route we are able to deposit films with a dielectric constant of 2.55 to 2.20 and hardness of 0.7 to 0.3 GPa, respectively.

DMV 59

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract DMV 59 is the material of choice for a wide variety of applications where significant corrosion resistance and high mechanical strength is necessary. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-672. Producer or source: Mannesmann DMV Stainless USA Inc.

DURCOMET 100

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Mechanical Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Annealed Condition ◽  
Excellent Corrosion Resistance ◽  
Wide Range ◽  
Very High

Abstract Durcomet 100 is an improved version of Alloy CD-4 MCu with better corrosion and wear resistance. The alloy is used in the annealed condition and possesses excellent corrosion resistance over a wide range of corrosion environments. Mechanical strength is also very high. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-540. Producer or source: Duriron Company Inc.

BOFORS 2RM2

Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cast Steel ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract BOFORS 2RM2 is a hardenable stainless cast steel having good weldability, high mechanical strength and improved corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: SS-169. Producer or source: Aktiebolaget Bofors.

Sign in / Sign up

Export Citation Format

Share Document