Aerodynamic Investigation of Double Surface Airfoil

2021 ◽  
Vol 1 (2) ◽  
pp. 41-46
Author(s):  
Siva J ◽  
Suresh C ◽  
Paramaguru V
Keyword(s):  
Experimental Investigation ◽  
Flow Separation ◽  
Research Work ◽  
Aerodynamic Performance ◽  
Aircraft Industry ◽  
Aerodynamic Efficiency ◽  
Flight Vehicles ◽  
Double Surface ◽  
Naca 0012 ◽  
Aerodynamic Investigation

Aircraft industry has been deeply concerned about reduction of drag by reducing flow separation and improving the aerodynamic efficiency of flight vehicles, particularly in commercial and military market by adopting various methods. Reduction of flow separation is a concept by which we can increase aerodynamic efficiency. The purpose of the project is to perform an experimental investigation on aerodynamic performance of NACA 0012 airfoil model with and without splits. It is evident from this research work that the airfoil model with split possesses greater aerodynamic performance by producing lesser overall drag. This is due to the delay in flow separation from the surface.

scholarly journals Experimental investigation of flow separation in a planar convergent-divergent nozzle

2019 ◽  
Vol 1300 ◽  
pp. 012088
Author(s):  
Yaohua Li ◽  
Chengjun He ◽  
Jianqiang Li ◽  
Lei Miao ◽  
Rongzhao Gao ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Flow Separation

scholarly journals Experimental Investigation on the Aerodynamic Performance of NLF-0414 Iced-Airfoil

2016 ◽  
Vol 9 (2) ◽  
pp. 587-592 ◽  
Author(s):  
abbas ebrahimi ◽  
majid hajipour ◽  
Hossein Hasheminasa ◽  
◽  
◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Aerodynamic Performance

scholarly journals Double multiple stream tube theory coupled with dynamic stall and wake correction for aerodynamic investigation of vertical axis wind turbine

2020 ◽  
Vol 23 (4) ◽  
pp. 771-780
Author(s):  
Anh Ngoc VU ◽  
Ngoc Son Pham
Keyword(s):  
Wind Turbine ◽  
Shape Function ◽  
Vertical Axis ◽  
Transformation Method ◽  
Aerodynamic Performance ◽  
Dynamic Stall ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Stream Tube ◽  
Aerodynamic Investigation

This study describes an effectively analytic methodology to investigate the aerodynamic performance of H vertical axis wind turbine (H-VAWT). An in-house code based on double multiple stream tube theory (DMST) coupled with dynamic stall and wake correction is implemented to estimate the power coefficient. Design optimization of airfoil shape is conducted to study the influences of the dynamic stall and turbulent wakes. Airfoil shape is universally investigated by using the Class/Shape function transformation method. The airfoil study shows that the upper curve tends to be less convex than the lower curve in order to extract more energy of the wind upstream and generate less drag of the blade downstream. The optimal results show that the power coefficient increases by 6.5% with the new airfoil shape.

scholarly journals Biomechanics of the unique pterosaur pteroid

2009 ◽  
Vol 277 (1684) ◽  
pp. 1121-1127 ◽  
Author(s):  
Colin Palmer ◽  
Gareth J. Dyke
Keyword(s):  
Leading Edge ◽  
Aerodynamic Performance ◽  
Biomechanical Analysis ◽  
Aerodynamic Efficiency ◽  
Fourth Finger ◽  
Forward Part ◽  
The Way

Pterosaurs, flying reptiles from the Mesozoic, had wing membranes that were supported by their arm bones and a super-elongate fourth finger. Associated with the wing, pterosaurs also possessed a unique wrist bone—the pteroid—that functioned to support the forward part of the membrane in front of the leading edge, the propatagium. Pteroid shape varies across pterosaurs and reconstructions of its orientation vary (projecting anteriorly to the wing leading edge or medially, lying alongside it) and imply differences in the way that pterosaurs controlled their wings. Here we show, using biomechanical analysis and considerations of aerodynamic efficiency of a representative ornithocheirid pterosaur, that an anteriorly orientated pteroid is highly unlikely. Unless these pterosaurs only flew steadily and had very low body masses, their pteroids would have been likely to break if orientated anteriorly; the degree of movement required for a forward orientation would have introduced extreme membrane strains and required impractical tensioning in the propatagium membrane. This result can be generalized for other pterodactyloid pterosaurs because the resultant geometry of an anteriorly orientated pteroid would have reduced the aerodynamic performance of all wings and required the same impractical properties in the propatagium membrane. We demonstrate quantitatively that the more traditional reconstruction of a medially orientated pteroid was much more stable both structurally and aerodynamically, reflecting likely life position.

scholarly journals Effect of Single-Row and Double-Row Passive Vortex Generators on the Deep Dynamic Stall of a Wind Turbine Airfoil

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2535
Author(s):  
Chengyong Zhu ◽  
Tongguang Wang ◽  
Jie Chen ◽  
Wei Zhong
Keyword(s):  
Wind Turbine ◽  
Flow Separation ◽  
Aerodynamic Performance ◽  
Vortex Generators ◽  
Dynamic Stall ◽  
Aerodynamic Forces ◽  
Double Row ◽  
Single Row ◽  
Maximum Angle ◽  
Wind Turbine Airfoil

Passive vortex generators (VGs) have been widely applied on wind turbines to boost the aerodynamic performance. Although VGs can delay the onset of static stall, the effect of VGs on dynamic stall is still incompletely understood. Therefore, this paper aims at investigating the deep dynamic stall of NREL S809 airfoil controlled by single-row and double-row VGs. The URANS method with VGs fully resolved is used to simulate the unsteady airfoil flow. Firstly, both single-row and double-row VGs effectively suppress the flow separation and reduce the fluctuations in aerodynamic forces when the airfoil pitches up. The maximum lift coefficient is therefore increased beyond 40%, and the onset of deep dynamic stall is also delayed. This suggests that deep dynamic-stall behaviors can be properly controlled by VGs. Secondly, there is a great difference in aerodynamic performance between single-row and double-row VGs when the airfoil pitches down. Single-row VGs severely reduce the aerodynamic pitch damping by 64%, thereby undermining the torsional aeroelastic stability of airfoil. Double-row VGs quickly restore the decreased aerodynamic efficiency near the maximum angle of attack, and also significantly accelerate the flow reattachment. The second-row VGs can help the near-wall flow to withstand the adverse pressure gradient and then suppress the trailing-edge flow separation, particularly during the downstroke process. Generally, double-row VGs are better than single-row VGs concerning controlling deep dynamic stall. This work also gives a performance assessment of VGs in controlling the highly unsteady aerodynamic forces of a wind turbine airfoil.

Experimental analysis of cell pattern on grid fin aerodynamics in subsonic flow

2019 ◽  
Vol 234 (3) ◽  
pp. 537-562
Author(s):  
Manish Tripathi ◽  
Mahesh M Sucheendran ◽  
Ajay Misra
Keyword(s):  
Subsonic Flow ◽  
Lift Coefficient ◽  
Aerodynamic Performance ◽  
Aerodynamic Efficiency ◽  
Grid Fin ◽  
Stall Angle ◽  
The Individual ◽  
The Impact ◽  
Control Surfaces

Grid fins consisting of a lattice of high aspect ratio planar members encompassed by an outer frame are unconventional control surfaces used on numerous missiles and bombs due to their enhanced lifting characteristics at high angles of attack and across wider Mach number regimes. The current paper accomplishes and compares the effect of different grid fin patterns on subsonic flow aerodynamics of grid fins by virtue of the determination of their respective aerodynamic forces. Furthermore, this study deliberates the impact of gap variation on aerodynamics of different patterns. Results enunciate enhanced aerodynamic efficiency, and lift slope for web-fin cells and single diamond patterns compared to the baseline model. Moreover, the study indicates improved aerodynamic performance for diamond patterns with higher gaps by providing elevated maximum lift coefficient, delayed stall angle, and comparable drag at lower angles. The study established the presence of an additional effect termed as the inclination effect alongside the cascade effect leading to deviations with respect to lift, stall, and aerodynamic efficiency amongst different gap variants of the individual patterns. Thus, optimization based on the aerodynamic efficiency, stall angle requirements, and construction cost by optimum pattern and gap selection can be carried out through this analysis, which can lead to elevated aerodynamic performance for grid fins.

Sign in / Sign up

Export Citation Format

Share Document