scholarly journals Testing Whole Building LCA: Research and Practice

Author(s):  
Kathrina Simonen ◽  

Research and Practice Environmental Life Cycle Assessment (LCA) can be used to evaluate the environmental impacts of a building resulting from manufacturing, construction, operation and maintenance and the end of life demolition and disposal/re-use. Tracking impacts such as greenhouse gas emissions and smog formation, LCA can enable comparison of building proposals testing options of material use, system selection and system performance.

Clean Energy ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 765-778
Author(s):  
Dawid P Hanak

Abstract Industrial decarbonization is crucial to keeping the global mean temperature <1.5°C above pre-industrial levels. Although unabated coal use needs to be phased out, coal is still expected to remain an important source of energy in power and energy-intensive industries until the 2030s. Decades of coal exploration, mining and processing have resulted in ~30 billion tonnes of waste-coal tailings being stored in coal impoundments, posing environmental risks. This study presents an environmental life-cycle assessment of a coal-processing technology to produce coal pellets from the waste coal stored in impoundments. It has been shown that the waste-coal pellets would result in the cradle-to-gate global warming of 1.68–3.50 kgCO2,eq/GJch, depending on the source of electricity used to drive the process. In contrast, the corresponding figure for the supply of conventional coal in the US was estimated to be 12.76 kgCO2,eq/GJch. Such a reduction in the global-warming impact confirms that waste-coal pellets can be a viable source of energy that will reduce the environmental impact of the power and energy-intensive industries in the short term. A considered case study showed that complete substitution of conventional coal with the waste-coal pellets in a steelmaking plant would reduce the greenhouse-gas emissions from 2649.80 to 2439.50 kgCO2,eq/tsteel. This, in turn, would reduce the life-cycle greenhouse-gas emissions of wind-turbine manufacturing by ≤8.6%. Overall, this study reveals that the use of waste-coal pellets can bring a meaningful reduction in industrial greenhouse-gas emissions, even before these processes are fully decarbonized.


Author(s):  
Anna Elena Scholz ◽  
Dimitar Trifonov ◽  
Mirko Hornung

AbstractNoise and greenhouse gas emission targets set by e.g., the EU commission, NASA, and ICAO oblige the aviation industry to reduce its environmental footprint. Battery-powered hybrid-electric aircraft are currently being investigated in this regard as they can potentially reduce in-flight greenhouse gas emissions and noise. However, most studies to date have focused on the CO2 emission reduction potential instead of considering the total life cycle environmental impact. Hence, within this study an environmental life cycle assessment method for a hybrid-electric aircraft is developed and applied, supplemented by a direct operating costs analysis. This allows the simultaneous evaluation of the environmental impact reduction potential and the economic consequences for aircraft operators. This demonstrates the faced trade-off and contributes to a meaningful review process. A single-aisle transport aircraft (A320 class) serves as a use case for the established methodology. It consists of the conceptual aircraft design, the environmental life cycle assessment, and the direct operating costs analysis for a conventional reference aircraft and a hybrid-electric aircraft with a discrete parallel powertrain architecture. It should be noticed that the focus of this study is the comparison of conceptual aircraft designs of the same fidelity on system level, in lieu of the detailed modeling of a hybrid-electric aircraft. Results show that for a degree of hybridization of 0.3, the environmental impact of the hybrid-electric configuration increased by $$15.1\%$$ 15.1 % , while the operating costs increased by $$41.0\%$$ 41.0 % compared to a conventional reference aircraft. For a future scenario, favourable for hybrid-electric aircraft with i.a. renewable electricity production, the environmental impact could be reduced by $$7.0\%$$ 7.0 % compared to the reference aircraft. At the same time, the operating costs gap between both configurations decreases to $$+ 26.8\%$$ + 26.8 % . Hybrid-electric aircraft should therefore be investigated further as a potential solution to reduce the environmental impact of aviation, if simultaneously to developing them the expansion of renewable energies is fostered. Nevertheless, this reduction in environmental impact involves a high direct operating costs penalty.


2018 ◽  
Author(s):  
Alexandra LUCA ◽  
David SANCHEZ DOMENE ◽  
Francisca ARAN AIS

2021 ◽  
Vol 174 ◽  
pp. 105774
Author(s):  
Edward Ren Kai Neo ◽  
Gibson Chin Yuan Soo ◽  
Daren Zong Loong Tan ◽  
Karina Cady ◽  
Kai Ting Tong ◽  
...  

Author(s):  
M. von der Thannen ◽  
S. Hoerbinger ◽  
C. Muellebner ◽  
H. Biber ◽  
H. P. Rauch

AbstractRecently, applications of soil and water bioengineering constructions using living plants and supplementary materials have become increasingly popular. Besides technical effects, soil and water bioengineering has the advantage of additionally taking into consideration ecological values and the values of landscape aesthetics. When implementing soil and water bioengineering structures, suitable plants must be selected, and the structures must be given a dimension taking into account potential impact loads. A consideration of energy flows and the potential negative impact of construction in terms of energy and greenhouse gas balance has been neglected until now. The current study closes this gap of knowledge by introducing a method for detecting the possible negative effects of installing soil and water bioengineering measures. For this purpose, an environmental life cycle assessment model has been applied. The impact categories global warming potential and cumulative energy demand are used in this paper to describe the type of impacts which a bioengineering construction site causes. Additionally, the water bioengineering measure is contrasted with a conventional civil engineering structure. The results determine that the bioengineering alternative performs slightly better, in terms of energy demand and global warming potential, than the conventional measure. The most relevant factor is shown to be the impact of the running machines at the water bioengineering construction site. Finally, an integral ecological assessment model for applications of soil and water bioengineering structures should point out the potential negative effects caused during installation and, furthermore, integrate the assessment of potential positive effects due to the development of living plants in the use stage of the structures.


2021 ◽  
pp. 128580
Author(s):  
Ioan-Robert Istrate ◽  
Rafael Juan ◽  
Mario Martin-Gamboa ◽  
Carlos Domínguez ◽  
Rafael A. García-Muñoz ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document