DESAIN DAN ANALISIS KEKUATAN TANGKI FIRE WATER STORAGE TANK TIPE FIX CONE ROOF KAPASITAS 1500 KL DENGAN PERHITUNGAN AKTUAL DAN SIMULASI SOFTWARE

2021 ◽  
Vol 26 (1) ◽  
pp. 69-78
Author(s):  
Aji Abdillah Kharisma ◽  
Ahmad Fadel Givari ◽  
Irvan Septyan Mulyana
Keyword(s):  
Yield Strength ◽  
Internal Pressure ◽  
Safety Factor ◽  
Storage Tank ◽  
Water Storage ◽  
Von Mises Stress ◽  
Data Input ◽  
Simulation Data ◽  
Water Storage Tank ◽  
Von Mises

Storage tank adalah alat yang dibutuhkan dalam industri minyak bumi dan gas. Fungsi dari storage tank ialah untuk menyimpan fluida dalam jumlah yang besar. Tangki timbun harus memiliki dinding yang kuat untuk menahan suatu tekanan, maka tangki tersebut tidak mengalami kerusakan. Penelitian ini membahas tentang kekuatan desain fire water storage tank, dari kriteria faktor keamanan, von misses, dan displacement. Metode yang digunakan adalah metode perhitungan actual dan metode analysis simulasi (analysis simulation). Data input desain shell diberi internal pressure sebesar (1 atm) atau (0,101325 MPa), pada hasil simulasi solidworks didapatkan nilai dari von mises stress sebesar (150,49 MPa), safety factor (1,36), dan displacement (5,95 mm). Hasil metode perhitungan aktual didapatkan nilai von mises sebesar (155,245 MPa), safety factor (1,32), dan displacement (4,274 mm). Berdasarkan hasil analisa desain dari storage tank dapat dinyatakan aman digunakan dikarenakan nilai von mises berada dibawah nilai yield strength (205 MPa), safety factor berada pada kisaran (1-10), serta displacement yang tidak terlalu signifikan.

scholarly journals AP1000 Shield Building Dynamic Response for Different Water Levels of PCCWST Subjected to Seismic Loading considering FSI

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Daogang Lu ◽  
Yu Liu ◽  
Xiaojia Zeng
Keyword(s):  
Storage Tank ◽  
Seismic Analysis ◽  
Cooling System ◽  
Water Storage ◽  
Seismic Loading ◽  
Water Levels ◽  
Von Mises Stress ◽  
Fe Model ◽  
Water Storage Tank ◽  
Von Mises

Huge water storage tank on the top of many buildings may affect the safety of the structure caused by fluid-structure interaction (FSI) under the earthquake. AP1000 passive containment cooling system water storage tank (PCCWST) placed at the top of shield building is a key component to ensure the safety of nuclear facilities. Under seismic loading, water will impact the wall of PCCWST, which may pose a threat to the integrity of the shield building. In the present study, an FE model of AP1000 shield building is built for the modal and transient seismic analysis considering the FSI. Six different water levels in PCCWST were discussed by comparing the modal frequency, seismic acceleration response, and von Mises stress distribution. The results show the maximum von Mises stress emerges at the joint of shield building roof and water around the air inlet. However, the maximum von Mises stress is below the yield strength of reinforced concrete. The results may provide a reference for design of the AP1000 and CAP1400 in the future.

Energy-saving analysis of air source heat pump integrated with a water storage tank for heating applications

2020 ◽  
Vol 180 ◽  
pp. 107029
Author(s):  
Pin Wu ◽  
Zhichao Wang ◽  
Xiaofeng Li ◽  
Zhaowei Xu ◽  
Yingxia Yang ◽  
...  
Keyword(s):  
Energy Saving ◽  
Heat Pump ◽  
Storage Tank ◽  
Water Storage ◽  
Water Storage Tank ◽  
Air Source Heat Pump

scholarly journals The effect of household storage tanks/vessels and user practices on the quality of water: a systematic review of literature

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Musa Manga ◽  
Timothy G. Ngobi ◽  
Lawrence Okeny ◽  
Pamela Acheng ◽  
Hidaya Namakula ◽  
...  
Keyword(s):  
Systematic Review ◽  
Water Quality ◽  
Storage Tank ◽  
Grey Literature ◽  
Water Storage ◽  
Storage Tanks ◽  
Water Storage Tank ◽  
Hygiene Practices ◽  
Quality Of Water ◽  
Vessel Material

Abstract Background Household water storage remains a necessity in many communities worldwide, especially in the developing countries. Water storage often using tanks/vessels is envisaged to be a source of water contamination, along with related user practices. Several studies have investigated this phenomenon, albeit in isolation. This study aimed at developing a systematic review, focusing on the impacts of water storage tank/vessel features and user practices on water quality. Methods Database searches for relevant peer-reviewed papers and grey literature were done. A systematic criterion was set for the selection of publications and after scrutinizing 1106 records, 24 were selected. These were further subjected to a quality appraisal, and data was extracted from them to complete the review. Results and discussion Microbiological and physicochemical parameters were the basis for measuring water quality in storage tanks or vessels. Water storage tank/vessel material and retention time had the highest effect on stored water quality along with age, colour, design, and location. Water storage tank/vessel cleaning and hygiene practices like tank/vessel covering were the user practices most investigated by researchers in the literature reviewed and they were seen to have an impact on stored water quality. Conclusions There is evidence in the literature that storage tanks/vessels, and user practices affect water quality. Little is known about the optimal tank/vessel cleaning frequency to ensure safe drinking water quality. More research is required to conclusively determine the best matrix of tank/vessel features and user practices to ensure good water quality.

scholarly journals Minimum Number of Experimental Data for the Thermal Characterization of a Hot Water Storage Tank

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4741
Author(s):  
María Gasque ◽  
Federico Ibáñez ◽  
Pablo González-Altozano
Keyword(s):  
Experimental Data ◽  
Water Temperature ◽  
Temperature Profile ◽  
Storage Tank ◽  
Water Storage ◽  
Hot Water ◽  
Experimental Temperature ◽  
Inlet Temperature ◽  
Water Storage Tank ◽  
Minimum Number

This paper demonstrates that it is possible to characterize the water temperature profile and its temporal trend in a hot water storage tank during the thermal charge process, using a minimum number of thermocouples (TC), with minor differences compared to experimental data. Four experimental tests (two types of inlet and two water flow rates) were conducted in a 950 L capacity tank. For each experimental test (with 12 TC), four models were developed using a decreasing number of TC (7, 4, 3 and 2, respectively). The results of the estimation of water temperature obtained with each of the four models were compared with those of a fifth model performed with 12 TC. All models were tested for constant inlet temperature. Very acceptable results were achieved (RMSE between 0.2065 °C and 0.8706 °C in models with 3 TC). The models were also useful to estimate the water temperature profile and the evolution of thermocline thickness even with only 3 TC (RMSE between 0.00247 °C and 0.00292 °C). A comparison with a CFD model was carried out to complete the study with very small differences between both approaches when applied to the estimation of the instantaneous temperature profile. The proposed methodology has proven to be very effective in estimating several of the temperature-based indices commonly employed to evaluate thermal stratification in water storage tanks, with only two or three experimental temperature data measurements. It can also be used as a complementary tool to other techniques such as the validation of numerical simulations or in cases where only a few experimental temperature values are available.

scholarly journals The effect of fillet radius and length of the thick-walled cylinder on Von Mises stress and safety factor for rocket motor case

2020 ◽  
Author(s):  
Lasinta Ari Nendra Wibawa ◽  
Kuncoro Diharjo ◽  
Wijang Wisnu Raharjo ◽  
Bagus Hayatul Jihad
Keyword(s):  
Safety Factor ◽  
Rocket Motor ◽  
Von Mises Stress ◽  
Fillet Radius ◽  
Von Mises ◽  
Walled Cylinder
Sign in / Sign up

Export Citation Format

Share Document