scholarly journals Aerodynamic Performances of Small Scale Horizontal Axis Wind Turbine Blades for Applications in Malaysia

2019 ◽  
Vol 8 (4) ◽  
pp. 9557-9562
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Power Efficiency ◽  
Energy Production ◽  
Turbine Blades ◽  
Maximum Power ◽  
Small Scale ◽  
Wind Condition ◽  
Horizontal Axis Wind Turbine

Wind energy is one of the most viable options for clean and sustainable energy production. In Malaysia where wind source has been considered scarce, the capacity of installed wind energy production is very low. However, studies have shown that it is worthwhile to produce wind energy at several potential sites in this country. For this purpose, it is crucial that the designed turbine blade gives the highest possible blade power efficiency while structure wise, the turbine blade need to be effective in terms of avoiding possible failures. The maximum power efficiency means the blade does not only provide profile that gives maximum sliding ratio but also it must operate at the corresponding angle of attack, 𝜶𝒎𝒂𝒙 that gives this ratio. At the same time, the blade must be small enough to have low weight to allow it to self-start in the low wind region. In this paper, the study is focused on the aerodynamic aspect of the design of wind turbine blade that will give the maximum power efficiency. Four factors that determine aerodynamic performance of the turbine blades are discussed: the wind condition, the airfoil profile, the blade geometry and the losses. In most of the factor, adjustments are made such that the blade operates at around the 𝜶𝒎𝒂𝒙 so that the sliding ratio and thus power coefficient are maximum.

Machine Learning Aided Prediction of Rain Erosion Damage on Wind Turbine Blade Sections

2021 ◽  
Author(s):  
Alessio Castorrini ◽  
Paolo Venturini ◽  
Fabrizio Gerboni ◽  
Alessandro Corsini ◽  
Franco Rispoli
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Energy Production ◽  
Turbine Blades ◽  
Wind Farms ◽  
Wind Turbine Blade ◽  
Wind Turbine Blades ◽  
Coating Materials ◽  
Erosion Modelling ◽  
Rain Erosion

Abstract Rain erosion of wind turbine blades represents an interesting topic of study due to its non-negligible impact on annual energy production of the wind farms installed in rainy sites. A considerable amount of recent research works has been oriented to this subject, proposing rain erosion modelling, performance losses prediction, structural issues studies, etc. This work aims to present a new method to predict the damage on a wind turbine blade. The method is applied here to study the effect of different rain conditions and blade coating materials, on the damage produced by the rain over a representative section of a reference 5MW turbine blade operating in normal turbulence wind conditions.

scholarly journals Investigation of an Innovative Rotor Modification for a Small-Scale Horizontal Axis Wind Turbine

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2649 ◽  
Author(s):  
Artur Bugała ◽  
Olga Roszyk
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Cfd Simulation ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Small Scale ◽  
Horizontal Axis Wind Turbine ◽  
Airflow Distribution

This paper presents the results of the computational fluid dynamics (CFD) simulation of the airflow for a 300 W horizontal axis wind turbine, using additional structural elements which modify the original shape of the rotor in the form of multi-shaped bowls which change the airflow distribution. A three-dimensional CAD model of the tested wind turbine was presented, with three variants subjected to simulation: a basic wind turbine without the element that modifies the airflow distribution, a turbine with a plano-convex bowl, and a turbine with a centrally convex bowl, with the hyperbolic disappearance of convexity as the radius of the rotor increases. The momentary value of wind speed, recorded at measuring points located in the plane of wind turbine blades, demonstrated an increase when compared to the base model by 35% for the wind turbine with the plano-convex bowl, for the wind speed of 5 m/s, and 31.3% and 49% for the higher approaching wind speed, for the plano-convex bowl and centrally convex bowl, respectively. The centrally convex bowl seems to be more appropriate for higher approaching wind speeds. An increase in wind turbine efficiency, described by the power coefficient, for solutions with aerodynamic bowls was observed.

scholarly journals Second-generation composites from recycled wind turbine blades

2019 ◽  
Author(s):  
Azadeh Tavousi Tabatabaei ◽  
Seyed Hossein Mamanpush
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Second Generation ◽  
Turbine Blades ◽  
Clean Energy ◽  
Wind Turbine Blades ◽  
Environmental Attributes ◽  
The Us ◽  
The World

The demand for wind and other forms of clean energy is increasing in the US and throughout the world. Wind energy is also expected to provide 14.9% of the global electricity demand by 2020. Under this scenario, a significant amount of wind turbine blades (WTBs) will continue to burden our current landfills until a viable recycling strategy is found. Repurposing or recycling of end- of-use wind turbine blade material will provide both economic and environmental attributes.

Preliminary Design of Wind Turbine Blades for Manufacture Using Local Capabilities

2001 ◽  
Author(s):  
Sarim N. Al-Zubaidy ◽  
Jacqueline Bridge ◽  
Alwyn Johnson
Keyword(s):  
Energy Source ◽  
Growth Rate ◽  
Wind Energy ◽  
Wind Turbine ◽  
Fluid Dynamic ◽  
Turbine Blades ◽  
Design Procedure ◽  
Wind Turbine Blades ◽  
Horizontal Axis Wind Turbine ◽  
Average Deviation

Abstract In the past ten to fifteen years wind energy remerged on the world scene with a very healthy growth rate, it has outstripped photovoltaics (solar cells) as the world’s fastest growing energy source, with a growth rate in excess of 30 percent per annum. No longer just a “nice idea for the future” Wind energy is becoming a mainstream energy source for many countries. The proposed paper will present a procedure (using numerical methods) for the design and analysis of Horizontal Axis Wind Turbine (HAWT) rotors. To ascertain the accuracy and to determine where further improvements could be initiated; numerical findings were then compared with published experimental test data and the compression showed an average deviation of less than 3% and therefore the simplifying assumptions made for the prediction of fluid behavior over an airfoil section was justified. Once the approach was validated and standardised a comprehensive airfoil design was produced. A computational fluid dynamic code coupled with a simple numerical algorithm aided the inverse design procedure. The final design was well proportioned and was theoretically able to meet the stated objective function and satisfied all the imposed constraints (manufacturing and geometrical). The geometrical data was then generated in a form suitable for manufacture using manually and numerically controlled machines.

Unsteady Flow Analysis Around an Elliptic-Bladed Savonius-Style Wind Turbine

2014 ◽  
Author(s):  
Abhisek Banerjee ◽  
Sukanta Roy ◽  
Prasenjit Mukherjee ◽  
Ujjwal K. Saha
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Turbine Blades ◽  
Flow Analysis ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Small Scale ◽  
Circular Design

Although considerable progress has already been achieved in the design of wind turbines, the available technical designs are not yet adequate to develop a reliable wind energy converter especially meant for small-scale applications. The Savonius-style wind turbine appears to be particularly promising for the small-scale applications because of its design simplicity, good starting ability, insensitivity to wind directions, relatively low operating speed, low cost and easy installation. However, its efficiency is reported to be inferior as compared to other wind turbines. Aiming for that, a number of investigations have been carried out to increase the performance of this turbine with various blade shapes. In the recent past, investigations with different blade geometries show that an elliptic-bladed turbine has the potential to harness wind energy more efficiently. In view of this, the present study attempts to assess the performance of an elliptic-bladed Savonius-style wind turbine using 2D unsteady simulations. The SST k-ω turbulence model is used to simulate the airflow over the turbine blades. The power and torque coefficients are calculated at rotating conditions, and the results obtained are validated with the wind tunnel experimental data. Both the computational and experimental studies indicate a better performance with the elliptical blades. Further, the present analysis also demonstrates improved flow characteristics of the elliptic-bladed turbine over the conventional semi-circular design.

scholarly journals Evaluation of wind energy potential for different regions in Lebanon based on NASA wind speed database

2021 ◽  
Vol 926 (1) ◽  
pp. 012093
Author(s):  
Y Kassem ◽  
H Çamur ◽  
M A H A Abdalla ◽  
B D Erdem ◽  
A M R Al-ani
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Vertical Axis ◽  
Small Scale ◽  
Renewable Energy Resources ◽  
Vertical Axis Wind Turbine ◽  
Energy Potential ◽  
Horizontal Axis Wind Turbine ◽  
Wind Energy Potential

Abstract The grid-connected system can be an attractive solution to reduce electricity consumption, dependence on utility power, and increase electricity generation from renewable energy resources like wind energy for residential electricity users. Based on 33-year wind data (1983-2020), this study investigates the potential of wind energy at different locations ((Akkar, Baalbek, Beirut, Zahlé, Baabda, Nabatieh, Tripoli, and Sidon) in Lebanon using the Weibull distribution function. Monthly NASA wind speed data during the period (1983-2020) were used to estimate the wind energy potential. The result showed that the averaged wind speeds at the selected regions are varied from 3.695m/s to 4.457m/s at the height of 10m. Furthermore, the annual wind power density was estimated at various heights (10m, 30m, and 50m). The results demonstrated that small-scale wind turbines are recommended to be used for generating electricity from wind in the selected regions. Finally, the performance of WRE.060 / 6 kW (vertical axis wind turbine) and Proven WT 6000 (horizontal axis wind turbine) was done based on the monthly NASA wind speed database.

scholarly journals Wind Energy Potential on A Highrise Building: A Preliminary Study

2021 ◽  
Vol 88 (3) ◽  
pp. 20-30
Author(s):  
Nofirman Firdaus ◽  
Bambang Teguh Prasetyo ◽  
Hasnida Ab-Samat ◽  
Prayudi ◽  
Hendri ◽  
...  
Keyword(s):  
Wind Energy ◽  
Weibull Distribution ◽  
Wind Turbine ◽  
Energy Production ◽  
Energy Resource ◽  
Limited Area ◽  
Wake Effect ◽  
Horizontal Axis Wind Turbine ◽  
High Rise ◽  
Power Curves

Indonesia has an abundant renewable energy source. One of them is wind energy resources. Unfortunately, Indonesia's wind energy resource is not fully utilized, especially for application in high-rise buildings. The paper investigates the potential of energy production from the horizontal-axis wind turbine (HAWT) and the vertical-axis wind turbine (VAWT) on the rooftop of a university building in Indonesia. The wind speed data were measured on the rooftop of the building for seven months. The data was analyzed using Weibull distribution. Based on the probability density function of the Weibull distribution, the potential energy production was calculated using the power curves from the manufacturer. Comparing energy production between HAWTs and VAWTs has shown that VAWTs can produce more energy than HAWTs. Using six turbines, VAWTs can produce 48,476 kWh. On the other hand, with four turbines, HAWTs can produce 41,729 kWh. The reason is that VAWT requires shorter distance requirements for inter-turbine and between rows. Therefore, VAWT can use more turbines than HAWT in the limited area. In conclusion, VAWT for high-rise buildings is more preferred because VAWT can generate more energy. Further study should investigate the optimal configuration with varying the wind direction and quantifying the wake effect on power output.

Experimental Testing of Periodic Roughness Elements on a Small Scale Wind Turbine Blade

2010 ◽  
Author(s):  
Jason R. Gregg ◽  
Kenneth W. Van Treuren
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Experimental Testing ◽  
Turbine Blades ◽  
Wind Turbine Blade ◽  
Speed Ratio ◽  
Small Scale ◽  
Turbine Performance ◽  
Roughness Elements

When studied in large wind turbines, roughness on wind turbine blades has been shown to decrease wind turbine performance by up to 50%. However, during wind turbine testing in the Baylor University Subsonic Wind Tunnel, roughness effects that were an artifact of the blade manufacturing process led to a significant power increase over smooth blades at the design wind speed of 10 mph. These results have led to an investigation of the effects of roughness on wind turbine performance under a flow condition with local Reynolds numbers ranging from 14,200 to 58,800. It was found that under these flow conditions the roughness can improve measured power output by up to 126% when compared with a smooth blade. This paper examines the conditions where roughness can positively affect the operation of a wind turbine by testing a 500 mm diameter, horizontal axis, three blade, fixed pitch wind turbine system in a wind tunnel. The experiments have been carried out on a single direct-drive wind turbine model and a single blade design using the NREL designed S818 airfoil. The design point for the blades tested is 10 miles per hour, with a tip speed ratio of 7. Roughness can be an effective treatment when used at or near the stall speed of the wind turbine blade for lower Reynolds number conditions. The roughness elements tested were both perpendicular to and along the flow lines. These blades were then compared to a blade configuration without roughness elements.

Sign in / Sign up

Export Citation Format

Share Document