scholarly journals UTILIZATION OF MARBLE WASTE IN LIGHTWEIGHT CONCRETE REPLACING FINE AGGREGATES: A REVIEW

2020 ◽  
pp. 1-2
Author(s):  
Mauli G. Joshi ◽  
Jayeshkumar R. Pitroda*
Keyword(s):  
Lightweight Concrete ◽  
Earthquake Damage ◽  
Hardened Concrete ◽  
Light Weight ◽  
Concrete Properties ◽  
Fine Aggregates ◽  
Material Utilization ◽  
Light Weight Aggregate ◽  
Marble Waste ◽  
Marble Industry

major uster problem today is related to disposal of waste generated in the industry and to nd solution of reusing it. The marble industry produce desirable wastes, irrespective of improvements introduced in the 65% during manufacturing and 30% during cutting process. This study deals with reviewing the use of waste from marble industry in light-weight aggregate and the effect on fresh and hardened concrete properties. Light weight concrete reduce DL and overall cost as compare to concrete. These are basically cold materials which will helps to decrease Indore temp.Waste material utilization helps to maintain cleanliness. Lightweight concrete is porous which helps to control ood water and also the earthquake damage due to its light self-weight

scholarly journals Strength Behavior of Pumice Stone Lightweight Concrete Beam in Contrast with Reinforced Concrete Beam

2019 ◽  
Vol 8 (3) ◽  
pp. 297-300
Keyword(s):  
Concrete Beam ◽  
Coarse Aggregate ◽  
Lightweight Concrete ◽  
Reinforced Concrete Beam ◽  
Unit Weight ◽  
Light Weight ◽  
Pumice Stone ◽  
Light Weight Concrete ◽  
Foamed Concrete ◽  
Light Weight Aggregate

The density of concrete less than that of nominal concrete achieved by any means is referred as Light weight concrete. Circulated air through Concrete, Light Weight Aggregate Concrete, Foamed Concrete are different types of Light weight concrete. In this research study, the density of the concrete has been reduced by replacing the coarse aggregate by the pumice stone as light weight coarse aggregate. The major advantage of this study is to reduce the risk of seismic damages of the structure by reducing the self weight of the structure. The decrease in dead load of structure because of the utilization of LWC additionally brings about reduction in the cross segment of other auxiliary individuals such as beam, column and foundation. The pumice stones have huge number of voids and have moderately higher warm protection than the ostensible aggregates. The objective of this research is to obtain light weight concrete having low unit weight and an optimum compressive strength. The Nominal concrete and the light weight concrete is prepared and the tests were led to decide the mechanical properties and compressive quality, its flexural capacity in beams

scholarly journals GGBS based alkali activated fine aggregate in concrete - Properties at fresh and hardened state

2021 ◽  
Vol 13 (1) ◽  
pp. 47-53
Author(s):  
G. Lizia Thankam ◽  
T.R. Neelakantan ◽  
S. Christopher Gnanaraj
Keyword(s):  
Mechanical Properties ◽  
Alkaline Solution ◽  
Elevated Temperatures ◽  
Fresh Concrete ◽  
Hardened Concrete ◽  
Fine Aggregate ◽  
River Sand ◽  
Complete Replacement ◽  
Concrete Properties ◽  
Fine Aggregates

Abstract Scarcity of the construction materials, peculiarly the natural river sand has become a serious threat in the construction industry. Though many researchers of developed and developing countries are trying to find alternative sources for the same, the complete replacement of the fine aggregate in concrete is crucial. Geopolymer sand developed from the Industrial waste (Ground granulated blast furnace slag - GGBS) is an effective alternative for the complete replacement of the natural sand. The GGBS based geopolymer sand (G-GFA) was tested for physical and chemical properties. Upon the successful achievement of the properties in par with the natural river sand, the fresh properties (fresh concrete density & slump) and hardened properties (compressive strength, tensile strength & flexural strength) of the concrete specimens developed with G-GFA were studied. The G-GFA is obtained by both air drying (AD-G-GFA) and oven drying (OD-F-GFA) after the dry mixing of the alkaline solution and GGBS for about 10 min. Thus, developed fine aggregates were studied separately for the fresh and hardened concrete to optimize the feasible one. Superplasticizer of 0.4% is included in the concrete mix to compensate the sightly hydrophilic nature of the fine aggregates produced. The mechanical properties of the concrete with G-GFA are observed to be more than 90% close to that of the concrete developed with natural river sand. Thus, both the fresh and mechanical properties of the G-GFA concrete specimens resulted in findings similar to those of the control specimen developed with natural river sand reflecting the plausibility of G-GFA as a complete replacement choice to the fine aggregate in the concrete industry. The flaky GGBS particles merge well with the alkaline solution at room temperature itself since the former gets dried at elevated temperatures. Thus, more feasible fresh concrete properties and mechanical properties were recorded for the AD-G-GFA than the OD-G-GFA.

scholarly journals Replacement of Conventional Concrete by Light Weight Concrete

2021 ◽  
Vol 9 (11) ◽  
pp. 1760-1766
Author(s):  
Nadeem Ul Haq
Keyword(s):  
Lightweight Concrete ◽  
Construction Material ◽  
Unit Weight ◽  
Light Weight ◽  
Chloride Permeability ◽  
Conventional Concrete ◽  
Lower Weight ◽  
The Moment ◽  
The Relationship ◽  
Light Weight Aggregate

Abstract: Lightweight concrete (LWC) allows for larger spans, fewer piers, and longer bridge designs due to its lower weight and improved durability. Because superstructures with broader shoulders or additional lanes may be improved without requiring extensive work on the substructure, LWC is a particularly desirable construction material at the moment. The goal of this research was to determine the density (unit weight), splitting tensile strength, and elastic modulus of LWC mixtures under various curing circumstances in order to gain a better knowledge of LWC qualities that are critical for long-lasting and costeffective buildings. The researchers also looked at the relationship between the results of the fast chloride permeability test and the outcomes of other tests and the Werner probe surface resistance test to see if the latter may be used to forecast the permeability of LWC mixtures because it is faster and more convenient. Keywords: Light weight aggregate, pumice, compressive strength, density,

scholarly journals Mechanical Characteristics of Lightweight Concrete Enhanced by Fly-Ash and Steel Fiber

2019 ◽  
Vol 26 (4) ◽  
pp. 16-25
Author(s):  
Arkan Ahmed ◽  
Bayer Al-Sulayvany ◽  
Muyasser Jomma’h
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Steel Fiber ◽  
Lightweight Concrete ◽  
Mineral Admixtures ◽  
Light Weight ◽  
Is Success ◽  
Aggregate Concrete ◽  
Light Weight Aggregate

This research deals with production of light weight aggregate concrete by using clayey stone aggregate, normal material (cement , sand) and some of mineral admixtures (fly ash and steel fiber ). Many trial mix were doing some of these by weighing ratio and others by volumetric ratio . We get light weight aggregate concrete (LWAC) with 24.92 N/ mm2 compressive strength and we improved mechanical properties by adding same percentage of fly ash and steel fiber (0.5 ,1 ,1.5) % of each other as a percentage weighing ratio of cement content . compressive strength increased with (7.8 , 5.2 , 2.9) % , splitting tensile strength increased with (20 ,16.71, 12)% and flexural strength increased with (24.5 , 17.9 , 8) % when adding (0.5 ,1 ,1.5) % of each steel fiber and fly ash respectively. The practical results of the current study indicates that the using clayey stone to produce (LWAC) is success and we can improved mechanical properties of this (LWAC) was produced in this research by adding fly ash and steel fiber with previously percentage.

scholarly journals Comparison of Mechanical Properties of Lightweight and Normal Weight Concretes Reinforced with Steel Fibers

2018 ◽  
Vol 8 (2) ◽  
pp. 2741-2744
Author(s):  
A. Ali ◽  
Z. Soomro ◽  
S. Iqbal ◽  
N. Bhatti ◽  
A. F. Abro
Keyword(s):  
Reinforced Concrete ◽  
Strength Class ◽  
Lightweight Concrete ◽  
Normal Weight ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Hardened Concrete ◽  
Fiber Reinforced ◽  
Conventional Concrete ◽  
Concrete Properties

Compared to conventional concrete, lightweight concrete is more brittle in nature however, in many situations its application is advantageous due to its lower weight. The associated brittleness issue can be, to some extent, addressed by incorporation of discrete fibers. It is now established that fibers modify some fresh and hardened concrete properties. However, evaluation of those properties for lightweight fiber-reinforced concrete (LWFC) against conventional/normal weight concrete of similar strength class has not been done before. Current study not only discusses the change in these properties for lightweight concrete after the addition of steel fibers, but also presents a comparison of these properties with conventional concrete with and without fibers. Both the lightweight and conventional concrete were reinforced with similar types and quantity of fibers. Hooked end steel fibers were added in the quantities of 0, 20, 40 and 60kg/m3. For similar compressive strength class, results indicate that compared to normal weight fiber-reinforced concrete (NWFC), lightweight fiber-reinforced concrete (LWFC) has better fresh concrete properties, but performs poorly when tested for hardened concrete properties.

scholarly journals Reinforcing Mechanisms of Coir Fibers in Light-Weight Aggregate Concrete

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 699
Author(s):  
Xiaoxiao Zhang ◽  
Leo Pel ◽  
Florent Gauvin ◽  
David Smeulders
Keyword(s):  
Cement Hydration ◽  
Natural Fibers ◽  
Autogenous Shrinkage ◽  
Drying Shrinkage ◽  
Hydration Reaction ◽  
Light Weight ◽  
Limited Information ◽  
Aggregate Concrete ◽  
Coir Fibers ◽  
Light Weight Aggregate

Due to the requirement for developing more sustainable constructions, natural fibers from agricultural wastes, such as coir fibers, have been increasingly used as an alternative in concrete composites. However, the influence of coir fibers on the hydration and shrinkage of cement-based materials is not clear. In addition, limited information about the reinforcing mechanisms of coir fibers in concrete can be found. The goal of this research is to investigate the effects of coir fibers on the hydration reaction, microstructure, shrinkages, and mechanical properties of cement-based light-weight aggregate concrete (LWAC). Treatments on coir fibers, namely Ca(OH)2 and nano-silica impregnation, are applied to further improve LWAC. Results show that leachates from fibers acting as a delayed accelerator promote cement hydration, and entrained water by fibers facilitates cement hydration during the whole process. The drying shrinkage of LWAC is increased by adding fibers, while the autogenous shrinkage decreases. The strength and toughness of LWAC are enhanced with fibers. Finally, three reinforcement mechanisms of coir fibers in cement composites are discussed.

Quality assessment of light weight aggregate

1994 ◽  
Vol 24 (8) ◽  
pp. 1423-1427 ◽  
Author(s):  
A. Ulrik Nilsen ◽  
Paulo J.M. Monteiro ◽  
Odd E. Gjørv
Keyword(s):  
Quality Assessment ◽  
Light Weight ◽  
Light Weight Aggregate
Sign in / Sign up

Export Citation Format

Share Document