scholarly journals Prototipe Sistem Notifikasi Banjir Menggunakan Arduino Uno Dan Gsm Modul Untuk Warga Universitas Pembangunan Jaya Kampus Bintaro

2019 ◽  
Vol 5 (2) ◽  
pp. 97
Author(s):  
Renintha Susilo ◽  
Muhammad Gibran ◽  
Fathan Akbar ◽  
Heny Ispur Pratiwi
Keyword(s):  

Tingkat genangan hasil curah air hujan di area akses masuk dan keluar kampus Universitas Pembangunan Jaya (UPJ) dari atau menuju lingkar jalan raya Bintaro Xchange Mall (tepatnya di Jalan Bakti Karya) bisa mencapai lebih dari 35 cm, angka ketinggian tersebut sudah merendam separuh diameter ban motor ukuran normal, sehingga akan mengganggu kelancaran aktivitas akademik UPJ. Sebuah purwarupa sudah dirancang bangun berbasis mikrokontroler Arduino Uno, GSM Modul untuk membantu memberi notifikasi para warga UPJ tentang kondisi tingkat genangan volume airpada jalan akses tersebut melalui sistem SMS terdaftar, sehingga warga UPJ tidak terjebak di area tersebut.Kata Kunci : Arduino Uno, GSM Modul, Water Level Senso

2015 ◽  
Vol 14 (2) ◽  
pp. 75
Author(s):  
I G.M Sugiri Arnawa ◽  
I . G. A. Raka AGung

The prototype of this dam water level monitoring function to provide information about the dam water level through social media twitter and speakers. Information on twitter social media can be found by following the twitter account of this tool . The prototype consists of a microcontroller Arduino Uno , HC - SR04 sensor , LCD , WTV020SD and the Ethernet Shield . Sensor HC - SR04 , read the value of the dam water level based on emission and reflection of ultrasonic waves . Arduino Uno microcontroller will process and display the sensor input from HC - SR04 form of dam water level on the LCD and sent via ethernet shield to social media twitter . WTV020SD serves to ring the speaker on the water level 10 cm , 20 cm , 30 cm and 40 cm . The sound emitted is the normal condition of the dam , flood alert , flood alert and flood . Water level measurement results on LCD , manual measurement and display on twitter social media have gotten the same results .


2021 ◽  
Vol 2 (4) ◽  
Author(s):  
Refni Wahyuni ◽  
Jeri Trio Sentana ◽  
Muhardi Muhardi ◽  
Yuda Irawan

2015 ◽  
Vol 4 (1) ◽  
pp. 22
Author(s):  
Heki Apriyanto
Keyword(s):  

Penelitian ini bertujuan untuk membangun sistem pintu air otomatis membuka ataupun menutup pintu berdasarkan ketinggian air pada bendungan yang sebelumnya masih bersifat konvensional atau masih menggunakan tenaga manusia. Pintu air yang bersifat konvensional dinilai kurang efektif, mengingat curah hujan yang cukup tinggi disertai sulitnya memperkirakan ketinggian air yang selalu berubah-ubah, selain faktor tersebut ketinggian air pada suatu bendungan dipengaruhi juga oleh banjir kiriman didaerah lain. Metode penelitian yang digunakan dengan menggunakan pengumpulan data dan pengembangan perangkat yang terdiri dari perencanaan, analisis, perancangan dan implementasi, dimana dalam analisis menggunakan analisis SWOT untuk menilai layak atau tidaknya rancangan ini diterapkan. Hasil yang diharapkan adalah terwujudnya pintu air otomatis untuk meringankan manusia dalam menjalankan tugas serta membuat sistem yang berjalan dengan lebih efisien. Rancang bangun pintu air otomatis ini menggunakan mikrokontroler arduino uno dan nano sebagai alat pemroses, serta dilengkapi dengan sensor ultrasonik, water level float switch sensor, LCD display, motor servo. Water level float switch sensor yang berfungsi untuk memutar motor servo untuk mengangkat atau menurunkan pintu air sesuai batas ketinggian air. Hasil yang diharapkan adalah terciptanya sistem pintu air otomatis pada suatu bendungan dan dapat mengurangi kelalaian manusia dalam bertugas mengingat sulitnya memperkirakan ketinggian air yang selalu berubah-ubah dalam waktu tertentu.


Kilat ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 77-88
Author(s):  
NOVI KURNIASIH ◽  
DEWI PURNAMA SARI ◽  
DENA ANDIKA RIZKA FIRDAUS

ABSTRACT The slow handling of the flooding problem for people who live on riverbanks and densely populated areas in urban areas due to the lack of preliminary information obtained by the local community, causing huge losses both morally, materially and even causing fatalities. Based on these problems, a prototype monitoring system for flooding early detection was made with the aim that it can be used as a means of information whose data can be accessed through notifications in the form of short message services (SMS) in real time. In making this research, data collection was carried out in the form of water level data that had occurred at the location of the flood and then made the system design and implementation of that system by conducting trials in the field. This early flood detection system works by monitoring the water level using a level control system. This water level monitoring uses an ultrasonic sensor that is controlled using an arduino uno microcontroller. Data information about the water level is forwarded to the GSM module in the form of a notification message of SMS to the public. For the working of this prototype device in the design, the author uses an electrical power supply from renewable energy in the form of On Grid PLTS system. The results obtained from this research are for normal status the water level is at 5-50 cm, for alert status is 55-85 cm and for danger status is 90-100 cm. Keywords:   Water Level, Ultrasonic Sensor, Arduino Uno Microcontroller, GSM Module, On Grid PLTS System   ABSTRAK Lambatnya penanganan masalah banjir bagi masyarakat yang tinggal di daerah bantaran pinggiran sungai maupun kawasan padat penduduk yang berada di perkotaan dikarenakan kurangnya informasi awal yang diperoleh oleh masyarakat setempat sehingga menyebabkan kerugian yang sangat besar baik secara moril, materil bahkan sampai menimbulkan korban jiwa. Berdasarkan permasalahan tersebut maka dibuat suatu prototype sistem monitoring pendeteksi dini banjir dengan tujuan dapat digunakan sebagai sarana informasi yang datanya dapat diakses melalui notifikasi berupa short message service (SMS) secara real time. Dalam membuat penelitian ini dilakukan pengumpulan data berupa data level ketinggian air yang pernah terjadi di lokasi banjir kemudian membuat perancangan sistem serta pengimplementasian dari sistem yang dibuat dengan melakukan uji coba di lapangan. Sistem pendeteksi dini banjir ini bekerja dengan cara memantau level ketinggian air menggunakan sistem level control. Pemantauan level ketinggian air ini menggunakan sensor ultrasonik yang dikontrol menggunakan mikrokontroller arduino uno. Informasi berupa data-data mengenai level ketinggian air ini diteruskan ke modul GSM berupa pesan notifikasi dalam bentuk SMS kepada masyarakat. Untuk bekerjanya perangkat prototype ini dalam rancangannya penulis menggunakan suplai daya listrik dari renewable energy berupa sistem PLTS On Grid. Hasil yang diperoleh dari penelitian ini yaitu bahwa untuk status normal level ketinggian air berada pada angka 5-50 cm, untuk status siaga berada pada angka  55-85 cm dan untuk status bahaya berada pada angka 90-100 cm. Kata kunci:   Level Ketinggian Air, Sensor Ultrasonik, Mikrokontroler Arduino Uno, Modul GSM, Sistem PLTS On Grid


2021 ◽  
Vol 6 (3) ◽  
Author(s):  
Muhaimin Muhaimin ◽  
Bengawan Alfaresi ◽  
Feby Ardianto

The arrangement of the floodgates for rice irrigation canals is currently still using the manual method. This is very burdensome for farmers because it requires time and energy. Therefore, we need a sluice in the irrigation canal that can be done automatically. The purpose of this research is to design a miniature sluice system that can automate the sluice gate in opening and closing the sluice gate based on the water level limit of the channel. The method used in this study is the use of Arduino Uno as data storage, a servo motor that functions as a floodgate controller, a water level sensor to open the floodgate and an ultrasonic sensor that functions to determine the water level. The results of the tool testing in the research of the miniature automatic sluice gate that has been designed, namely the automatic sluice gate will open when the water sensor at the top is exposed to water. The ultrasonic sensor will measure the distance between the sensor and the water surface to make a decision to close the floodgate. If the sensor distance with the water surface is still 14 m, then the floodgate will open 1800, if the sensor distance with the water surface is 4 cm and 14 cm, then the floodgate will open 900 and if the distance between the sensor and the water surface is 4 cm, then the floodgate will be closed.


2020 ◽  
Vol 26 (1) ◽  
pp. 68
Author(s):  
Ratna Herawati ◽  
Wisnu Sanjaya ◽  
Syah Ronny Wijaya
Keyword(s):  

Ruang terbuka hijau yang semakin berkurang, eksploitasi hutan secara besar-besaran, sampah-sampah semakin menumpuk ditambah dengan perubahan cuaca yang ekstrim dapat memicu terjadinya bencana alam. Salah satunya adalah banjir yang dapat menghambat aktivitas, menimbulkan berbagai penyakit serta kerugian secara materi. Oleh karena itu untuk mengurangi dampak kerugian yang ditimbulkan oleh banjir adalah adanya sistem atau alat pendeteksi banjir dengan alarm. Prototype alarm pendeteksi banjir dengan sensor water level Funduino berbasis Arduin Uno ini dibuat untuk membantu masyarakat dalam meminimalisir kerugian yang ditimbulkan oleh banjir dan dapat dipantau melalui LCD. Pada penelitian ini digunakan sensor water level Funduino untuk mengetahui adanya air. Data dari sensor berupa sinyal digital yang akan diproses oleh Mikrokontroler Arduino Uno kemudian ditampilkan pada LCD sebagai display dan akan ditandai dengan bunyi alarm dari buzzer. Berdasarkan pengujian yang telah dilakukan baik pada mekanik maupun pada elektronika yang telah dibuat serta melihat tujuan dari penelitian, maka dapat disimpulkan bahwa alat telah diuji dan dapat digunakan untuk membantu masyarakat maupun penjaga pintu air.


2021 ◽  
Vol 5 (2) ◽  
pp. 352-361
Author(s):  
Budi Yannur ◽  
◽  
Didit Suprihanto ◽  
Happy Nugroho ◽  
Aji Ery Burhandenny ◽  
...  

PDAM Loa Kulu Branch still uses sticks or poles as an indicator of the water level in the reservoir. Reservoir is a place to store clean water production from PDAM, the weakness of using sticks or poles is when the operator does not monitor continuously causing air loss when production becomes large. The goal of the study was to design a water-level prototype to control excess water in the reservoir. The method used is a prototype with the stage of gathering information through interviewing PDAM staff, creating and repairing prototypes and testing prototypes. The test used hardware consisting of Arduino uno r3, ultrasonic sensor hc-sr04, flowmeter sensor yf-s201, 16 x 2 lcd, relay module, buzzer, solenoid valve 12 V_dc, pump 12 V_dc and display measurement results in the visual studio application 2019. Our findings are that the length of reservoir charging with an average input discharge of 3.6 liters / minute is 2.93 minutes. As for the length of emptying the reservoir with an average output discharge of 1.06 liters / minute is 12.10 minutes. The conclusion of this study is that the system can monitor the water level inside the reservoir automatically and know the time needed for the feeling and emptying process of the reservoir.


2021 ◽  
Vol 5 (2) ◽  
pp. 352-361
Author(s):  
Budi Yannur ◽  
◽  
Didit Suprihanto ◽  
Happy Nugroho ◽  
Aji Ery Burhandenny ◽  
...  

PDAM Loa Kulu Branch still uses sticks or poles as an indicator of the water level in the reservoir. Reservoir is a place to store clean water production from PDAM, the weakness of using sticks or poles is when the operator does not monitor continuously causing air loss when production becomes large. The goal of the study was to design a water-level prototype to control excess water in the reservoir. The method used is a prototype with the stage of gathering information through interviewing PDAM staff, creating and repairing prototypes and testing prototypes. The test used hardware consisting of Arduino uno r3, ultrasonic sensor hc-sr04, flowmeter sensor yf-s201, 16 x 2 lcd, relay module, buzzer, solenoid valve 12 V_dc, pump 12 V_dc and display measurement results in the visual studio application 2019. Our findings are that the length of reservoir charging with an average input discharge of 3.6 liters / minute is 2.93 minutes. As for the length of emptying the reservoir with an average output discharge of 1.06 liters / minute is 12.10 minutes. The conclusion of this study is that the system can monitor the water level inside the reservoir automatically and know the time needed for the feeling and emptying process of the reservoir.


Author(s):  
Shweta Ashok Vispute

Abstract: This project gives an outline for the development of an information system based on the existing systems with the utilization of some sensors and IOT. The cradle of this project is based on methodology of IOT. Water level in a dam needs to be maintained effectively to avoid complications. The quantity of water released is hardly ever correct resulting in wastage of water and it is impossible for a man to precisely control the gates without knowledge of exact water level and water inflow rate. We have developed a mechatronics based system. We have designed a system in which real time things are interconnected to web. Water level contactless Ultrasonic sensor is placed in tub connected through Arduino UNO to serve the same purpose automatically and forward the status to it. This system detects the level of water and estimate the water inflow rate in a tub and thereby control the Solenoid valve using IOT in a real-time basis. The water level is analysed using this sensor and updated in the web server using IOT module connected to the Arduino UNO. Arduino unit checks that input and upload the status of water level on web. Keywords: IOT (Internet of Things), Mechatronics, Ultrasonic sensor, Arduino UNO, Solenoid valve.


Sign in / Sign up

Export Citation Format

Share Document