scholarly journals Rancang Bangun Prototype Sistem Monitoring Pendeteksi Dini Banjir Berbasis Short Message Service Menggunakan PLTS On Grid

Kilat ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 77-88
Author(s):  
NOVI KURNIASIH ◽  
DEWI PURNAMA SARI ◽  
DENA ANDIKA RIZKA FIRDAUS

ABSTRACT The slow handling of the flooding problem for people who live on riverbanks and densely populated areas in urban areas due to the lack of preliminary information obtained by the local community, causing huge losses both morally, materially and even causing fatalities. Based on these problems, a prototype monitoring system for flooding early detection was made with the aim that it can be used as a means of information whose data can be accessed through notifications in the form of short message services (SMS) in real time. In making this research, data collection was carried out in the form of water level data that had occurred at the location of the flood and then made the system design and implementation of that system by conducting trials in the field. This early flood detection system works by monitoring the water level using a level control system. This water level monitoring uses an ultrasonic sensor that is controlled using an arduino uno microcontroller. Data information about the water level is forwarded to the GSM module in the form of a notification message of SMS to the public. For the working of this prototype device in the design, the author uses an electrical power supply from renewable energy in the form of On Grid PLTS system. The results obtained from this research are for normal status the water level is at 5-50 cm, for alert status is 55-85 cm and for danger status is 90-100 cm. Keywords:   Water Level, Ultrasonic Sensor, Arduino Uno Microcontroller, GSM Module, On Grid PLTS System   ABSTRAK Lambatnya penanganan masalah banjir bagi masyarakat yang tinggal di daerah bantaran pinggiran sungai maupun kawasan padat penduduk yang berada di perkotaan dikarenakan kurangnya informasi awal yang diperoleh oleh masyarakat setempat sehingga menyebabkan kerugian yang sangat besar baik secara moril, materil bahkan sampai menimbulkan korban jiwa. Berdasarkan permasalahan tersebut maka dibuat suatu prototype sistem monitoring pendeteksi dini banjir dengan tujuan dapat digunakan sebagai sarana informasi yang datanya dapat diakses melalui notifikasi berupa short message service (SMS) secara real time. Dalam membuat penelitian ini dilakukan pengumpulan data berupa data level ketinggian air yang pernah terjadi di lokasi banjir kemudian membuat perancangan sistem serta pengimplementasian dari sistem yang dibuat dengan melakukan uji coba di lapangan. Sistem pendeteksi dini banjir ini bekerja dengan cara memantau level ketinggian air menggunakan sistem level control. Pemantauan level ketinggian air ini menggunakan sensor ultrasonik yang dikontrol menggunakan mikrokontroller arduino uno. Informasi berupa data-data mengenai level ketinggian air ini diteruskan ke modul GSM berupa pesan notifikasi dalam bentuk SMS kepada masyarakat. Untuk bekerjanya perangkat prototype ini dalam rancangannya penulis menggunakan suplai daya listrik dari renewable energy berupa sistem PLTS On Grid. Hasil yang diperoleh dari penelitian ini yaitu bahwa untuk status normal level ketinggian air berada pada angka 5-50 cm, untuk status siaga berada pada angka  55-85 cm dan untuk status bahaya berada pada angka 90-100 cm. Kata kunci:   Level Ketinggian Air, Sensor Ultrasonik, Mikrokontroler Arduino Uno, Modul GSM, Sistem PLTS On Grid

2020 ◽  
Vol 17 (2) ◽  
pp. 803-813
Author(s):  
Emy Haryatmi ◽  
Aris Tito Sugihharto ◽  
Maulana Mujahidin

Autonomous robotic monitoring of human and animal used to secure the house or the flat. This robot can move freely from one side to another side of the house or the flat. Accordingly, this robot is sending the vision to android smartphone in real time. Therefore, the owner of the house or the flat can see inside the house while they were not around. The objective of this research is to develop autonomous robotic to be able to monitor the area from the existing of human and animal and send the vision to android smartphone in real time. This research used four leg robotic as an autonomous robotic monitoring. Four leg robotic is equipped with camera which connected to router based on wireless connection, PIR and ultrasonic sensor and GSM module to send short message service (SMS) notification if PIR sensor detect some movement. The experiment used cat as an animal object. Experiment showed that this robot can follow the object, either a human or an animal, within range of 10–45 cm from robot in 12 seconds and send the vision to android smartphone in real-time. The SMS is received in 5 seconds after camera capture the object. This robotic cannot determine who is the object on the camera because it is not equipped with object detection system.


2020 ◽  
Vol 2 (1) ◽  
pp. 8-13
Author(s):  
Abd Wahid A. Antu ◽  
Syahrir Abdussamad ◽  
Iskandar Z. Nasibu

Abstrak— Umumnya running text digunakan untuk menampilkan informasi yang biasanya digunakan pada minimarket, hotel, gedung pernikahan dan lampu lalu lintas, biasa pengontrolannya tersebut  menggunakan komunikasi Infrared, WIFI, SMS (Short Message Service). Akan tetapi penggunaanya masih kurang efisien dibandingkan dengan bluetooth yang mempunyai fitur-fitur keamanan enkripsi data, autentikasi user , fast frekuensi-hopping (1600 hops/sec), output power control yang menyediakan fungsi-fungsi keamanan dari tingkat layer fisik/ radio yaitu gangguan dari penyadapan sampai dengan tingkat keamanan layer yang lebih tinggi seperti password dan PIN dan konsumsi daya tidak terlalu tinggi. Tujuan dari penelitian ini yaitu, merancang aplikasi android update data running text pada panel LED Matrix p10 melalui perangkat smartphone dengan aplikasi via bluetooth dan perancangan alat display running text Panel LED p10 dengan metode experimen. Adapun tahapan pembuatan alat menggunakan bluetooth HC-05, sensor suhu (DHT11) untuk ditampilkan pada papan informasi display, RTC (real time clock) 3231 sebagai pembaca waktu untuk menampilkan jam, hari , tanggal, dan panel LED p10 16x60 untuk menampilkan running text. Kemudian untuk pembuatan aplikasi android menggunakan perangkat lunak App Inventor, dimana aplikasi pengontrolan running text diberi nama running text controller (RTC).Rancang bangun alat dan aplikasi dalam penelitian ini membuahkan hasil aplikasi android dengan pengontrolan bluetooth, dinilai dapat meningkatkan kecepatan dan efisiensi saat penggantian text pada papan display LED matrix 16x160.  Rata-rata kecepatan penggantian text bisa dicapai 1,0 detik secara real time dengan jarak  15 meter, dan mampu menampung maksimal 255 karakter. berdasarkan hasil penelitian sistim yang dibangun dapat berfungsi dengan baik.Kata kunci: Arduino Uno, Bluetooth, LED matrix 16x160, Running text, aplikasi android, papan informasi. 


Author(s):  
I Komang Krisna Ade Marta ◽  
I Nyoman Buda Hartawan ◽  
I Kadek Susila Satwika

AbstrakKeamanan server merupakan hal penting yang perlu diberikan perhatian lebih saat melakukan konfigurasi server. Pada umumnya serangan yang terjadi pada server diketahui setelah terjadinya kegagalan pada server dalam memberikan layanan. Pada penelitian ini, dibangun sebuah sistem keamanan server yang dapat melakukan monitoring pada sebuah server ketika terdeteksi adanya aktivitas yang tidak wajar. Pemberitahuan akan dikirimkan melalui SMS (Short Message Service) ke handphone Administrator jaringan. Sistem yang dibangun melakukan pendeteksian intrusi pada server secara realtime menggunakan SNORT. Ketika terjadi akses yang tidak wajar pada server, maka SNORT akan mendeteksi dan mengirimkan informasi terjadinya aktivitas yang tidak wajar ke Administrator jaringan. Sistem ini diujikan dengan lima jenis serangan yakni PING Attack, DoS/DDoS Attack, Port Scanning, Telnet Access dan FTP Access. Parameter yang diamati pada penelitian ini adalah beban aktivitas yang terjadi pada sumber daya server meliputi CPU, Memory (RAM) dan beban jaringan. Hasil penelitian menunjukkan bahwa saat terjadi upaya serangan terhadap server, SNORT dapat menghasilkan alert yang akan disimpan pada log sekaligus dikirimkan ke handphone Administrator melalui SMS. AbstractServer security is an important thing that needs to be given more attention when configuring a server. In general, attacks that occur on the server are known after a failure on the server in providing services. In this study, a server security system was built that could monitor a server when an unusual activity was detected. Notifications will be sent via SMS (Short Message Service) to the network Administrator's smartphone. The system is built to detect intrusions on the server in real time using SNORT. When improper access occurs on the server, SNORT will detect and send information about the occurrence of unusual activity to the network Administrator. This system is tested with five types of attacks namely PING Attack, DoS / DDoS Attack, Port Scanning, Telnet Access and FTP Access. The parameters observed in this study are the activity load that occurs on server resources including CPU, Memory (RAM) and network load. The results showed that when an attempt was made to attack the server, SNORT could produce alerts that would be stored in a log as well as sent to the Administrator's smartphone via SMS.


2011 ◽  
Vol 121-126 ◽  
pp. 3750-3754 ◽  
Author(s):  
Chung Chiang Hu ◽  
Shing Han Li ◽  
Tien Wei Tsai

The equipments in computer rooms are complicated in nature. Many factors may influence their normal operations, for example: voltage, temperature, humidity, and the normalcy of systems. It would be prudent to have a monitoring system to prevent from unpredictable problems. Most monitoring systems in the market can only issue alarms in abnormal situations and then analyze the aftermath. They are also expansive and lack the ability for distant instant control. To tackle this problem, after our successful and practical experiments, we utilize GSM text messaging ability (i.e. SMS, short message service) and make distant monitoring possible. The monitoring system is established with a reasonable price that is well below current market. With this system, the manager/administrator can monitor the real-time status of equipments in computer rooms, send control commands through SMS and then get them executed to solve the problems instantly and effectively.


2018 ◽  
Vol 13 (02) ◽  
pp. 1976-1983
Author(s):  
Suradi Suradi ◽  
Ahmad Hanafie ◽  
Satriani Satriani

Penelitian ini bertujuan untuk merancang sebuah alat monitoring temperatur dan kelembaban suhu baik pada dalam ruangan maupun luar ruangan yang berbasis Short Message Service menggunakan Arduino Nano dengan tujuan untuk memudahkan mengetahui informasi temperatur dan kelembaban ruangan secara Real Time. Sistem ini terdiri dari beberapa komponen seperti Arduino Nano, Sensor DHT21, GSM Sim800L, dan masih banyak lagi yang dibangun menggunakan bahasa pemrograman bahasa C. Adapun metode penelitian yang digunakan dalam eksperimen ini adalah pengujian langsung pada alat. Hasil yang diperoleh adalah sebuah alat monitoring temperatur ruangan berbasis Short Message Service yang menggunakan Arduino Nano yang dilengkapi dengan tampilan informasi temperatur dan kelembaban ruangan atau luar ruangan melalui Handphone. Berdasarkan hasil pembuatan, pengoperasian, dan pengujian alat, diketahui bahwa cara kerja alat monitoring temperatur dan kelembaban ruangan berbasis Short Message Service menggunakan Arduino Nano bekerja sesuai dengan harapan dan teori yang mendukung. Hasil penelitian ini bertujuan untuk mengetahui secara Real Time temperatur dan kelembaban dalam ruangan maupun luar ruangan dengan menggunakan sensor DHT21 dan informasi suhu ditampilkan pada Handphone yang nomor telah ditentukan pada Coding jaringan yang digunakan untuk mengirim informasi yaitu jaringan GSM Sim800L.


Author(s):  
Rivaldo Sirai ◽  
Kamil Erwansyah ◽  
Hendra Jaya ◽  
Hendryan Winata

Kebocoran pada tabung atau instalasi gas merupakan salah satu risiko penggunaan Liquefied Petroleum Gas , apabila langkah penanggulangannya terlambat dan tidak tepat bisa mengancam keselamatan dan kesehatan. Kebocoran LPG tidak hanya rentan menyulut kebakaran atau ledakan bila terkena api, juga sangat berbahaya bagi kesehatan tubuh ketika terhirup, LPG memiliki karakteristik yang mudah terbakar serta memiliki berat jenis yang lebih besar dari udara sehingga sulit untuk mendeteksi gas tersebut apabila terjadi kebocoran pada tabung, yang disebabkan oleh gas ini, dikarenakan terakumulasi pada bagian bawah ruangan serta mudah terbakar , hal ini akan memiliki dampak yang lebih berbahaya apabila rumah sering ditinggal dalam kondisi regulator masih terpasang pada tabung.Oleh karena itu dibuatlah system monitoring kebocoran gas menggunakan fitur tambahan yaitu Short Message Service , yang dapat mengirim pesan notifikasi ketika kebocoran pada LPG telah melewati batas normal yang dapat memicu terjadinya kebakaran yang dapat menelan korban.Dengan demikian system monitoring kebocoran gas LPG ini dapat menginformasikan apabilah terdeteksi kebocoran gas LPG yang akan diberikan kepada pengguna melalui SMS (Short Message Service)


2020 ◽  
Vol 22 (1) ◽  
pp. 12
Author(s):  
I Putu Wahyu Pranata Kusuma Jaya ◽  
I Gusti Agung Widagda

Telah berhasil dibuat sebuah alat yang dapat memantau suhu dan kelembaban udara melalui sebuah ponsel berbasis Short Message Service (SMS) dengan nama AWE.2020. Alat ini terdiri dari sensor suhu dan kelembaban DHT22, modul GSM SIM800L, dan mikrokontroler Arduino Uno R3. Hasil pembacaan suhu dan kelembaban dari sensor DHT22 diolah oleh mikrokontroler Arduino Uno R3 dan hasilnya dikirimkan berupa SMS lewat modul GSM SIM800L. Untuk mengukur tingkat keakuratan dari alat rancangan (AWE.2020) telah dilakukan kalibrasi dengan alat standar AWS yang ada di Stasiun Klimatologi Jembrana, Bali. Beberapa parameter dipakai untuk mengukur tingkat keakuratan alat ukur ini yaitu analisis regresi dan uji-t statistik. Hasil pengamatan menunjukkan bahwa kinerja dari AWE.2020 ini sangat bergantung pada kualitas sinyal provider. Saat kondisi sinyal provider bagus, hasil uji-t dan analisis regresi alat ini menunjukan tingkat keakuratan yang tinggi. Demikian sebaliknya. Dari hasil pengamatan, serta uji statistik diperoleh bahwa alat tersebut akurat dan presisi untuk digunakan namun bergantung pada sinyal provider yang digunakan.


2020 ◽  
Vol 3 (1) ◽  
pp. 90-100
Author(s):  
Yuda Irawan ◽  
Areta Sonya Rahajeng ◽  
Muhardi ◽  
Refni Wahyuni

To facilitate control of lights in a home with a remote control so they invented a system of utilization of GSM Module Based Arduino Uno For Home Lighting Remote Control. The whole tool is divided into several parts, which consist of a Mobile, GSM SIM 800L module, arduino uno microcontroller, relay module, and lights. This tool works when Mobile sends an SMS (Short Message Service) containing commands to GSM SIM 800L, from GSM SIM 800L then to the microcontroller to process commands, from the microcontroller then to the relay module that works as a substitute for a switch that functions to turn on or turn off the lights which are desired.


2020 ◽  
Vol 12 (24) ◽  
pp. 4167
Author(s):  
Kaifei He ◽  
Duojie Weng ◽  
Shengyue Ji ◽  
Zhenjie Wang ◽  
Wu Chen ◽  
...  

Real-time precise point positioning (RTPPP) is a popular positioning method that uses a real-time service (RTS) product to mitigate various Global Navigation Satellite Systems (GNSS) errors. However, communication links are not available in the ocean. The use of a communication satellite for data transmission is so expensive that normal users could not afford it. The BeiDou short-message service provides an efficient option for data transmission at sea, with an annual fee of approximately 160 USD. To perform RTPPP using BeiDou short messages, the following two challenges should be appropriately addressed: the maximum size of each BeiDou message is 78 bytes, and the communication frequency is limited to once a minute. We simplify the content of RTS data to minimize the required bandwidth. Moreover, the orbit and clock corrections are predicted based on minute-interval RTS orbital and clock corrections. An experiment was conducted to test the performance of the proposed method. The numerical results show that the three-dimensional positioning precision can reach approximately 0.4 m with combined GPS + GLONASS and approximately 0.2 m with combined GPS + GLONASS + Galileo + BeiDou.


Sign in / Sign up

Export Citation Format

Share Document