Process simulation modeling of phytophagans' influence on the yield of seed fruit crops

2019 ◽  
pp. 138-143
Author(s):  
V. A. Shishkin ◽  
E. P. Rybalkin ◽  
E. B. Balykina
Keyword(s):  
Process Simulation ◽  
Simulation Modeling ◽  
Software Package ◽  
Development Process ◽  
Simulation Models ◽  
Vegetation Period ◽  
Fruit Crops ◽  
Generational Change ◽  
Apple Trees ◽  
Nonlinear Characteristics

Simulation modeling of phytophagans’ influence on the yield of seed fruit crops, in particular apple trees, was carried out. By means of simulation models the importance of phytophagans’ influence at different stages of the vegetation period and the period of fruit ripening was revealed. The software package Matlab was used to build simulation models. As a result, simulation models with nonlinear characteristics were obtained, which maximally reflected the studied processes. The developed models imitate the process of phytophagans’ development. Generation change of pests and all stages of their development are simulated. Their respective numbers are recorded at each stage for all generations. The development process at each stage is modeled by separate subsystems of the simulation model. To simulate the development of one generation of pests, these subsystems are connected by external links. In addition, part of the relationships provides a simulation of generational change. There are a number of input parameters that allow to configure the simulation of the process of changing generations, taking into account the peculiarities of the development of various phytophagans.

scholarly journals Особливості біології та шкідливості вічкової галиці (Thomasiniana Oculiperda Rubs.) і захист від неї саджанців яблуні в розсаднику Лісостепу України

2015 ◽  
pp. 32-35
Author(s):  
Ю. П. Яновський ◽  
С. В. Cуханов ◽  
В. П. Гричанюк
Keyword(s):  
Technical Efficiency ◽  
Effective Temperature ◽  
Vegetation Period ◽  
Steppe Zone ◽  
Lower Threshold ◽  
Forest Steppe ◽  
Apple Trees ◽  
Leaf Curling ◽  
Three Generations ◽  
Pest Infestation

Наведено результати досліджень з уточнення біо-логічних особливостей вічкової галиці (Thomasinianaoculiperda Rubs.) у розсаднику яблуні в зоні ЛісостепуУкраїни. Встановлено, що зимують личинки в грунтіна глибині 4–5 см, відродження яких спостерігаєтьсяв кінці першої–на початку другої декади квітня, азалялькування – в кінці другої – на початку третьоїдекади квітня. Літ дорослих самок відбувається удругій половині травня – першій половині червня. Че-рез 8–10 днів з’являються личинки, які пошкоджують29,8–37,7 % защеплених бруньок («вічок»). За веґета-ційний період шкідник розвивається у трьох поколін-нях. Для розвитку одного покоління шкідника необ-хідна сума ефективних температур від 274,3°С до290,6°С (нижній поріг складає 15,6°С). Вивчено тех-нічну ефективність застосування препаратів у захис-ті цієї культури від шкідника. Встановлено, що длязниження її шкідливості необхідно застосовуватиінсектициди «Моспілан», РП (0,2 кг/га), «Каліпсо» 480SC, КС (0,25 л/га), «Сумітіон», КЕ (2,5 л/га), «Гло-віс», СК ( 1,5 л/га), «Дурсбан» 480, к.е. (2,0 л/га), «Зо-лон» 35, к.е. (3,0 л/га), «Ланнат» 20, РК (1,2 л/га) та«Пірінекс» 480, КЕ (2,0 л/га). The results of studies were showed to clarify the biological peculiarities, harmfulness of apple leaf curling midge of apple trees’ sapling and efficacy of insecticides in control of pest infestation in Forest-Steppe zone of Ukraine. It is established, that larva overwinters in the soil on the depth of 4-5 cm, their revival is observed at the end of 1st till the end of second decade of April and pupation – in late second – early third decade of April. Adult female’s  flights take place in the second decade of May – first decade of June. In 8–10 days larva appears, which damage 29,8–37,7 % of grafting buds.  During the vegetation period the pest is developing by three generations. For one generation of pest’s development need the sum of effective temperature from 274,3°С to 290,6°С (the lower threshold of the temperature is 15,6°С).         The technical efficiency of products application in protection of this crop against this pest is studied. It is established that for decreasing of its harmfulness it needed to apply the following insecticides Mospilan, RP (0,2 kg/hа), Calipso 480 SC, (0,25 l/hа), Sumition, КЕ (2,5 l/hа), Hlovis  СК ( 1,5 l/hа), Dursban 480, SC (2,0 l/hа), Zolon 35, KE (3,0 l/hа), Lannate 20,RК  (1,2 l/hа) and Pirineks 480, КЕ (2,0 l/hа).

scholarly journals Examination of soils and crops after the inundations of 1st February, 1953. III. Sensitivity to salt of inundated fruit crops.

1955 ◽  
Vol 3 (1) ◽  
pp. 15-34
Author(s):  
W.G. Beeftink
Keyword(s):  
Soil Moisture ◽  
Growth Condition ◽  
Salt Water ◽  
Salt Content ◽  
Flood Damage ◽  
Tree Age ◽  
Limiting Factor ◽  
Fruit Crops ◽  
Apple Trees ◽  
Tree Resistance

Characteristic symptoms of salt water flood damage are described for apples, pears, plums, cherries, currants, gooseberry, walnuts, grapes and mulberries. In general the crops showed symptoms of drying out, indicating their inability to absorb enough water. A table of the approximate sensitivity of the fruit crops, and also of apple and pear varieties was compiled; there was a wider range of sensitivity in apples than in pears. The sensitivity of the chief Malling rootstocks did not appear to run parallel to their vigour. The salt content of the soil moisture was the limiting factor for apple and pear recovery; 7-8 g. per litre for apples, and 11-12 g. for pears were the limits beyond which trees could not be saved. Flooding had no influence on the growth condition of apples and pears until after it had lasted 8 or 9 weeks. Tree age had no clear effect on sensitivity, though apple trees of 25 years and over had less resistance. Deep cultivation before flooding, soil exhaustion, and general neglect had detrimental effects on tree resistance. (Abstract retrieved from CAB Abstracts by CABI’s permission)

Dynamical Simulation Models of the Open Source Development Process

2008 ◽  
pp. 698-721
Author(s):  
I. P. Antoniades ◽  
I. Samoladas ◽  
I. Stamelos ◽  
L. Angelis
Keyword(s):  
Open Source ◽  
General Framework ◽  
Development Process ◽  
Simulation Models ◽  
Real Data ◽  
Simulation Methods ◽  
Dynamical Simulation ◽  
Closed Source ◽  
Free Open Source ◽  
Open Source Development

This chapter will discuss attempts to produce formal mathematical models for dynamical simulation of the development process of Free/Open Source Software (F/OSS) projects. First, a brief overview for simulation methods of closed source software development is given. Then, based on empirical facts reported in F/OSS case studies, we describe a general framework for F/OSS dynamical simulation models and discuss its similarities and differences to closed source software simulation. A specific F/OSS simulation model is introduced. The model is applied to the Apache project and to the gtk+ module of the GNOME project, and simulation outputs are compared to real data. The potential of formal F/OSS simulation models to turn into practical tools used by F/OSS coordinators to predict key project factors is demonstrated. Finally, issues for further research and efforts for improvement of this first-attempt model are discussed.

Virtual Development Environment for Fluid Power Mechatronic Systems

2009 ◽  
Author(s):  
Torsten Verkoyen ◽  
Rene´ von Dombrowski ◽  
Hubertus Murrenhoff
Keyword(s):  
Development Process ◽  
Simulation Models ◽  
Fluid Power ◽  
Hardware In The Loop ◽  
Mechatronic System ◽  
Mechatronic Systems ◽  
Development Environment ◽  
German State ◽  
Long Time ◽  
Soft And Hardware

In this paper the results of the German state-funded research project “Fluidtronic”, that deals with a virtual development environment for fluid technical mechatronic systems, is presented. Firstly the conventional development process of a fluid technical mechatronic system is introduced. The conventional development process typically takes a long time because design failures are often only identified during the plant commissioning. Secondly the new virtual development environment, which is worked out in the “Fluidtronic” project is presented. It shows how both the system performance can be optimized and also how the commissioning time can be reduced extensively, if the interactions between mechanical, electrical and fluid power parts are tested at an early point of time in the development process. Optimizations in the development process are realized with the help of new and improved simulation models as well as soft- and hardware in the loop simulations.

Dynamic Modeling on the Hybrid MCFC-Gas Turbine Bottoming Cycle

2003 ◽  
Author(s):  
Huisheng Zhang ◽  
Shilie Weng ◽  
Ming Su
Keyword(s):  
Fuel Cell ◽  
Power Plant ◽  
Gas Turbine ◽  
Simulation Modeling ◽  
Dynamic Models ◽  
Simulation Models ◽  
Fuel Cell Stack ◽  
Hybrid Power ◽  
Hybrid Power Plant ◽  
Micro Turbine

The intention of this paper is to present the dynamic models for the MCFC-gas turbine hybrid cycle. This paper analyzes the performance of various components in the hybrid power plant, such as compressor, turbine, recuperator, generator, fuel cell stack etc. The modular simulation models of these components are presented. Based on the dynamic simulation modeling principle, one bottoming hybrid MCFC-Micro turbine cycle was studied to carry out the simulation, the simulation result is reasonable.

Development of Process Simulation Models for Composite Technology

1995 ◽  
Vol 10 (1) ◽  
pp. 103-113 ◽  
Author(s):  
G. Di Vita ◽  
R. Ferraro ◽  
P. Perugini
Keyword(s):  
Process Simulation ◽  
Simulation Models

Simulation of the construction of cable-stayed bridges

1998 ◽  
Vol 25 (3) ◽  
pp. 490-499 ◽  
Author(s):  
Dulcy M Abraham ◽  
Daniel W Halpin
Keyword(s):  
Computer Simulation ◽  
Simulation Modeling ◽  
Simulation Models ◽  
Interstate Highways ◽  
Simulation Techniques ◽  
Pedestrian Bridges ◽  
Cantilever Construction ◽  
Fertile Area ◽  
Computer Simulation Techniques ◽  
Cable Stayed Bridges

Cable-stayed bridges are ideal for spanning natural barriers of wide rivers, deep valleys, or ravines, and for pedestrian bridges crossing wide interstate highways. Modern construction of cable-stayed bridges makes use of the segmental balanced cantilever techniques and involves many repetitive cycles of placing the concrete segments (both cast-in-place and precast) and supporting cables. It provides a fertile area for the application of computer simulation techniques for the planning and analysis of the process, particularly for studying the interaction of resources used in the construction phase and also for assessing the productivity of the construction processes. This paper employs MicroCYCLONE, a microcomputer-based simulation program, for the modeling and simulation of the construction of two cable-stayed bridges: the Dame Point Bridge in the state of Florida, U.S.A., and the Tsukuhara Bridge in Hyuougo, Japan. The paper will also provide a brief explanation of the suspended long traveler method used on the Tsukuhara Bridge, the simulation models developed to analyze the construction processes, and the results of sensitivity analyses.Key words: simulation, modeling, construction, cable-stayed bridges, resources, productivity, balanced cantilever construction.

Sign in / Sign up

Export Citation Format

Share Document