STERIC EFFECT IN THE MATRIX OF THE FOAM CONCRETE

This work reports on the incorporation of Flint and Kaolin rocks powders in the cement mortar in an attempt to improve its mechanical properties and produce an eco-friendly mortar. Flint and Kaolin powders are prepared by dry mechanical milling. The two powders are added separately to the mortars substituting cement partially. The two powders are found to improve the mechanical properties of the mortars. Hardness and compressive strength are found to increase with the increase of powders constituents in the cement mortars. In addition, the two powders affect water absorption and thermal conductivity of the mortar specimens which are desirable for construction applications. Kaolin is found to have a greater effect on the mechanical properties, water absorption, and thermal conductivity of the mortars than Flint. This behavior is discussed and analyzed based on the compositional and structural properties of the rocks powders.

Download Full-text

Mechanical Behavior of Brick Masonry in an Acidic Atmospheric Environment

Materials ◽

10.3390/ma12172694 ◽

2019 ◽

Vol 12 (17) ◽

pp. 2694 ◽

Cited By ~ 2

Author(s):

Shansuo Zheng ◽

Lihua Niu ◽

Pei Pei ◽

Jinqi Dong

Keyword(s):

Mechanical Properties ◽

Compressive Strength ◽

Fly Ash ◽

Acid Rain ◽

Cement Mortar ◽

Brick Masonry ◽

Atmospheric Environment ◽

Peak Strain ◽

Lime Mortar ◽

Attenuation Model

In order to evaluate the deterioration regularity for the mechanical properties of brick masonry due to acid rain corrosion, a series of mechanical property tests for mortars, bricks, shear prisms, and compressive prisms after acid rain corrosion were conducted. The apparent morphology and the compressive strength of the masonry materials (cement mortar, cement-lime mortar, cement-fly ash mortar, and brick), the shear behavior of the masonry, and the compression behavior of the masonry were analyzed. The resistance of acid rain corrosion for the cement-lime mortar prisms was the worst, and the incorporation of fly ash into the cement mortar did not improve the acid rain corrosion resistance. The effect of the acid rain corrosion damage on the mechanical properties for the brick was significant. With an increasing number of acid rain corrosion cycles, the compressive strength of the mortar prisms, and the shear and compressive strengths of the brick masonry first increased and then decreased. The peak stress first increased and then decreased whereas the peak strain gradually increased. The slope of the stress-strain curve for the compression prisms gradually decreased. Furthermore, a mathematical degradation model for the compressive strength of the masonry material (cement mortar, cement-lime mortar, cement-fly ash mortar, and brick), as well as the shear strength attenuation model and the compressive strength attenuation model of brick masonry after acid rain corrosion were proposed.

Download Full-text

Preparation of Electric- and Magnetic-Activated Water and Its Influence on the Workability and Mechanical Properties of Cement Mortar

Sustainability ◽

10.3390/su13084546 ◽

2021 ◽

Vol 13 (8) ◽

pp. 4546

Author(s):

Kaiyue Zhao ◽

Peng Zhang ◽

Bing Wang ◽

Yupeng Tian ◽

Shanbin Xue ◽

...

Keyword(s):

Magnetic Field ◽

Mechanical Properties ◽

Compressive Strength ◽

Flexural Strength ◽

Cement Paste ◽

Cement Mortar ◽

Environmental Issues ◽

Chemical Admixtures ◽

Untreated Water ◽

Alternating Voltage

Cement-based materials prepared with activated water induced by a magnetic field or electric field represent a possible solution to environmental issues caused by the worldwide utilization of chemical admixtures. In this contribution, electric- and magnetic-activated water have been produced. The workability and mechanical properties of cement mortar prepared with this activated water have been investigated. The results indicate that the pH and absorbance (Abs) values of the water varied as the electric and magnetic field changed, and their values increased significantly, exhibiting improved activity compared with that of the untreated water. In addition, activated water still retains activity within 30 min of the resting time. The fluidity of the cement paste prepared with electric-activated water was significantly larger than that of the untreated paste. However, the level of improvement differed with the worst performance resulting from cement paste prepared with alternating voltage activated water. In terms of mechanical properties, both compressive strength and flexural strength obtained its maximum values at 280 mT with two processing cycles. The compressive strength increased 26% as the curing time increased from 7 days to 28 days and flexural strength increased by 31%. In addition, through the introduction of magnetic-activated water into cement mortar, the mechanical strength can be maintained without losing its workability when the amount of cement is reduced.

Download Full-text

Assessment of the influence of fine aggregates on Portland cement mortar compressive strength

Results in Materials ◽

10.1016/j.rinma.2021.100182 ◽

2021 ◽

pp. 100182

Author(s):

Alberto Muciño ◽

Lauro Bucio ◽

Eligio Orozco ◽

Sofía Vargas ◽

Nora A. Pérez

Keyword(s):

Compressive Strength ◽

Portland Cement ◽

Cement Mortar ◽

Fine Aggregates

Download Full-text

Properties of Calcium Sulfoaluminate Cement Mortar Modified by Hydroxyethyl Methyl Celluloses with Different Degrees of Substitution

Molecules ◽

10.3390/molecules26082136 ◽

2021 ◽

Vol 26 (8) ◽

pp. 2136

Author(s):

Shaokang Zhang ◽

Ru Wang ◽

Linglin Xu ◽

Andreas Hecker ◽

Horst-Michael Ludwig ◽

...

Keyword(s):

Compressive Strength ◽

Flexural Strength ◽

Bond Strength ◽

Cement Mortar ◽

Retention Rate ◽

Methyl Cellulose ◽

Tensile Bond Strength ◽

Calcium Sulfoaluminate Cement ◽

Calcium Sulfoaluminate ◽

Cement Mortars

This paper studies the influence of hydroxyethyl methyl cellulose (HEMC) on the properties of calcium sulfoaluminate (CSA) cement mortar. In order to explore the applicability of different HEMCs in CSA cement mortars, HEMCs with higher and lower molar substitution (MS)/degree of substitution (DS) and polyacrylamide (PAAm) modification were used. At the same time, two kinds of CSA cements with different contents of ye’elimite were selected. Properties of cement mortar in fresh and hardened states were investigated, including the fluidity, consistency and water-retention rate of fresh mortar and the compressive strength, flexural strength, tensile bond strength and dry shrinkage rate of hardened mortar. The porosity and pore size distribution were also analyzed by mercury intrusion porosimetry (MIP). Results show that HEMCs improve the fresh state properties and tensile bond strength of both types of CSA cement mortars. However, the compressive strength of CSA cement mortars is greatly decreased by the addition of HEMCs, and the flexural strength is decreased slightly. The MIP measurement shows that HEMCs increase the amount of micron-level pores and the porosity. The HEMCs with different MS/DS have different effects on the improvement of tensile bond strength in different CSA cement mortars. PAAm modification can improve the tensile bond strength of HEMC-modified CSA cement mortar.

Download Full-text

Effect of Waste Glass on the Properties and Microstructure of Magnesium Potassium Phosphate Cement

Materials ◽

10.3390/ma14082073 ◽

2021 ◽

Vol 14 (8) ◽

pp. 2073

Author(s):

Qiubai Deng ◽

Zhenyu Lai ◽

Rui Xiao ◽

Jie Wu ◽

Mengliang Liu ◽

...

Keyword(s):

Compressive Strength ◽

Glass Powder ◽

Setting Time ◽

Potassium Phosphate ◽

Heat Of Hydration ◽

Waste Glass ◽

Hydration Heat ◽

Magnesium Potassium Phosphate Cement ◽

The Matrix ◽

Powder Content

Waste glass is a bulk solid waste, and its utilization is of great consequence for environmental protection; the application of waste glass to magnesium phosphate cement can also play a prominent role in its recycling. The purpose of this study is to evaluate the effect of glass powder (GP) on the mechanical and working properties of magnesium potassium phosphate cement (MKPC). Moreover, a 40mm × 40mm × 40mm mold was used in this experiment, the workability, setting time, strength, hydration heat release, porosity, and microstructure of the specimens were evaluated. The results indicated that the addition of glass powder prolonged the setting time of MKPC, reduced the workability of the matrix, and effectively lowered the hydration heat of the MKPC. Compared to an M/P ratio (MgO/KH2PO4 mass ratio) of 1:1, the workability of the MKPC with M/P ratios of 2:1 and 3:1 was reduced by 1% and 2.1%, respectively, and the peak hydration temperatures were reduced by 0.5% and 14.6%, respectively. The compressive strength of MKPC increased with an increase in the glass powder content at the M/P ratio of 1:1, and the addition of glass powder reduced the porosity of the matrix, effectively increased the yield of struvite-K, and affected the morphology of the hydration products. With an increase in the M/P ratio, the struvite-K content decreased, many tiny pores were more prevalent on the surface of the matrix, and the bonding integrity between the MKPC was weakened, thereby reducing the compressive strength of the matrix. At less than 40 wt.% glass powder content, the performance of MKPC improved at an M/P ratio of 1:1. In general, the addition of glass powders improved the mechanical properties of MKPC and reduced the heat of hydration.

Download Full-text

Feasible use of Recycled Foam Concrete in Cement Mortar

IOP Conference Series Materials Science and Engineering ◽

10.1088/1757-899x/936/1/012011 ◽

2020 ◽

Vol 936 ◽

pp. 012011

Author(s):

Evangeline Lalrinmawii ◽

Santosini Sahu ◽

Pradip Sarkar ◽

Robin Davis

Keyword(s):

Cement Mortar ◽

Foam Concrete

Download Full-text

Study on the Mechanical Properties and Frost Resistance of Recycled Concrete Prepared by Village Construction Wastes

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.418-420.406 ◽

2011 ◽

Vol 418-420 ◽

pp. 406-410

Author(s):

Jun Liu ◽

Yao Li ◽

Dan Dan Hong ◽

Yu Liu

Keyword(s):

Mechanical Properties ◽

Compressive Strength ◽

Frost Resistance ◽

Cement Mortar ◽

Strength Loss ◽

Recycled Concrete ◽

Recycled Aggregate ◽

Replacement Rate ◽

Concrete Mechanical Properties ◽

Better Than

Abstract. Recycled aggregate—rural building material wastes pretreated by cement mortar—are applied into concrete with different replacement rates: 0, 25%, 50%, 75%, and 100%. Results from measurements of compressive strength, cleavage tensile strength, mass loss after fast freeze-thaw cycles, and compressive strength loss indicate that a different recycled aggregate replacement rate certainly influences concrete mechanical properties and frost resistance. Recycled aggregate replacement rates less than 75% performs better than common concrete. Data from the 100% replacement rate is worse than that of rates less than 75% but still satisfy the general demands of GB standard on C30 concrete.

Download Full-text