scholarly journals COMPREHENSIVE ASSESSMENT OF THE EFFECTIVENESS OF THE DEVELOPMENT OF JOINT-STOCK COMPANIES IN THE BUILDING MATERIALS INDUSTRY

2021 ◽  
pp. 196-200
Author(s):  
Dekhkanov Sherzod Abdumutalibovich
Keyword(s):  
Coordinate System ◽  
Key Words ◽  
Building Materials ◽  
Comprehensive Assessment ◽  
Single Coordinate

The article discusses systems for the comprehensive assessment of the effectiveness of corporations, which allow linking various financial, production, personnel and other characteristics of corporations activities in a single coordinate system. KEY WORDS: Corporation, finance, production, personnel issues, descriptions of corporations, coordinates.

scholarly journals MEASUREMENT OF VERTICALITY CONSTRUCTION OF BUSHINGS FOR LABORATORY CONSTRUCTION MATERIALS

2014 ◽  
Vol 40 (4) ◽  
pp. 171-174 ◽  
Author(s):  
Petr Jadviščok ◽  
Rostislav Dandoš ◽  
Tomaš Jiroušek
Keyword(s):  
Coordinate System ◽  
Building Materials ◽  
Civil Engineering ◽  
Local Coordinate System ◽  
Construction Materials ◽  
Polar Method ◽  
Standard Equipment ◽  
Final Number ◽  
Loading Tests ◽  
Design And Manufacture

This contribution describes process which was used for verticality measurement of the bushings for laboratory construction materials in the pavilion of testing. This pavilion is newly built in VŠB-TU Ostrava, Faculty of Civil Engineering, as part of the Testing house of the building materials. The requirement of the building investor was to determine the verticality of the bushings placed between the first aboveground and the first underground floor. After the building finishing, the bushings with the diameter 70 mm will be used for loading tests of various building materials. The final number of bushings is 169, and they are placed lengthwise and crosswise in the step of 750 mm. The centres of the bushings were measured by polar method in pavilion local coordinate system. The precision of the bushing centres determination was }5 mm according to the investor´s requirement. The precision would not be followed if the standard equipment for reflector fixing was used. In that case, it was necessary to design and manufacture special tool in the shape of truncated cone. On the top part was placed central pivot for reflector with additional plate bubble.

scholarly journals Analysis of influence of natural and technogenic factors on architectural monuments sustainability within historical centre of Lviv

2014 ◽  
pp. 50-57
Author(s):  
Petro Voloshyn
Keyword(s):  
Key Words ◽  
Active Zone ◽  
Building Materials ◽  
Geological Environment ◽  
Soil Features ◽  
Natural Factors ◽  
Architectural Monument ◽  
Main Factors ◽  
Historical Centre

The main factors that influenced on sustainability of architectural monuments were considered. Among natural factors principle role belongs to presence of soils with sensor features in buildings active zone, and significant changes of those features under influence of technogenic press. Constructive features of buildings, kinds of building materials and their age belong to technogenic factors. Key words: architectural monument, sustainability, deformation, basement, geological environment, soil features.

scholarly journals Calibration of the Relative Orientation between Multiple Depth Cameras Based on a Three-Dimensional Target

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 3008 ◽  
Author(s):  
Zhe Liu ◽  
Zhaozong Meng ◽  
Nan Gao ◽  
Zonghua Zhang
Keyword(s):  
Coordinate System ◽  
Camera Calibration ◽  
Three Dimensional ◽  
Field Of View ◽  
Depth Information ◽  
Depth Camera ◽  
Depth Cameras ◽  
Calibration Methods ◽  
3D Shape Reconstruction ◽  
Single Coordinate

Depth cameras play a vital role in three-dimensional (3D) shape reconstruction, machine vision, augmented/virtual reality and other visual information-related fields. However, a single depth camera cannot obtain complete information about an object by itself due to the limitation of the camera’s field of view. Multiple depth cameras can solve this problem by acquiring depth information from different viewpoints. In order to do so, they need to be calibrated to be able to accurately obtain the complete 3D information. However, traditional chessboard-based planar targets are not well suited for calibrating the relative orientations between multiple depth cameras, because the coordinates of different depth cameras need to be unified into a single coordinate system, and the multiple camera systems with a specific angle have a very small overlapping field of view. In this paper, we propose a 3D target-based multiple depth camera calibration method. Each plane of the 3D target is used to calibrate an independent depth camera. All planes of the 3D target are unified into a single coordinate system, which means the feature points on the calibration plane are also in one unified coordinate system. Using this 3D target, multiple depth cameras can be calibrated simultaneously. In this paper, a method of precise calibration using lidar is proposed. This method is not only applicable to the 3D target designed for the purposes of this paper, but it can also be applied to all 3D calibration objects consisting of planar chessboards. This method can significantly reduce the calibration error compared with traditional camera calibration methods. In addition, in order to reduce the influence of the infrared transmitter of the depth camera and improve its calibration accuracy, the calibration process of the depth camera is optimized. A series of calibration experiments were carried out, and the experimental results demonstrated the reliability and effectiveness of the proposed method.

A re-examination of the strain field around a simple pile

1994 ◽  
Vol 31 (2) ◽  
pp. 303-308 ◽  
Author(s):  
V. Silvestri ◽  
C. Tabib
Keyword(s):  
Analytical Solution ◽  
Coordinate System ◽  
Shear Strain ◽  
Key Words ◽  
Strain Field ◽  
Technical Note ◽  
Spherical Coordinate System ◽  
Spherical Coordinate ◽  
Streaming Motion

This technical note describes the analysis of the strain field around a simple pile. The analytical solution is obtained by using a spherical coordinate system of reference. It is shown that the expressions for the various strains are very simple. Streaming motions and octahedral shear strain contours are presented in graphical forms. Key words : simple pile, streaming motion, strain field.

scholarly journals Analisis Vegetasi dan Potensi Hutan Bukan Kayu di Kawasan Hutan Kampung Pagai, Distrik Airu, Kabupaten Jayapura, Papua

2018 ◽  
Vol 4 (2) ◽  
pp. 54-62
Author(s):  
Rosye H.R. Tanjung ◽  
Suharno Suharno ◽  
Jhon D. Kalor
Keyword(s):  
Everyday Life ◽  
Key Words ◽  
Tree Species ◽  
Building Materials ◽  
Fruits And Vegetables ◽  
Forest Products ◽  
Local People ◽  
Human Needs ◽  
Non Timber Forest Products ◽  
Potential Use

Forest is a resources system which has prospective materials to be used for human needs. Local people within everyday life are very dependent on the natural surroundings, as well as the use of nature for human needs tend to increase. The purpose of this research is to do the analysis of vegetation and determine the potential use of non-timber forest products in Kampung Pagai, Airu District, Jayapura. The method used for the analysis of vegetation is the square plot, while the method to figure out the potential of non-timber forest adopts the method developed by Waluyo (2004). The results showed that there are at least 39 species of trees belonging to the 26 families. Regeneration of trees showed the condition which is good based on the diversity of tree species in the Sapling level, especially matoa (Pometia pinnata), kayu besi (Instia bijuga), and various plants of Ficus ssp. The potential uses of non-timber forest are also quite high. Several types of plants can be used as building materials and accessories, medicines, ornaments (including orchids), fruits, and vegetables. Key words: forest, vegetation, non-timber forest product, Airu District, Jayapura.

scholarly journals ABOUT METHODS OF FALSIFICATION OF TRACKS OF PAPILLARY PATTERNS OF HUMAN HANDS AND THE POSSIBILITIES OF THEIR DETECTION DURING DACTYLOSCOPIC (FINGERPRINT) EXAMINATIONS

2019 ◽  
pp. 464-480
Author(s):  
R. Yakymenko
Keyword(s):  
Key Words ◽  
Integrated Assessment ◽  
Comprehensive Assessment ◽  
Diagnostic Study ◽  
Diagnostic Research ◽  
Expert Practice ◽  
Human Hands

In the article, based on the generalization of expert practice of fingerprinting studies, the methods of falsifying traces of human papillary patterns are described. The signs displayed in the traces when using one or another method of fraud are made. The stage of the diagnostic study of fingerprint objects is described based on the examples of several expert studies from practice. As examples, the signs characterizing the transfer of traces of papillary patterns of human hands from one object to another are given. The importance of the diagnostic study during repeated fingerprint examinations is indicated. Descriptions and illustrations of comparison of signs of falsification (transfer) identified in the traces are given. An algorithm for conducting such studies and an approach to integrated assessment is described. It justifies the need for a stage of diagnostic research with the involvement of experts from other specialties (biologists, chemists, physicists, etc.) to establish the origin of the traces. According to the results of the analysis, recommendations were given regarding an integrated expert approach to the assessment of signs which were reflected in the traces identified at the research sites, and on a comprehensive assessment of the signs of the trace-receiving surface from which the traces of human papillary patterns were examined. The article also substantiates the need to develop guidelines for the diagnostic study of traces of papillary patterns of human hands to determine the method of their origin. Key words: fingerprinting, papillary patterns, falsification, artificial traces.

Gravitational collapse in a single coordinate system

1995 ◽  
Vol 63 (11) ◽  
pp. 991-999 ◽  
Author(s):  
Ronald Gautreau ◽  
Jeffrey M. Cohen
Keyword(s):  
Coordinate System ◽  
Gravitational Collapse ◽  
Single Coordinate

Infrared and Raman microscopy of fowl feather barb

1991 ◽  
Vol 69 (11) ◽  
pp. 1752-1757 ◽  
Author(s):  
Masamichi Tsuboi ◽  
Fumiko Kaneuchi ◽  
Teruki Ikeda ◽  
Kiso Akahane
Keyword(s):  
Raman Scattering ◽  
Laser Beam ◽  
Coordinate System ◽  
Key Words ◽  
Raman Spectra ◽  
Spectroscopic Measurement ◽  
Sheet Structure ◽  
Infrared Microscope ◽  
Polypeptide Chains ◽  
Pleated Sheet

A fowl feather barb 10 μm in thickness was subjected to a polarized infrared spectroscopic measurement by the use of a microscopic device. Nearly 50% of its peptide groups were found to give the 1633 and 1684 cm−1 bands characteristic of the antiparallel-chain pleated sheet structure, and the remaining 50% gave the 1659 cm−1 band assignable to unordered polypeptide chains. The orientation of the pleated sheet was determined to be on average θ = 52° and χ = 39°, where θ and χ are the angles for the transformation of the XYZ coordinate system fixed on the pleated sheet and the abc coordinate system fixed on the sample barb. The Raman spectra of the barb were also examined with another microscopic device and a 488.0-nm laser beam. A sharp aa component of the Raman scattering tensor was observed at 1667 cm−1. Based on this fact, a revised set of parameters for the vibrational couplings among the peptide groups in the pleated sheet has been proposed. Some discussions have been made on the amide I Raman tensor of the antiparallel-chain pleated sheet. Key words: fowl feather barb, Raman microscope, infrared microscope, antiparallel-chain pleated sheet, Raman scattering tensor.

scholarly journals PENGARUH LIMBAH ASBES DAN FLY ASH DALAM PEMBUATAN KUSEN BETON

2019 ◽  
Vol 18 (1) ◽  
Author(s):  
M. Shofi’ul Amin ◽  
Enes Ariyanto S ◽  
Zulis Erwanto ◽  
Aris Purwanto
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Key Words ◽  
Building Materials ◽  
Residential Construction ◽  
Additional Material ◽  
Concrete Frame ◽  
Door Frame

ABSTRACTDemand for building materials such as lumber keep on increase, especially as materials for door frames, vents, roofing and other construction in residential construction. Concrete frame was one alternatives that could be used as a door frame. Along with the advancement on development of concrete sills, many developed of design from concrete frame, but the utilization of waste as a mixture of the concrete frame has not been done. This research made mortar as specimen using additional material asbestos waste and fly ash. The percentage of mixing was 1pc : 5Ps + (30% waste). The results of research gained the density asbestos waste and fly ash were 2.08 gr/cm³ and 2.58 gr/cm³. The compressive strength of mortar with the addition of asbestos waste has a lower compressive strength that was the age of 7, 14, 21, and 28 day compressive strength of mortar respectively 14.67 kg/cm², 26.67 kg/cm², 90.67 kg/cm², and 104.00 kg/cm². While the value of the compressive strength of mortar with a mixture of fly ash waste at ages 7,14,21, and 28 days respectively were 16.00 kg/cm², 42.67 kg/cm², 112.00 kg /cm², and 2130.67 kg /cm².Key words : Door frame of concrete, asbestos waste, fly ash, mortarABSTRAKKebutuhan material bangunan seperti kayu terus meningkat terutama sebagai bahan pembuatan kusen pintu, ventilasi, konstruksi atap dan lain sebagainya dalam kontruksi perumahan. Kusen beton merupakan salah satu alternatif yang bisa digunakan sebagai kusen pintu. Seiring dengan kemajuan perkembangan mengenai kusen beton, banyak sekali dikembangkan desain dari kusen beton. Pemanfaatan limbah asbes dan fly ash bertujuan mengurangi komposisi semen untuk campuran pembuatan kusen beton. Pada penelitian ini berbentuk mortar dengan menggunakan bahan tambah limbah asbes dan fly ash. Prosentase pencampuran 1Pc : 5 Ps + (30% limbah). Pengujian yang dilakukan yaitu berat jenis, resapan pasir, kadar lumpur pasir, serta kuat tekan. Berdasarkan hasil penelitian yang didapatkan berat jenis limbah asbes sebesar 2,08 gr/cm³, dan berat jenis limbah fly ash 2,58 gr/cm³. Nilai kuat tekan mortar dengan tambahan limbah asbes memiliki kuat tekan yang lebih rendah yaitu pada umur 7, 14, 21, dan 28 hari kuat tekan mortar berturut – turut sebesar 14,67 kg/cm², 26,67 kg/cm², 90,67 kg/cm², dan 104,00 kg/cm². Sedangkan nilai kuat tekan mortar dengan campuran limbah fly ash pada umur 7,14,21, dan 28 hari berturut – turut sebesar 16,00 kg/cm², 42,67 kg/cm², 112,00 kg/cm², dan 130,67 kg/cm².Kata kunci : Kusen beton, limbah asbes, fly ash, mortar

GIS technologies for integrating cartographic materials into a single coordinate system

2019 ◽  
Author(s):  
O. Rodzinska ◽  
I. Perovych ◽  
L. Perovych ◽  
O. Ludchak
Keyword(s):  
Coordinate System ◽  
Gis Technologies ◽  
Single Coordinate
Sign in / Sign up

Export Citation Format

Share Document