scholarly journals Optimasi Pengaruh Penambahan Hidrogen Peroksida Terhadap Kualitas Pulp Di EOP Stage

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Rachmawati Apriani
Keyword(s):  
Kappa Number

Penelitian dengan judul “Optimasi Pengaruh Penambahan Hidrogen Peroksida Terhadap Kualitas Pulp di EOP Stage” bertujuan untuk mengetahui dosis optimal yang memenuhi standar kualitas EOP Stage. Proses pemutihan di EOP (Ektraksi Oksidasi Peroksida) Stage merupakan proses pemutihan pulp dengan menggunakan bahan kimia yaitu H2O2. Parameter yang digunakan yaitu kappa number, viscosity, dan brightness. Pulp di bleaching menggunakan 5 variasi dosis yaitu 0,3 ml H2O2, 0,4 ml H2O2, 0,6 ml H2O2, 0,7 ml H2O2 dan 0,9 ml H2O2. Dari semua variasi dilakukan disimpulkan bahwa dosis yang optimal untuk menghasilkan kualitas pulp yang baik adalah 0,6 ml dan 0,7 ml dengan hasil nilai kappa number untuk 0,6 ml H2O2 adalah 1,3 dan 1,4 dan dosis 0,7 ml H2O2 adalah 1,14 dan 1,2. Lalu viscosity dari 0,6 ml H2O2 adalah 708 cm3/g dan 713 cm3/g sedangkan pada dosis 0,7 ml H2O2 adalah 703 cm3/g dan 707 cm3/g. Kemudian brightness dari 0,6 ml H2O2 adalah 79,62% dan 79,45% sedangkan pada dosis 0,7 ml H2O2 adalah 80,73% dan 80,12%.

Bleaching ability of pre-hydrolyzed pulps in the context of a biorefinery mill

TAPPI Journal ◽  
2013 ◽  
Vol 12 (11) ◽  
pp. 49-53 ◽  
Author(s):  
CHRISTINE CHIRAT ◽  
LUCIE BOIRON ◽  
DOMINIQUE LACHENAL
Keyword(s):  
Carbon Content ◽  
Acid Hydrolysis ◽  
13C Nmr ◽  
Kraft Lignin ◽  
Kappa Number ◽  
Hydroxyl Groups ◽  
Kraft Pulps ◽  
Quaternary Carbon ◽  
Oxygen Delignification

Autohydrolysis and acid hydrolysis treatments were applied on mixed softwood chips. The cooking ability was studied by varying the alkali and duration of the cook. Pulps with kappa numbers varying from 30 to 70 were obtained. The bleaching ability of these pulps was studied and compared to control kraft pulps. The prehydrolyzed pulps were shown to be more efficiently delignified by oxygen than the control kraft pulps starting from the same kappa number. Furthermore, the final bleaching was also easier for these pulps. It was also shown that extensive oxygen delignification applied on high-kappa pre-hydrolyzed pulps could be a way to improve the overall yield, which is a prerequisite for the development of such biorefinery concepts. Lignin was isolated from the control kraft and the two pre-hydrolyzed kraft pulps and analyzed by 13C NMR. Lignins from pre-hydrolyzed kraft pulps had similar free phenolic groups content to the control kraft lignin, but their aliphatic hydroxyl groups and β-O-4 content were lower than for the control lignin. The quaternary carbon content was the same for all the samples.

Chemical, anatomical, and technology aspects of Eucalyptus benthamii and Eucalyptus dunii for use in an integrated pulp and paper mill

TAPPI Journal ◽  
2015 ◽  
Vol 14 (2) ◽  
pp. 73-81 ◽  
Author(s):  
GISELY SAMISTRARO ◽  
PETER W. HART ◽  
JORGE LUIZ COLODETTE ◽  
RICARDO PAIM
Keyword(s):  
Energy Levels ◽  
Black Liquor ◽  
Basic Density ◽  
Paper Mill ◽  
Frost Tolerance ◽  
Strength Properties ◽  
Kappa Number ◽  
Pulp Yield ◽  
Chemical Compositions ◽  
Physical Strength

Eucalyptus dunii has been commercially used in southern Brazil because of its relatively good frost tolerance and adequate productivity in the winter months. More recently, interest has grown in cultivating Eucalyptus benthamii Maiden & Cambage, which presents even superior frost tolerance compared to E. dunii and is highly productive as well. The quality of E. benthamii for pulp production is not yet proven. Thus, the chemical, anatomical, and technological aspects of pulp made from E. benthamii were compared with those of E. dunii for unbleached paper production. Samples of E. benthamii chips were obtained and analyzed for their basic density, chemical composition, higher heating value, trace elemental analysis, and chip size distribution. The chips were kraft cooked using conditions that produced a 74 ± 6 kappa number. The pulps were characterized for kappa number, yield, viscosity, and morphologic characteristics (e.g., length, wall thickness, and coarseness). Black liquor was analyzed for total solids, organics, inorganics, sodium sulfide, sodium hydroxide, and sodium carbonate. Brownstocks were beaten at five different energy levels in a Valley beater, and the physical strength properties of 120 g/m² handsheets were measured to develop a beater curve. The results of this study showed differences in delignification between the two woods and lower pulp yield for E. benthamii , which are related to their chemical compositions and basic densities. The E. benthamii studied in this work exhibited higher amounts of lignin and extractives, lower carbohydrate content, and lower basic density. However, cooking a blend of the two woods afforded good results in pulping and in physical pulp properties.

Prehydrolysis kraft pulping of jute cutting and caddis mixture for rayon production

TAPPI Journal ◽  
2019 ◽  
Vol 18 (5) ◽  
pp. 287-293 ◽  
Author(s):  
JANNATUN NAYEEM ◽  
M. SARWAR JAHAN ◽  
RAZIA SULTANA POPY ◽  
M. NASHIR UDDIN ◽  
M.A. QUAIYYUM
Keyword(s):  
Kraft Pulping ◽  
Kappa Number ◽  
Pulp Yield ◽  
Solid Residue ◽  
Rayon Production ◽  
Kraft Cooking ◽  
Prehydrolysis Kraft

Jute cutting, jute caddis, and cutting-caddis mixtures were prehydrolyzed by varying time and temperature to get about 90% prehydrolyzed yield. At the conditions of 170°C for 60 min of prehydrolysis, the yield for 100% jute cutting was 76.3%, while the same for jute caddis was only 67.9%. But with prehydrolysis at 150°C for 60 min, the yield was 90% for jute cutting, where 49.94% of original pentosan was dissolved and prehydrolysis of jute caddis at 140°C in 60 min yielded 86.4% solid residue. Jute cutting-caddis mixed prehydrolysis was done at 140°C for 30 min and yielded 92% solid residue for 50:50 cutting-caddis mixtures, where pentosan dissolution was only 29%. Prehydrolyzed jute cutting, jute caddis, and cutting-caddis mixtures were subsequently kraft cooked. Pulp yield was only 40.9% for 100% jute cutting prehydrolyzed at 170°C for 60 min, which was 10.9% lower than the prehydrolysis at 140°C. For jute cutting-caddis mixed prehydrolysis at 140°C for 45 min followed by kraft cooking, pulp yield decreased by 3.3% from the 100% cutting to 50% caddis in the mixture, but 75% caddis in the mixture decreased pulp yield by 6.7%. The kappa number 50:50 cutting-caddis mixture was only 11.3. Pulp bleachability improved with increasing jute cutting proportion in the cutting-caddis mixture pulp.

Does the kappa number method accurately reflect lignin content in nonwood pulps?

TAPPI Journal ◽  
2018 ◽  
Vol 17 (11) ◽  
pp. 611-617
Author(s):  
Sabrina Burkhardt
Keyword(s):  
Lignin Content ◽  
Paper Industry ◽  
Pulp And Paper Industry ◽  
Original Data ◽  
Kappa Number ◽  
Klason Lignin ◽  
Organic Functional Groups ◽  
Pulp Properties ◽  
Wood Pulps ◽  
Hexenuronic Acid

The traditional kappa number method was developed in 1960 as a way to more quickly determine the level of lignin remaining in a completed or in-progress pulp. A significantly faster approach than the Klason lignin procedure, the kappa number method is based on the reaction of a strong oxidizing agent (KMnO4) with lignin and small amounts of other organic functional groups present in the pulp, such as hexenuronic acid. While the usefulness of the kappa number for providing information about bleaching requirements and pulp properties has arguably transformed the pulp and paper industry, it has been mostly developed for kraft, sulfite, and soda wood pulps. Nonwood species have a different chemical makeup than hardwood or softwood sources. These chemical differ-ences can influence kappa and Klason measurements on the pulp and lead to wide ranges of error. Both original data from Sustainable Fiber Technologies’ sulfur and chlorine-free pulping process and kappa and Klason data from various nonwood pulp literature sources will be presented to challenge the assumption that the kappa number accurately represents lignin content in nonwood pulps.

The influence of kappa number and surface energy on paper-to-paper friction

1999 ◽  
Vol 14 (3) ◽  
pp. 204-208 ◽  
Author(s):  
Marie Bäckström ◽  
Christer Fellers ◽  
Myat Htun
Keyword(s):  
Surface Energy ◽  
Kappa Number

Characterization of chia plant (Salvia hispanica) for pulping

TAPPI Journal ◽  
2020 ◽  
Vol 19 (10) ◽  
pp. 511-524
Author(s):  
TASLIMA FERDOUS ◽  
M.A. QUAIYYUM ◽  
KAZI M. YASIN ARAFAT ◽  
M. SARWAR JAHAN
Keyword(s):  
Kappa Number ◽  
Pulp Yield ◽  
Anatomical Features ◽  
Alkaline Peroxide ◽  
Parenchyma Cells ◽  
Flexibility Coefficient ◽  
Anatomical Properties ◽  
Peroxyformic Acid ◽  
Syringyl To Guaiacyl Ratio

In this paper, chia plant was characterized in terms of chemical, morphological, and anatomical properties. Chia plant was characterized with low α-cellulose (30.5%); moderate lignin (23.2%) with syringyl to guaiacyl ratio of 1.41; and shorter fiber length (0.67 mm) with thinner cell wall (1.91 μm) and good flexibility coefficient (71.44). Anatomical features showed that chia plant consists of vessels, fibers, parenchyma cells, and collenchyma cells. Chia plant pulping was evaluated in soda-anthraquinone (soda-AQ) and formic acid/peroxyformic acid (FA/PFA) processes. Chia plant was difficult to delignify in the alkaline process. The FA/PFA process produced higher pulp yield at the same kappa number than the soda-AQ process. Unbleached soda-AQ chia pulp exhibited good proper-ties in terms of tensile, bursting, and tearing strengths, even at the unrefined stage, due to high drainability of the pulps. Alkaline peroxide bleached FA/PFA pulp exhibited better papermaking properties and 2% higher brightness than the D0(EP)D1 bleached soda-AQ pulp.

Kraft pulping and bleaching of Eichhornia crassipes (Mart.) Solms (water hyacinth)

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 9243-9264
Author(s):  
Luis Fernando Pintor-Ibarra ◽  
José de Jesús Rivera-Prado ◽  
Sarai Ramos-Vargas ◽  
Teófilo Escoto-García ◽  
Nancy Eloisa Rodríguez-Olalde ◽  
...  
Keyword(s):  
Water Hyacinth ◽  
Eichhornia Crassipes ◽  
Kraft Pulping ◽  
Kappa Number ◽  
Pulp Yield ◽  
Inorganic Elements ◽  
Wood Fibers ◽  
Pulp Bleaching ◽  
Cellulosic Pulp ◽  
Unbleached Pulp

Eichhornia crassipes (water hyacinth) was pulped by means of a kraft pulping process with reagent loads of 10 and 20% on a dry matter basis to determine yield, rejects, kappa number, and ash. Fiber classification, brightness, opacity, and viscosity were measured in the brown pulp. Bleaching was performed by means of an O1O2D1(PO)D2HD3 sequence. Yield, kappa number, pH, ash, brightness, opacity, and viscosity were evaluated in the bleached pulp. Finally, a microanalysis of inorganic elements was carried out in both the bleached and unbleached pulp ash. The highest kraft pulp yield was 26.4%, with a 10% reagent load at 120 °C and 30 minutes cooking. It was determined that E. crassipes cellulosic pulp contains large amounts of fines. Results of the bleaching sequence indicate low brightness (58.0 %) and low viscosity (6.43 cP). The most abundant inorganic elements in the ash of both bleached and unbleached pulp were Ca, Mg, P, and Si. These results suggest that E. crassipes biomass might complement cellulosic fibers in pulping processes of low yield, such as the wood fibers used to produce handmade paper.

Deep eutectic solvent delignification: Impact of initial lignin

BioResources ◽  
2017 ◽  
Vol 12 (4) ◽  
pp. 7301-7310
Author(s):  
Veronika Majová ◽  
Silvia Horanová ◽  
Andrea Škulcová ◽  
Jozef Šima ◽  
Michal Jablonský
Keyword(s):  
Lactic Acid ◽  
Oxalic Acid ◽  
Lignin Content ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Deep Eutectic Solvents ◽  
Kappa Number ◽  
Kraft Pulps ◽  
Oxygen Delignification ◽  
Detailed Understanding

This study aimed to resolve the issue of the lack of detailed understanding of the effect of initial lignin content in hardwood kraft pulps on pulp delignification by deep eutectic solvents. The authors used Kappa number of the concerned pulp, intrinsic viscosity, and selectivity and efficiency of delignification as the parameters of the effect. The pulp (50 g oven dry pulp) was treated with four different DESs systems based on choline chloride with lactic acid (1:9), oxalic acid (1:1), malic acid (1:1), and system alanine:lactic acid (1:9); the results were compared to those reached by oxygen delignification. The results showed that the pulp with a higher initial lignin content had a greater fraction of easily removed lignin fragments.

Sign in / Sign up

Export Citation Format

Share Document