scholarly journals The analysis of the impact of environmental factors on turbine performance, develpoment of the models relating the periods between maintenances with selected maintenance factors

2021 ◽  
pp. 1-10
Author(s):  
Magdalena THIELMANN
Keyword(s):  
Environmental Factors ◽  
Gas Turbines ◽  
Time Model ◽  
Reliability Models ◽  
Average Value ◽  
Turbine Performance ◽  
Maintenance Factors ◽  
Maintenance And Inspection ◽  
The Impact

There are currently around 18,000 commissioned Gas Turbines in use worldwide, with almost 7,500 long-term service agreements[1]. At the same time, orders for new units increase year by year, and after a decrease in production in 2020 from 353 to 328 new units, from 2022 onwards, the level is planned to rise to the previous level of growth. Gas turbines operate worldwide and are exposed to variations in environmental conditions, such as changes in humidity, temperature, and salinity, which can significantly affect the efficiency and faster degradation of individual components. Based on the unit's maintenance report, there are more than 1,940 event alerts annually. A need exists to create a more dynamic analytical and numerical model that determines the impact of environmental variables on gas turbine stability. It is necessary to analyze and improve existing reliability models, which vary due to configurations and the impact of working conditions. The first step should be an analysis of the impact of environmental factors on turbine performance. This paper describes how the maintenance and inspection model developed from an average value over time model to a model tracking the actual degradation of gas turbines. It includes a comparison ofthree models used in the research, considering the developed methodology for selecting input parameters, their correlation, and their appropriateness for use in further analyses.

scholarly journals The diversity of the circumgalactic medium around z = 0 Milky Way-mass galaxies from the Auriga simulations

2019 ◽  
Vol 488 (1) ◽  
pp. 135-152 ◽  
Author(s):  
Maan H Hani ◽  
Sara L Ellison ◽  
Martin Sparre ◽  
Robert J J Grand ◽  
Rüediger Pakmor ◽  
...  
Keyword(s):  
Star Formation ◽  
Environmental Factors ◽  
Active Galactic Nucleus ◽  
Observational Studies ◽  
Milky Way ◽  
Narrow Range ◽  
Gas Reservoirs ◽  
Circumgalactic Medium ◽  
The Impact

ABSTRACT Galaxies are surrounded by massive gas reservoirs (i.e. the circumgalactic medium; CGM) which play a key role in their evolution. The properties of the CGM, which are dependent on a variety of internal and environmental factors, are often inferred from absorption line surveys which rely on a limited number of single lines-of-sight. In this work we present an analysis of 28 galaxy haloes selected from the Auriga project, a cosmological magneto-hydrodynamical zoom-in simulation suite of isolated Milky Way-mass galaxies, to understand the impact of CGM diversity on observational studies. Although the Auriga haloes are selected to populate a narrow range in halo mass, our work demonstrates that the CGM of L⋆ galaxies is extremely diverse: column densities of commonly observed species span ∼3 − 4 dex and their covering fractions range from ${\sim } 5$ to $90{{\ \rm per\ cent}}$. Despite this diversity, we identify the following correlations: 1) the covering fractions (CF) of hydrogen and metals of the Auriga haloes positively correlate with stellar mass, 2) the CF of H i, C iv, and Si ii anticorrelate with active galactic nucleus luminosity due to ionization effects, and 3) the CF of H i, C iv, and Si ii positively correlate with galaxy disc fraction due to outflows populating the CGM with cool and dense gas. The Auriga sample demonstrates striking diversity within the CGM of L⋆ galaxies, which poses a challenge for observations reconstructing CGM characteristics from limited samples, and also indicates that long-term merger assembly history and recent star formation are not the dominant sculptors of the CGM.

Crude Oil Burning Experience in MS5001P Gas Turbines

1984 ◽  
Vol 106 (4) ◽  
pp. 812-818 ◽  
Author(s):  
W. J. Bunz ◽  
G. N. Ziady ◽  
H. vonE. Doering ◽  
R. J. Radice
Keyword(s):  
Crude Oil ◽  
Gas Turbines ◽  
Peak Load ◽  
Wash Water ◽  
Eastern Province ◽  
Turbine Performance ◽  
Purification System ◽  
On Line ◽  
Cleaning Methods ◽  
The Impact

At Qaisumah, Saudi Arabia, there are four GE MS5001P Gas Turbines operated by the Saudi Consolidated Electric Company in the Eastern Province (SCECO East). The Power Plant is not connected to the main SCECO grid and experiences near-capacity peak load demands in the summer months. Its remoteness and proximity to the Trans-Arabian Pipeline (TAPLINE) dictates the burning of Light Saudi Arabian Crude Oil which is desalted by centrifugal purification without the addition of wash water. Eliminating the need for wash water is important because of the scarcity of water at this site. Power loss is controlled and shutdowns minimized during the critical summer months by removing the ash accumulation on the turbine components by on-line nutshell cleaning. This paper describes the first application of this waterless (dry centrifuge) fuel purification system and the impact of various turbine cleaning methods (particularly on-line nutshelling) on turbine performance, availability, and maintenance.

Immunological footprint: the development of a child's immune system in environments rich in microorganisms and parasites

Parasitology ◽  
2011 ◽  
Vol 138 (12) ◽  
pp. 1508-1518 ◽  
Author(s):  
YENNY DJUARDI ◽  
LINDA J. WAMMES ◽  
TANIAWATI SUPALI ◽  
ERLIYANI SARTONO ◽  
MARIA YAZDANBAKHSH
Keyword(s):  
Immune System ◽  
Environmental Factors ◽  
Later Life ◽  
Third Party ◽  
Middle Income ◽  
Middle Income Countries ◽  
Geographical Regions ◽  
Micro Organisms ◽  
The Impact

SUMMARYThe shaping of a child's immune system starts in utero, with possible long-term consequences in later life. This review highlights the studies conducted on the development of the immune system in early childhood up to school-age, discussing the impact that environmental factors may have. Emphasis has been put on studies conducted in geographical regions where exposure to micro-organisms and parasites are particularly high, and the effect that maternal exposures to these may have on an infant's immune responses to third-party antigens. In this respect we discuss the effect on responses to vaccines, co-infections and on the development of allergic disorders. In addition, studies of the impact that such environmental factors may have on slightly older (school) children are highlighted emphasizing the need for large studies in low to middle income countries, that are sufficiently powered and have longitudinal follow-up components to understand the immunological footprint of a child and the consequences throughout life.

scholarly journals Industrial Gas Turbine Performance: Compressor Fouling and On-Line Washing

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Uyioghosa Igie ◽  
Pericles Pilidis ◽  
Dimitrios Fouflias ◽  
Kenneth Ramsden ◽  
Panagiotis Laskaridis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Engine Performance ◽  
Operating Conditions ◽  
Compressor Cascade ◽  
Compressor Blades ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
On Line ◽  
The Impact

Industrial gas turbines are susceptible to compressor fouling, which is the deposition and accretion of airborne particles or contaminants on the compressor blades. This paper demonstrates the blade aerodynamic effects of fouling through experimental compressor cascade tests and the accompanied engine performance degradation using turbomatch, an in-house gas turbine performance software. Similarly, on-line compressor washing is implemented taking into account typical operating conditions comparable with industry high pressure washing. The fouling study shows the changes in the individual stage maps of the compressor in this condition, the impact of degradation during part-load, influence of control variables, and the identification of key parameters to ascertain fouling levels. Applying demineralized water for 10 min, with a liquid-to-air ratio of 0.2%, the aerodynamic performance of the blade is shown to improve, however most of the cleaning effect occurred in the first 5 min. The most effectively washed part of the blade was the pressure side, in which most of the particles deposited during the accelerated fouling. The simulation of fouled and washed engine conditions indicates 30% recovery of the lost power due to washing.

The Impact of Atmospheric Conditions on Gas Turbine Performance

1990 ◽  
Vol 112 (4) ◽  
pp. 590-596 ◽  
Author(s):  
A. A. El Hadik
Keyword(s):  
Relative Humidity ◽  
Ambient Temperature ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Arabian Gulf ◽  
Inlet Temperature ◽  
Atmospheric Conditions ◽  
Design Factor ◽  
Turbine Performance ◽  
The Impact

In a hot summer climate, as in Kuwait and other Arabian Gulf countries, the performance of a gas turbine deteriorates drastically during the high-temperature hours (up to 60°C in Kuwait). Power demand is the highest at these times. This necessitates an increase in installed gas turbine capacities to balance this deterioration. Gas turbines users are becoming aware of this problem as they depend more on gas turbines to satisfy their power needs and process heat for desalination due to the recent technical and economical development of gas turbines. This paper is devoted to studying the impact of atmospheric conditions, such as ambient temperature, pressure, and relative humidity on gas turbine performance. The reason for considering air pressures different from standard atmospheric pressure at the compressor inlet is the variation of this pressure with altitude. The results of this study can be generalized to include the cases of flights at high altitudes. A fully interactive computer program based on the derived governing equations is developed. The effects of typical variations of atmospheric conditions on power output and efficiency are considered. These include ambient temperature (range from −20 to 60°C), altitude (range from zero to 2000 m above sea level), and relative humidity (range from zero to 100 percent). The thermal efficiency and specific net work of a gas turbine were calculated at different values of maximum turbine inlet temperature (TIT) and variable environmental conditions. The value of TIT is a design factor that depends on the material specifications and the fuel/air ratio. Typical operating values of TIT in modern gas turbines were chosen for this study: 1000, 1200, 1400, and 1600 K. Both partial and full loads were considered in the analysis. Finally the calculated results were compared with actual gas turbine data supplied by manufacturers.

Strategic Culture and Environmental Dimensions as Determinants of Anomie in Publicly-Traded and Privately-Held Firms

2011 ◽  
Vol 21 (3) ◽  
pp. 473-502 ◽  
Author(s):  
Jean L. Johnson ◽  
Kelly D. Martin ◽  
Amit Saini
Keyword(s):  
Environmental Factors ◽  
Organizational Factors ◽  
Strategic Flexibility ◽  
Publicly Traded ◽  
Technological Turbulence ◽  
Ethics Research ◽  
Strategic Aggressiveness ◽  
The Impact ◽  
Privately Held

ABSTRACT:Anomie is a condition in which normative guidelines for governing conduct are absent. Using survey data from a sample of U.S. manufacturing firms, we explore the impact of internal (cultural) and external (environmental) determinants of organizational anomie. We suggest that four internal organizational factors can generate or suppress organizational anomie, including strategic aggressiveness, long-term orientation, competitor orientation, and strategic flexibility. Similarly, we argue that external contextual factors, including competitive intensity and technological turbulence, can influence organizational anomie. We extend anomie and ethics research by considering the impact of these firm cultural and environmental factors according to whether firms are publicly-traded or privately-held. Findings demonstrate that a number of firm cultural and environmental factors can generate or reduce anomie in firms. Moreover, strategic aggressiveness, long-term orientation, and strategic flexibility influence organizational anomie differently depending on whether the firm is publicly-traded or privately-held. Theoretical and practical implications of our findings are discussed.

scholarly journals Evaluating the impacts of environmental factors on soil moisture temporal dynamics at different time scales

2020 ◽  
Author(s):  
Qi Chai ◽  
Tiejun Wang ◽  
Chongli Di
Keyword(s):  
Soil Moisture ◽  
Environmental Factors ◽  
Time Scales ◽  
Temporal Dynamics ◽  
Soil Moisture Dynamics ◽  
Temporal Variance ◽  
The Impact ◽  
Moisture Dynamics ◽  
Different Time Scales

Abstract Soil moisture displays complex spatiotemporal patterns across scales, making it important to disentangle the impacts of environmental factors on soil moisture temporal dynamics at different time scales. This study evaluated the factors affecting soil moisture dynamics at different time scales using long-term soil moisture data obtained from Nebraska and Utah. The empirical mode decomposition method was employed to decompose soil moisture time series into different temporal components with several intrinsic mode functions (IMFs) and one residual component. Results showed that the percent variance contribution (PVC) of IMFs to the total soil moisture temporal variance tended to increase for the IMFs with longer time periods. It indicated that the long-term soil moisture variations in study regions were mainly determined by low-temporal frequency signals related to seasonal climate and vegetation variations. Besides, the PVCs at short- and medium-temporal ranges were positively correlated with climate dryness, while negatively at longer temporal ranges. Moreover, the results suggested that the impact of climate on soil moisture dynamics at different time scales might vary across different climate zones, while soil effect was comparatively less in both regions. It provides additional insights into understanding soil moisture temporal dynamics in regions with contrasting climatic conditions.

Thermo-Fluid Modelling for Gas Turbines—Part I: Theoretical Foundation and Uncertainty Analysis

2009 ◽  
Author(s):  
Konstantinos G. Kyprianidis ◽  
Vishal Sethi ◽  
Stephen O. T. Ogaji ◽  
Pericles Pilidis ◽  
Riti Singh ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Simulation Software ◽  
System Level ◽  
Fluid Models ◽  
Performance Simulation ◽  
Turbine Performance ◽  
Aircraft System ◽  
The Impact ◽  
Made In

In this two-part publication, various aspects of thermo-fluid modelling for gas turbines are described and their impact on performance calculations and emissions predictions at aircraft system level is assessed. Accurate and reliable fluid modelling is essential for any gas turbine performance simulation software as it provides a robust foundation for building advanced multi-disciplinary modelling capabilities. Caloric properties for generic and semi-generic gas turbine performance simulation codes can be calculated at various levels of fidelity; selection of the fidelity level is dependent upon the objectives of the simulation and execution time constraints. However, rigorous fluid modelling may not necessarily improve performance simulation accuracy unless all modelling assumptions and sources of uncertainty are aligned to the same level. Certain modelling aspects such as the introduction of chemical kinetics, and dissociation effects, may reduce computational speed and this is of significant importance for radical space exploration and novel propulsion cycle assessment. This paper describes and compares fluid models, based on different levels of fidelity, which have been developed for an industry standard gas turbine performance simulation code and an environmental assessment tool for novel propulsion cycles. The latter comprises the following modules: engine performance, aircraft performance, emissions prediction, and environmental impact. The work presented aims to fill the current literature gap by: (i) investigating the common assumptions made in thermo-fluid modelling for gas turbines and their effect on caloric properties and (ii) assessing the impact of uncertainties on performance calculations and emissions predictions at aircraft system level. In Part I of this two-part publication, a comprehensive analysis of thermo-fluid modelling for gas turbines is presented and the fluid models developed are discussed in detail. Common technical models, used for calculating caloric properties, are compared while typical assumptions made in fluid modelling, and the uncertainties induced, are examined. Several analyses, which demonstrate the effects of composition, temperature and pressure on caloric properties of working mediums for gas turbines, are presented. The working mediums examined include dry air and combustion products for various fuels and H/C ratios. The errors induced by ignoring dissociation effects are also discussed.

Erosion and its Effect on a Water-Cooled Turbine

1978 ◽  
Author(s):  
Max Freedman
Keyword(s):  
Impact Velocity ◽  
Gas Turbines ◽  
Mass Loss Rate ◽  
Impact Angle ◽  
Aluminum Specimen ◽  
High Impact Velocity ◽  
Short Time ◽  
Impact Angles ◽  
The Impact

Erosion tests were run to obtain data for designing a water-cooled gas turbine collection shroud. All tests utilized a coherent stream of water ejected from a static nozzle against stationary small block specimens. Twenty-one tests were run with aluminum specimens and 16 more tests with other materials. The impact velocity was varied from 165 to 270 m/s (540 to 890 fps). The impact angle was varied from 10 to 90 deg. The mass loss rate results generally show four erosion regions, which are consistent with the literature. A correlation between regions two and four was found. Aluminum specimen erosion rate was found to be unexpectedly high with impact angles of 10 deg and moderate-to-high impact velocity. No report of previous liquid erosion work at impact angles less than 30 deg was found; since it is expected that water-cooled gas turbines will operate at impact angles of about 15 deg, erosion in this low impact angle region should be studied. If the correlation between erosion regions two and four can be quantized, then very short-time tests could be used to predict long-term erosion at minimal cost.

Uncertainty Reduction in Gas Turbine Performance Diagnostics by Accounting for Humidity Effects

2001 ◽  
Author(s):  
K. Mathioudakis ◽  
A. Tsalavoutas
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Ambient Conditions ◽  
Ambient Temperatures ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
Industrial Gas Turbine ◽  
The Impact ◽  
Performance Diagnostics ◽  
Health Parameters

The paper presents an analysis of the effect of ambient humidity on the performance of industrial gas turbines and examines the impact of humidity on methods used for engine condition assessment and fault diagnostics. First, the way of incorporating the effect of humidity into a computer model of gas turbine performance is described. The model is then used to derive parameters indicative of the “health” of a gas turbine and thus diagnose the presence of deterioration or faults. The impact of humidity magnitude on the values of these health parameters is studied and the uncertainty introduced, if humidity is not taken into account, is assessed. It is shown that the magnitude of the effect of humidity depends on ambient conditions and is more severe for higher ambient temperatures. Data from an industrial gas turbine are presented to demonstrate these effects and to show that if humidity is appropriately taken into account, the uncertainty in the estimation of health parameters is reduced

Sign in / Sign up

Export Citation Format

Share Document