scholarly journals Mesenchymal stem cell spheroids: potential cell materials for cell therapy

STEMedicine ◽  
2020 ◽  
Vol 2 (5) ◽  
pp. e67
Author(s):  
Zhongjuan Xu ◽  
Xingzhi Liu ◽  
Yu Wei ◽  
Zhe Zhao ◽  
Junjun Cao ◽  
...  
Keyword(s):  
Regenerative Medicine ◽  
Tissue Injury ◽  
Three Dimensional ◽  
3D Culture ◽  
Research Field ◽  
Three Dimensions ◽  
Spheroid Formation ◽  
Culture Methods ◽  
Differentiation Potential

Mesenchymal stromal/stem cells (MSCs) have been applied in clinical trials with an increasing number in recent years. MSCs showed their great potentials in regenerative medicine for their extensive sources, multilineage differentiation potential, low immunogenicity and self-renewal ability. However, the clinical application of MSCs still confronts many challenges including the requirement of large quantity of cells, low survival ability in vivo and the loss of main original characteristics due to two-dimensional (2D) culture although it is beneficial to cells fast expansion. Three-dimensional (3D) culture artificially creates an environment that permits cells to grow or interact with their surroundings in all three dimensions. Therefore, 3D culture was widely regarded as a more preferable and closer physiological microenvironment for cells growth. Recently, many different 3D spheroid culture methods have been developed to optimize MSCs biological characteristics to meet the demand of regenerative medicine. In this review, we comprehensively discussed the merits and demerits of different spheroid formation methods, expounded the mechanisms of spheroid formation and its microenvironment, and illustrated their optimized biological functions and the pre-clinical applications in various tissue injury and regeneration. In the end, we prospected the trends of this research field and proposed the key problems needed to be solved in the future.

scholarly journals Characterization of cornea-specific bioink: high transparency, improved in vivo safety

2019 ◽  
Vol 10 ◽  
pp. 204173141882338 ◽  
Author(s):  
Hyeonji Kim ◽  
Moon-Nyeo Park ◽  
Jisoo Kim ◽  
Jinah Jang ◽  
Hong-Kyun Kim ◽  
...  
Keyword(s):  
Corneal Transplantation ◽  
Three Dimensional ◽  
3D Culture ◽  
Differentiation Potential ◽  
Encapsulated Cells ◽  
Tissue Integration ◽  
Decellularized Extracellular Matrix ◽  
Artificial Corneas ◽  
Corneal Regeneration

Corneal transplantation is a typical surgical procedure for severe corneal diseases. However, the waiting time for a donor cornea has gradually increased due to a decrease in supply caused by an aging population and increased cases of laser-based surgeries. Artificial corneas were developed to meet the increase in demand; however, these approaches have suffered from material deterioration resulted by the limited tissue integration. Here, we introduce a cornea-derived decellularized extracellular matrix (Co-dECM) as a bioink for corneal regeneration. The developed Co-dECM bioink had similar quantitative measurement results for collagen and GAGs compared with that of the native cornea and also had the proper transparency for vision. The differentiation potential of human turbinate-derived mesenchymal stem cells (hTMSCs) to a keratocyte lineage was only observed in the Co-dECM group. Moreover, the developed bioink did not have any cytotoxic effect on encapsulated cells for three-dimensional (3D) culture and has great biocompatibility evident by the xeno-implantation of the Co-dECM gel into mice and rabbits for two and one month, respectively. An in vivo safety similar to clinical-grade collagen was seen with the Co-dECM, which helped to maintain the keratocyte-specific characteristics in vivo, compared with collagen. Taken together, the Co-dECM bioink has the potential to be used in various types of corneal diseases based on its corneal-specific ability and design flexibility through 3D cell printing technology.

scholarly journals Neurosphere Based Differentiation of Human iPSC Improves Astrocyte Differentiation

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Shuling Zhou ◽  
Karolina Szczesna ◽  
Anna Ochalek ◽  
Julianna Kobolák ◽  
Eszter Varga ◽  
...  
Keyword(s):  
Neural Progenitor Cells ◽  
Three Dimensional ◽  
3D Culture ◽  
Neural Progenitor Cell ◽  
Neural Progenitor ◽  
Culture Methods ◽  
Differentiation Potential ◽  
Differentiated Cells ◽  
Astrocyte Differentiation ◽  
Induced Pluripotent

Neural progenitor cells (NPCs) derived from human induced pluripotent stem cells (iPSCs) are traditionally maintained and proliferated utilizing two-dimensional (2D) adherent monolayer culture systems. However, NPCs cultured using this system hardly reflect the intrinsic spatial development of brain tissue. In this study, we determined that culturing iPSC-derived NPCs as three-dimensional (3D) floating neurospheres resulted in increased expression of the neural progenitor cell (NPC) markers,PAX6andNESTIN. Expansion of NPCs in 3D culture methods also resulted in a more homogenous PAX6 expression when compared to 2D culture methods. Furthermore, the 3D propagation method for NPCs resulted in a significant higher expression of the astrocyte markers  GFAPandaquaporin 4(AQP4) in the differentiated cells. Thus, our 3D propagation method could constitute a useful tool to promote NPC homogeneity and also to increase the differentiation potential of iPSC towards astrocytes.

scholarly journals Serum-Free Culture System for Spontaneous Human Mesenchymal Stem Cell Spheroid Formation

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Guoyi Dong ◽  
Shengpeng Wang ◽  
Yuping Ge ◽  
Qiuting Deng ◽  
Qi Cao ◽  
...  
Keyword(s):  
Clinical Research ◽  
Expression Profiles ◽  
Three Dimensional ◽  
3D Culture ◽  
Human Mesenchymal Stem Cells ◽  
Human Mesenchymal Stem Cell ◽  
Spheroid Formation ◽  
Culture Methods ◽  
Serum Replacement ◽  
Knockout Serum Replacement

Human mesenchymal stem cells (hMSCs) are widely used in clinical research because of their multipotential, immunomodulatory, and reparative properties. Previous studies determined that hMSC spheroids from a three-dimensional (3D) culture possess higher therapeutic efficacy than conventional hMSCs from a monolayer (2D) culture. To date, various 3D culture methods have been developed to form hMSC spheroids but most of them used culture medium containing fetal bovine serum (FBS), which is not suitable for further clinical use. Here, we demonstrate that dissociated single MSCs seeded in induced pluripotent stem medium (MiPS) adhere loosely to the dish and spontaneously migrate to form spheroids during day 3 to day 6. Through component deletion screening and complementation experiments, the knockout serum replacement (KSR) was identified as necessary and sufficient for hMSC spheroid formation. Transcriptome analysis showed that the overall expression profiles were highly similar between 2D culture with FBS and KSR-derived spheroids. Interestingly, genes related to inflammatory response, immune response, and angiogenesis were upregulated in spheroids at day 6 and qPCR results further validated the increased expression level of related genes, including STC1, CCL7, HGF, IL24, and TGFB3. When spheroids were replated in normal FBS medium, cells formed a typical spindle-shaped morphology and FACS results showed that the recovered cells retained MSC-specific surface markers, such as CD73, CD90, and CD105. In summary, we developed a practical and convenient method to generate hMSC spheroids for clinical research and therapy.

scholarly journals Microfluidic-Based Droplets for Advanced Regenerative Medicine: Current Challenges and Future Trends

Biosensors ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 20
Author(s):  
Hojjatollah Nazari ◽  
Asieh Heirani-Tabasi ◽  
Sadegh Ghorbani ◽  
Hossein Eyni ◽  
Sajad Razavi Bazaz ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Regenerative Medicine ◽  
Cell Therapy ◽  
Large Scale ◽  
Three Dimensional ◽  
3D Culture ◽  
Cell Encapsulation ◽  
Cost Effective ◽  
Culture Methods

Microfluidics is a promising approach for the facile and large-scale fabrication of monodispersed droplets for various applications in biomedicine. This technology has demonstrated great potential to address the limitations of regenerative medicine. Microfluidics provides safe, accurate, reliable, and cost-effective methods for encapsulating different stem cells, gametes, biomaterials, biomolecules, reagents, genes, and nanoparticles inside picoliter-sized droplets or droplet-derived microgels for different applications. Moreover, microenvironments made using such droplets can mimic niches of stem cells for cell therapy purposes, simulate native extracellular matrix (ECM) for tissue engineering applications, and remove challenges in cell encapsulation and three-dimensional (3D) culture methods. The fabrication of droplets using microfluidics also provides controllable microenvironments for manipulating gametes, fertilization, and embryo cultures for reproductive medicine. This review focuses on the relevant studies, and the latest progress in applying droplets in stem cell therapy, tissue engineering, reproductive biology, and gene therapy are separately evaluated. In the end, we discuss the challenges ahead in the field of microfluidics-based droplets for advanced regenerative medicine.

scholarly journals Comparison of Pluripotency, Differentiation, and Mitochondrial Metabolism Capacity in Three-Dimensional Spheroid Formation of Dental Pulp-Derived Mesenchymal Stem Cells

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Young-Bum Son ◽  
Dinesh Bharti ◽  
Saet-Byul Kim ◽  
Chan-Hee Jo ◽  
Eun-Yeong Bok ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Dental Pulp ◽  
Time Course ◽  
Three Dimensional ◽  
3D Culture ◽  
Mitochondrial Metabolism ◽  
Osteogenic Potential ◽  
Spheroid Formation ◽  
Differentiation Potential

Mesenchymal stem cells (MSCs) are valuable candidates in tissue engineering and stem cell-based therapy. Traditionally, MSCs derived from various tissues have been successfully expanded in vitro using adherent culture plates commonly called as monolayer two-dimensional (2D) cultures. Recently, many studies demonstrated that stemness and multilineage differentiation potential could be enhanced to greater extent when MSCs are cultured as suspended aggregates by means of three-dimensional (3D) culturing techniques. However, there are limited reports on changed mitochondrial metabolism on 3D spheroid formation of MSCs. Therefore, the present study was aimed at investigating the stemness, differentiation potential, and mitochondrial metabolism capacity of 3D dental pulp-derived MSC (DPSC) spheroids in comparison to monolayer cultured DPSCs. We isolated dental pulp-derived MSCs (DPSCs) and successfully developed a 3D culture system which facilitated the formation of MSC spheroids. The cell aggregation was observed after 2 hours, and spheroids were formed after 24 hours and remained in shape for 72 hours. After spheroid formation, the levels of pluripotent markers increased along with enhancement in adipogenic and osteogenic potential compared to 2D cultured control cells. However, decreased proliferative capacity, cell cycle arrest, and elevated apoptosis rate were observed with the time course of the 3D culture except for the initial 24-hour aggregation. Furthermore, oxygen consumption rates of living cells decreased with the time course of the aggregation except for the initial 24 hours. Overall, our study indicated that the short-term 3D culture of MSCs could be a suitable alternative to culture the cells.

scholarly journals Reversal of senescence-associated beta-galactosidase expression during in vitro three-dimensional tissue-engineering of human chondrocytes in a polymer scaffold

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shojiro Katoh ◽  
Atsuki Fujimaru ◽  
Masaru Iwasaki ◽  
Hiroshi Yoshioka ◽  
Rajappa Senthilkumar ◽  
...  
Keyword(s):  
Regenerative Medicine ◽  
Replicative Senescence ◽  
Cultured Cells ◽  
Three Dimensional ◽  
Human Chondrocytes ◽  
Cartilage Tissue ◽  
Optimal Method ◽  
Beta Galactosidase

AbstractRegenerative medicine applications require cells that are not inflicted with senescence after in vitro culture for an optimal in vivo outcome. Methods to overcome replicative senescence include genomic modifications which have their own disadvantages. We have evaluated a three-dimensional (3D) thermo-reversible gelation polymer (TGP) matrix environment for its capabilities to reverse cellular senescence. The expression of senescence-associated beta-galactosidase (SA-βgal) by human chondrocytes from osteoarthritis-affected cartilage tissue, grown in a conventional two-dimensional (2D) monolayer culture versus in 3D-TGP were compared. In 2D, the cells de-differentiated into fibroblasts, expressed higher SA-βgal and started degenerating at 25 days. SA-βgal levels decreased when the chondrocytes were transferred from the 2D to the 3D-TGP culture, with cells exhibiting a tissue-like growth until 42–45 days. Other senescence associated markers such as p16INK4a and p21 were also expressed only in 2D cultured cells but not in 3D-TGP tissue engineered cartilage. This is a first-of-its-kind report of a chemically synthesized and reproducible in vitro environment yielding an advantageous reversal of aging of human chondrocytes without any genomic modifications. The method is worth consideration as an optimal method for growing cells for regenerative medicine applications.

scholarly journals Human Adipose-Derived Stromal/Stem Cell Culture and Analysis Methods for Adipose Tissue Modeling In Vitro: A Systematic Review

Cells ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1378
Author(s):  
Peyton Gibler ◽  
Jeffrey Gimble ◽  
Katie Hamel ◽  
Emma Rogers ◽  
Michael Henderson ◽  
...  
Keyword(s):  
Systematic Review ◽  
Adipose Tissue ◽  
Drug Discovery ◽  
3D Culture ◽  
Human Adipose Tissue ◽  
Culture Methods ◽  
Adipose Tissue Engineering ◽  
The Impact

Human adipose-derived stromal/stem cells (hASC) are widely used for in vitro modeling of physiologically relevant human adipose tissue. These models are useful for the development of tissue constructs for soft tissue regeneration and 3-dimensional (3D) microphysiological systems (MPS) for drug discovery. In this systematic review, we report on the current state of hASC culture and assessment methods for adipose tissue engineering using 3D MPS. Our search efforts resulted in the identification of 184 independent records, of which 27 were determined to be most relevant to the goals of the present review. Our results demonstrate a lack of consensus on methods for hASC culture and assessment for the production of physiologically relevant in vitro models of human adipose tissue. Few studies have assessed the impact of different 3D culture conditions on hASC adipogenesis. Additionally, there has been a limited use of assays for characterizing the functionality of adipose tissue in vitro. Results from this study suggest the need for more standardized culture methods and further analysis on in vitro tissue functionality. These will be necessary to validate the utility of 3D MPS as an in vitro model to reduce, refine, and replace in vivo experiments in the drug discovery regulatory process.

scholarly journals Using Spheroids as Building Blocks Towards 3D Bioprinting of Tumor Microenvironment

2021 ◽  
Vol 7 (4) ◽  
pp. 444
Author(s):  
Pei Zhuang ◽  
Yi-Hua Chiang ◽  
Maria Serafim Fernanda ◽  
Mei He
Keyword(s):  
Tumor Microenvironment ◽  
Prediction Models ◽  
Three Dimensional ◽  
3D Culture ◽  
Building Blocks ◽  
3D Bioprinting ◽  
Multicellular Spheroids ◽  
Tumor Models ◽  
3D Printed

Cancer still ranks as a leading cause of mortality worldwide. Although considerable efforts have been dedicated to anticancer therapeutics, progress is still slow, partially due to the absence of robust prediction models. Multicellular tumor spheroids, as a major three-dimensional (3D) culture model exhibiting features of avascular tumors, gained great popularity in pathophysiological studies and high throughput drug screening. However, limited control over cellular and structural organization is still the key challenge in achieving in vivo like tissue microenvironment. 3D bioprinting has made great strides toward tissue/organ mimicry, due to its outstanding spatial control through combining both cells and materials, scalability, and reproducibility. Prospectively, harnessing the power from both 3D bioprinting and multicellular spheroids would likely generate more faithful tumor models and advance our understanding on the mechanism of tumor progression. In this review, the emerging concept on using spheroids as a building block in 3D bioprinting for tumor modeling is illustrated. We begin by describing the context of the tumor microenvironment, followed by an introduction of various methodologies for tumor spheroid formation, with their specific merits and drawbacks. Thereafter, we present an overview of existing 3D printed tumor models using spheroids as a focus. We provide a compilation of the contemporary literature sources and summarize the overall advancements in technology and possibilities of using spheroids as building blocks in 3D printed tissue modeling, with a particular emphasis on tumor models. Future outlooks about the wonderous advancements of integrated 3D spheroidal printing conclude this review.

scholarly journals The challenge of ovarian tissue culture: 2D versus 3D culture

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Ana Sofia Pais ◽  
Sandra Reis ◽  
Mafalda Laranjo ◽  
Francisco Caramelo ◽  
Fátima Silva ◽  
...  
Keyword(s):  
Tissue Culture ◽  
3D Model ◽  
Tissue Injury ◽  
Ovarian Tissue ◽  
Three Dimensional ◽  
3D Culture ◽  
Endocrine Function ◽  
Histological Score ◽  
Score Analysis ◽  
Alginate Matrix

Abstract Background Cryopreservation of ovarian tissue is a powerful technique for preserving female fertility, as it can restore fertility and endocrine function. To increase the longevity of the transplant and decrease the risk of reimplantation of neoplastic cells, several studies have been carried out with culture of ovarian tissue. The aim of this study was to compare a conventional (2D) culture with an alginate matrix three-dimensional (3D) model for ovarian tissue culture. Results The ovarian tissue culture within the alginate matrix (3D) was similar to 2D culture, regarding follicular density and cell apoptosis in follicles and stroma. The proliferation rate remained stable in both models for follicles, but for stromal cell proliferation it decreased only in 3D culture (p = 0.001). At 24 h of culture, cytotoxicity was lower in the 3D model (p = 0.006). As culture time increased, cytotoxicity seemed similar. Degradation of the tissue was suggested by the histological score analysis of tissue morphology after 72 h of culture. Tissue injury was greater (p = 0.01) in 3D culture due to higher interstitial oedema (p = 0.017) and tissue necrosis (p = 0.035). Conclusion According to our results, 3D culture of ovarian tissue has no advantage over 2Dculture; it is more time consuming and difficult to perform and has worse reproducibility.

Sign in / Sign up

Export Citation Format

Share Document