Preparation and Evaluation of a Gas Formation-based Multiple-Unit Gastro-Retentive Floating Delivery System of Dipyridamole

2012 ◽  
Vol 5 (1) ◽  
pp. 1607-1616
Author(s):  
Y. Madhusudan Rao ◽  
Katakam V V ◽  
S Reddy ◽  
J M Somagoni ◽  
P K Panakanti ◽  
...  
Keyword(s):  
Drug Release ◽  
Delivery System ◽  
Polymeric Membrane ◽  
Wet Granulation ◽  
Physical Parameters ◽  
Gastric Residence Time ◽  
Gas Formation ◽  
Multiple Unit ◽  
Model Drug

The aim of this study was to prepare mini tablets to be filled into a capsule that is designed to float on the gastric contents based on gas formation technique. The drug-containing core mini-tablets were prepared by wet granulation method followed by a coating of the core units with seal coating, an effervescent layer and a gas-entrapping polymeric membrane (Eudragit RS30D, RL30D). Dipyridamole, which is predominantly absorbed in the upper part of GI tract and unabsorbed/insoluble at the lower intestine, was used as a model drug. The effect of the preparative parameters like amount of the effervescent agent layered onto the seal coated units, type and coating level of the gas-entrapping polymeric membrane, floating ability and drug release properties of the multiple-unit FDDS were evaluated. The formulations were evaluated for pharmacopoeial quality control tests. Physical parameters were found to be within the acceptable limits. The system using Eudragit® RL30D as a gas-entrapping polymeric membrane exhibited floating properties. The time to float decreased as amount of the effervescent agent increased and coating level of gas-entrapping polymeric membrane decreased. The optimum system exhibited complete floating within 3 minutes and maintained that buoyancy over a period of 8 hours. The drug release was sustained and linear with the square root of time. Increasing the coating level of the gas-entrapping polymeric membrane decreased drug release. Both the rapid-floating and sustained-release properties were achieved in the multiple-unit floating delivery system developed in this study. The in vivo gastric residence time was examined by radiograms and it was found that the units remained in the stomach for about 6 hours. The analysis of the dissolution data after storage at 40°C and 75% RH for 6 months showed no significant change indicating good stability.

Development of Multiple-Unit Floating Drug Delivery System of Clarithromycin: Formulation, in vitro Dissolution by Modified Dissolution Apparatus, in vivo Radiographic Studies in Human Volunteers

Drug Research ◽  
2017 ◽  
Vol 67 (07) ◽  
pp. 412-418 ◽  
Author(s):  
Arun Reddy ◽  
Narendar Reddy
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
In Vitro Dissolution ◽  
Physical Parameters ◽  
Gastric Residence Time ◽  
Human Volunteers ◽  
Multiple Unit

AbstractClarithromycin (CM), a broad spectrum macrolide antibiotic used to eradicate H. pylori in peptic ulcer. Clarithromycin (CM) is well absorbed from the gastrointestinal tract, but has a bioavailability of 50% due to rapid biodegradation. The aim of this investigation was to increase the gastric residence time, and to control the drug release of clarithromycin by formulating into multiple unit floating mini-tablets. Floating tablets were prepared by using direct compression method with HPMC K4M and Polyox WSR 1105 as release retarded polymers and sodium bicarbonate as gas generating agent. The prepared mini-tablets were evaluated for thickness, weight variation, friability, hardness, drug content, in vitro buoyancy, swelling studies, in vitro dissolution studies by using modified Rossett-Rice test and in vivo radiographic studies in healthy human volunteers in fasting conditions. DSC analysis revealed that no interaction between drug and excipients. All the physical parameters of the tablets were within the acceptable limits. The optimized formulation (F6) had showed controlled drug release of 99.16±3.22% in 12 h, by zero-order release kinetics, along with floating lag time of 9.5±1.28 s and total floating time of 12±0.14 h. X-ray imaging studies revealed that in vivo gastric residence time of clarithromycin floating mini-tablet in the stomach was about 3.5 h. The results demonstrated that the developed floating mini-tablets of clarithromycin caused significant enhancement in gastric retention time along with sustained effect and increased oral bioavailability.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

Formulation and Evaluation of Ferrous Ascorbate Floating Tablets for the Treatment of Anaemia

2019 ◽  
Vol 9 (4) ◽  
pp. 299-307
Author(s):  
Kuldeep Singh ◽  
Subheet K. Jain ◽  
Karan Razdan ◽  
Harmanpreet Singh ◽  
Nikhil S. Sahajpal ◽  
...  
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
In Vivo Studies ◽  
Wet Granulation ◽  
Floating Tablets ◽  
Gastric Residence Time ◽  
Ferrous Ascorbate

Background and Objective: Ferrous ascorbate (FA) is preferentially absorbed from the upper gastrointestinal (GI) track, and has low bioavailability due to less residence time of FA in upper GI track. In addition, FA has low solubility and stability at higher pH. The aim of this study was to prepare gastro-retentive tablets of FA in order to increase its gastric residence time and hence, bioavailability. Methods: Floating tablets of FA were prepared by wet granulation method using different retarding polymers, Povidone K30 as binder and sodium bicarbonate as effervescent agent. The prepared floating tablets were compared with immediate release (IR) tablets and characterized in detail for in vitro and in vivo studies. Results: In-vitro drug release study of the optimized batch showed 96% drug release in 12 h in 0.1 N HCl. The mechanism of drug release from the floating tablets was non-fickian and release kinetics was best fit in peppas model. The gastric retention time of optimized was found to be significantly increased (6 h) in comparison with IR tablet (<1h). Further, bioavailability was also found significantly increased (>70%) in comparison with IR tablet (15-30%). X-ray studies carried on healthy rabbits suggested that the optimized batch remained buoyant in gastric contents up to 6 h and pharmacokinetic study showed sustained released behaviour of optimized batch in comparison to conventional IR tablet. Conclusion: Floating tablet of FA improved the bioavailability of iron by increasing its gastric residence time, hence it could be a better approach for treating iron deficiency and help in improving the patient compliance than IR tablets.

Development and Evaluation of Floating Pulsatile Drug Delivery System Using Meloxicam

2017 ◽  
Vol 7 (04) ◽  
Author(s):  
ShirishaG. Suddala ◽  
S. K. Sahoo ◽  
M. R. Yamsani
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Oral Dosage ◽  
Lag Phase ◽  
Pulsatile Drug Delivery

Objective: The objective of this research work was to develop and evaluate the floating– pulsatile drug delivery system (FPDDS) of meloxicam intended for Chrono pharmacotherapy of rheumatoid arthritis. Methods: The system consisting of drug containing core, coated with hydrophilic erodible polymer, which is responsible for a lag phase for pulsatile release, top cover buoyant layer was prepared with HPMC K4M and sodium bicarbonate, provides buoyancy to increase retention of the oral dosage form in the stomach. Meloxicam is a COX-2 inhibitor used to treat joint diseases such as osteoarthritis and rheumatoid arthritis. For rheumatoid arthritis Chrono pharmacotherapy has been recommended to ensure that the highest blood levels of the drug coincide with peak pain and stiffness. Result and discussion: The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. Hence, the main objective of present work is to formulate FPDDS of meloxicam in order to achieve drug release after pre-determined lag phase. Developed formulations were evaluated for in vitro drug release studies, water uptake and erosion studies, floating behaviour and in vivo radiology studies. Results showed that a certain lag time before drug release which was due to the erosion of the hydrophilic erodible polymer. The lag time clearly depends on the type and amount of hydrophilic polymer which was applied on the inner cores. Floating time and floating lag time was controlled by quantity and composition of buoyant layer. In vivo radiology studies point out the capability of the system of longer residence time of the tablets in the gastric region and releasing the drug after a programmed lag time. Conclusion: The optimized formulation of the developed system provided a lag phase while showing the gastroretension followed by pulsatile drug release that would be beneficial for chronotherapy of rheumatoid arthritis and osteoarthritis.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

In Vitro and In Vivo Drug Release from a Novel In Situ Forming Drug Delivery System

2007 ◽  
Vol 25 (6) ◽  
pp. 1347-1354 ◽  
Author(s):  
Heiko Kranz ◽  
Erol Yilmaz ◽  
Gayle A. Brazeau ◽  
Roland Bodmeier
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Situ Forming

scholarly journals Novel concept of the smart NIR-light–controlled drug release of black phosphorus nanostructure for cancer therapy

2018 ◽  
Vol 115 (3) ◽  
pp. 501-506 ◽  
Author(s):  
Meng Qiu ◽  
Dou Wang ◽  
Weiyuan Liang ◽  
Liping Liu ◽  
Yin Zhang ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Cancer Therapy ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Near Infrared ◽  
Black Phosphorus ◽  
Deep Penetration ◽  
Nir Light

A biodegradable drug delivery system (DDS) is one the most promising therapeutic strategies for cancer therapy. Here, we propose a unique concept of light activation of black phosphorus (BP) at hydrogel nanostructures for cancer therapy. A photosensitizer converts light into heat that softens and melts drug-loaded hydrogel-based nanostructures. Drug release rates can be accurately controlled by light intensity, exposure duration, BP concentration, and hydrogel composition. Owing to sufficiently deep penetration of near-infrared (NIR) light through tissues, our BP-based system shows high therapeutic efficacy for treatment of s.c. cancers. Importantly, our drug delivery system is completely harmless and degradable in vivo. Together, our work proposes a unique concept for precision cancer therapy by external light excitation to release cancer drugs. If these findings are successfully translated into the clinic, millions of patients with cancer will benefit from our work.

A Smart Drug Delivery System Based on Thermo-Responsive Polymer Gated Au NRs@SiO2 Nano-Platform

2021 ◽  
Vol 16 (7) ◽  
pp. 1029-1036
Author(s):  
Hongzhu Wang ◽  
Mengxun Chen ◽  
Liping Song ◽  
Youju Huang
Keyword(s):  
Drug Delivery ◽  
Block Copolymer ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Photothermal Therapy ◽  
Drug Loading ◽  
Temperature Sensitive

A key challenge for nanoparticles-based drug delivery system is to achieve manageable drug release in tumour cell. In this study, a versatile system combining photothermal therapy and controllable drug release for tumour cells using temperature-sensitive block copolymer coupled Au NRs@SiO2 is reported. While the Au NRs serve as hyperthermal agent and the mesoporous silica was used to improve the drug loading and decrease biotoxicity. The block copolymer acted as “gatekeeper” to regulate the release of model drug (Doxorubicin hydrochloride, DOX). Through in vivo and in vitro experiments, we achieved the truly controllable drug release and photothermal therapy with the collaborative effect of the three constituents of the nanocomposites. The reported nanocomposites pave the way to high-performance controllable drug release and photothermal therapy system.

Floating Microsphere of Curcumin as Targeted Gastro-retentive Drug Delivery System

2021 ◽  
pp. 5202-5206
Author(s):  
Anupam K Sachan ◽  
Saurabh Singh ◽  
Kiran Kumari ◽  
Pratibha Devi
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Entrapment Efficiency ◽  
Synthetic Polymers ◽  
Drug Bioavailability ◽  
Gastric Residence Time

Microspheres carrier system made from natural or synthetic polymers used in sustained release drug delivery system. The present study involves formulation and evaluation of floating microspheres of Curcumin for improving the drug bioavailability by prolongation gastric residence time. Curcumin, natural hypoglycemic agent is a lipophilic drug, absorbed poorly from the stomach, quickly eliminated and having short half-life so suitable to formulate floating drug delivery system for sustained release. Floating microspheres of curcumin were formulated by solvent evaporation technique using ethanol and dichloromethane (1:1) as organic solvent and incorporating various synthetic polymers as coating polymer, sustain release polymers and floating agent. The final formulation were evaluated various parameters such as compatibility studies, micrometric properties, In-vitro drug release and % buoyancy. FTIR studies showed that there were no interaction between drug and excipients. The surface morphology studies by SEM confirmed their spherical and smooth surface. The mean particles size were found to be 416-618µm, practical yield of microspheres was in the range of 60.21±0.052% - 80.87±0.043%, drug entrapment efficiency 47.4±0.065% - 77.9±0.036% and % buoyancy 62,24±0.161% - 88.63±0.413%. Result show that entraptmency increased as polymer (Eudragit RS100) conc. Increased. The drug release after 12 hrs. was 72.13% - 87.13% and it decrease as a polymer (HPMC, EC) concentration was decrease.

STUDY OF THE DIFFERENT RELEASE CHARACTERISTICS OF ANTIBIOTICS FROM PATIENTS: A DYNAMIC ELUTING SYSTEM TO INVESTIGATE DRUG RELEASE FROM ANTIBIOTIC-IMPREGNATED CALCIUM SULFATE DELIVERY

2015 ◽  
Vol 15 (01) ◽  
pp. 1550012
Author(s):  
YANG ZHANG ◽  
RENJIE WU ◽  
YING HU ◽  
YU DONG ◽  
LIFENG SHEN ◽  
...  
Keyword(s):  
Drug Release ◽  
Delivery System ◽  
Release Rate ◽  
Calcium Sulfate ◽  
Fickian Diffusion ◽  
Release Behavior ◽  
Cumulative Release ◽  
In Vivo Release

Background: Antibiotic-impregnated calcium sulfate delivery systems (ACDS) are commonly used to treat chronic osteomyelitis. Our research is to investigate drug release in vitro over a longer period, as a cautious predictor of in vivo release. Methods: The local release behavior of antibiotic in vitro was simulated. The consecutive dynamic eluting experiment was performed based on the pro-operative characteristic of osteomyelitis patients and the determined results of drug concentration in the human drainage tissue fluid (DTF). The concentration of each drug in the receiving solution was detected by ultra-performance liquid chromatography-tandem quadrupole detector mass spectrometry. The ACDS was reviewed by scanning electronic microscopy (SEM) after 48 h, and prepared to be eluted for another examination after 33 days. The mechanism of antibiotic release was analyzed by using the Ritger–Peppas and Weibull equations. Results: The cumulative release rate of vancomycin in a vancomycin-calcium sulfate delivery system (VCDS) was 77.50 % (3.0 mm diameter) and 72.43 % (4.8 mm diameter), while that of the tobramycin in a tobramycin-calcium sulfate delivery system (TCDS) was 88.0 % (3.0 mm diameter) and 84.55 % (4.8 mm diameter). At the 15th day, approximately 27.92% of vancomycin was and 29.35% of tobramycin was released from the local implant in vivo. Using SEM, numerous vancomycin and tobramycin particles were found to be attached to the columnar calcium sulfate crystals at the start of the experiment. The release behavior of the two antibiotics followed a combination of Fickian diffusion and Case II transport mechanisms within the first 48 h, and a Fickian diffusion mechanism during the subsequent time period. The correlation coefficient of tobramycin and vancomycin in vivo and in vitro was 0.9704–0.9949 and 0.9549–0.9782, respectively. Conclusion: A good correlation of the in vivo and in vitro cumulative release rates was observed by comparing the cumulative release rate of drugs in vitro by means of the dynamic eluting model, and in the DTF. Therefore, our study has proved that it is possible to use the dynamic eluting model as a cautious predictor of in vivo release.

Sign in / Sign up

Export Citation Format

Share Document