A NUMERICAL STUDY OF A HOMOGENEOUS BEAM WITH A TIP MASS

2021 ◽  
Vol 10 (6) ◽  
pp. 2731-2753
Author(s):  
Y.S.A. Joresse ◽  
B.G. Jean-Marc ◽  
Y. Gozo ◽  
T.K. Augustin
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Weak Solution ◽  
Existence And Uniqueness ◽  
Numerical Study ◽  
The Other ◽  
Flexible Beam ◽  
Shape Functions ◽  
Galerkin Approximations ◽  
Tip Mass

In this paper, we prove the existence and uniqueness of the weak solution of a flexible beam that is clamped at one end and free at the other; a mass is also attached to the free end of the beam. Also, we construct a finite element method, based on piecewise cubic Hermitian shape functions. Next, we derive error estimates for the semi-discrete Galerkin approximations. The results are derived from \cite{BS}. Finally, we implement the results of numerical schemes developed.

scholarly journals Higher Order Multiscale Finite Element Method for Heat Transfer Modeling

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3827
Author(s):  
Marek Klimczak ◽  
Witold Cecot
Keyword(s):  
Heat Transfer ◽  
Finite Element Method ◽  
Finite Element ◽  
Degrees Of Freedom ◽  
Higher Order ◽  
Shape Functions ◽  
Multiscale Finite Element Method ◽  
Multiscale Finite Element ◽  
Steady State Heat ◽  
Steady State Heat Transfer

In this paper, we present a new approach to model the steady-state heat transfer in heterogeneous materials. The multiscale finite element method (MsFEM) is improved and used to solve this problem. MsFEM is a fast and flexible method for upscaling. Its numerical efficiency is based on the natural parallelization of the main computations and their further simplifications due to the numerical nature of the problem. The approach does not require the distinct separation of scales, which makes its applicability to the numerical modeling of the composites very broad. Our novelty relies on modifications to the standard higher-order shape functions, which are then applied to the steady-state heat transfer problem. To the best of our knowledge, MsFEM (based on the special shape function assessment) has not been previously used for an approximation order higher than p = 2, with the hierarchical shape functions applied and non-periodic domains, in this problem. Some numerical results are presented and compared with the standard direct finite-element solutions. The first test shows the performance of higher-order MsFEM for the asphalt concrete sample which is subject to heating. The second test is the challenging problem of metal foam analysis. The thermal conductivity of air and aluminum differ by several orders of magnitude, which is typically very difficult for the upscaling methods. A very good agreement between our upscaled and reference results was observed, together with a significant reduction in the number of degrees of freedom. The error analysis and the p-convergence of the method are also presented. The latter is studied in terms of both the number of degrees of freedom and the computational time.

scholarly journals Numerical study of Fisher's equation by a Petrov-Galerkin finite element method

1991 ◽  
Vol 33 (1) ◽  
pp. 27-38 ◽  
Author(s):  
S. Tang ◽  
R. O. Weber
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Study ◽  
Galerkin Finite Element Method ◽  
Linear Diffusion ◽  
Galerkin Finite Element ◽  
Fisher’S Equation ◽  
Nonlinear Reaction ◽  
Fisher's Equation ◽  
Element Method

AbstractFisher's equation, which describes a balance between linear diffusion and nonlinear reaction or multiplication, is studied numerically by a Petrov-Galerkin finite element method. The results show that any local initial disturbance can propagate with a constant limiting speed when time becomes sufficiently large. Both the limiting wave fronts and the limiting speed are determined by the system itself and are independent of the initial values. Comparing with other studies, the numerical scheme used in this paper is satisfactory with regard to its accuracy and stability. It has the advantage of being much more concise.

Implementation of p and h-p Versions of the Finite Element Method

1992 ◽  
Author(s):  
Ye-Chen Lai ◽  
Timothy C. S. Liang ◽  
Zhenxue Jia
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Elastic Analysis ◽  
Two Dimensional ◽  
The Finite Element Method ◽  
Shape Functions ◽  
Linear Elastic ◽  
Finite Element Software ◽  
Analysis Process ◽  
Adaptive Analysis

Abstract Based on hierarchic shape functions and an effective convergence procedure, the p-version and h-p adaptive analysis capabilities were incorporated into a finite element software system, called COSMOS/M. The range of the polynomial orders can be varied from 1 to 10 for two dimensional linear elastic analysis. In the h-p adaptive analysis process, a refined mesh are first achieved via adaptive h-refinement. The p-refinement is then added on to the h-version designed mesh by uniformly increasing the degree of the polynomials. Some numerical results computed by COSMOS/M are presented to illustrate the performance of these p and h-p analysis capabilities.

A Numerical Approach for Simulation of Rock Fracturing in Engineering Blasting

2012 ◽  
pp. 203-224
Author(s):  
Mani Ram Saharan ◽  
Hani Mitri
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Modelling ◽  
Knowledge Base ◽  
Plane Stress ◽  
Numerical Approach ◽  
The Other ◽  
Brittle Rock ◽  
Rock Fracturing ◽  
Element Elimination

An approach for simulation of rock fracturing as a result of engineering blasting is presented in this paper. The approach uses element elimination technique within the framework of finite element method to capture the physics of engineering blasting. The approach does not require pre-placement of fracture paths which is the severe drawback of the other existing methodologies and approaches. Results of plane stress modelling for isotropic brittle rock behaviour are presented in this paper and these results are in good agreement with the existing knowledge base. The authors also review the existing approaches of numerical modelling to compare the efficacy of the element elimination technique. It is anticipated that the further developments with this approach can prove to be good experimental tool to improve engineering blasting operations.

scholarly journals Influence of the Mechanical Properties of Elastoplastic Materials on the Nanoindentation Loading Response

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4842
Author(s):  
Huanping Yang ◽  
Wei Zhuang ◽  
Wenbin Yan ◽  
Yaomian Wang
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
The Other ◽  
Equivalent Model ◽  
Strain Hardening Exponent ◽  
Mechanical Parameters ◽  
The Finite Element Method ◽  
Fem Simulations ◽  
Elastoplastic Materials

The nanoindentation loading response of elastoplastic materials was simulated by the finite element method (FEM). The influence of the Young’s modulus E, yield stress σy, strain hardening exponent n and Poisson’s ratio ν on the loading response was investigated. Based on an equivalent model, an equation with physical meaning was proposed to quantitatively describe the influence. The calculations agree well with the FEM simulations and experimental results in literature. Comparisons with the predictions using equations in the literature also show the reliability of the proposed equation. The investigations show that the loading curvature C increases with increasing E, σy, n and ν. The increase rates of C with E, σy, n and ν are different for their different influences on the flow stress after yielding. It is also found that the influence of one of the four mechanical parameters on C can be affected by the other mechanical parameters.

Sign in / Sign up

Export Citation Format

Share Document