scholarly journals Microfluidic manufacturing of different niosomes nanoparticles for curcumin encapsulation: Physical characteristics, encapsulation efficacy, and drug release

2019 ◽  
Vol 10 ◽  
pp. 1826-1832 ◽  
Author(s):  
Mohammad A Obeid ◽  
Ibrahim Khadra ◽  
Abdullah Albaloushi ◽  
Margaret Mullin ◽  
Hanin Alyamani ◽  
...  

Curcumin, a natural chemical compound found in Curcuma longa that has been used in antitumor and anti-inflammation applications, exhibits very limited water solubility and rapid in vivo degradation, which limits its clinical application. To overcome these limitations, niosome nanoparticles were prepared by microfluidic mixing for curcumin encapsulation. Niosome nanoparticles are lipid-based, and composed of non-ionic surfactants with cholesterol orientated into a membrane bilayer structure. Two different non-ionic surfactants were used and the mixing parameters were varied to optimize the characteristics of the prepared niosomes. The prepared niosomes had an average particle size of 70–230 nm depending on the type of non-ionic surfactant used and the mixing parameter. Moreover, all prepared niosomes were monodisperse with an average polydispersity index ranging from 0.07 to 0.3. All prepared niosomes were spherical as demonstrated by transmission electron microscopy. Curcumin was encapsulated with a maximum encapsulation efficiency of around 60% using Tween 85 as the non-ionic surfactant. Niosomes prepared by microfluidic mixing provided a controlled release of curcumin, as indicated by the release profile of curcumin, improving its therapeutic capability. These results demonstrate that niosomes prepared by microfluidic mixing to encapsulate curcumin are a promising delivery system to reach target cells.

2019 ◽  
Vol 31 (1) ◽  
pp. 225
Author(s):  
N. Gupta ◽  
K. Polkoff ◽  
L. Qiao ◽  
K. Cheng ◽  
J. Piedrahita

CRISPR/Cas systems present a powerful gene-editing tool with the potential for widespread therapeutic use; however, current methods of in vivo delivery such as adeno-associated viruses (AAV) may stimulate an immune response, creating the need for an alternative for delivery of CRISPR/Cas9. Exosomes are small vesicles that are released by cells and serve as a delivery system for RNA, proteins, and various molecules to other cells. The focus of this project was to use exosomes as a delivery system for Cas9, exploiting their high uptake by target cells and their ability to avoid the immune system in vivo. Porcine fetal fibroblasts (PFF) were grown to 80% confluency; after 48h, exosomes were isolated and concentrated from conditioned media by filtration with a 0.22-μm filter followed by 100-kDa molecular weight cutoff filter. Transmission electron microscopy, Western blotting for presence of CD81, and an uptake assay for exosomes stained with the lipophilic dye DiI (Invitrogen/Thermo Fisher Scientific, Waltham, MA, USA) were used to characterise isolated exosomes, and average particle size was evaluated by NanoSight (Salisbury, United Kingdom). After characterisation, exosomes were loaded with Cas9 (PNA Bio, Newbury Park, CA, USA) using sonication, incubation with saponin, or extrusion. For each method of loading, 1.0×1011 exosomes and 500ng of Cas9 were used. For sonication, exosomes and Cas9 were sonicated 4 times: 4s on/2s off, left on ice for 2min, and then repeated for 4 more cycles. Loaded exosomes were then incubated at 37°C for 20min. For incubation with saponin, 100μL of 0.6% saponin solution was made in PBS, mixed with exosomes and Cas9, and then incubated on a shaker at 800 rpm for 20min. For extrusion, exosomes and Cas9 were extruded (Avanti Polar Lipids, Alabaster, AL, USA) 10, 15, or 20 times through a 0.22-μm filter. To evaluate efficiency of Cas9 loading into exosomes, loaded exosome samples were split in half, with one-half receiving a proteinase K digest (100μg mL−1) to remove free Cas9 and the other receiving no treatment. Proteinase K-treated and untreated samples were then compared side by side on Western blot staining for Cas9. ImageJ software (National Institutes for Health, Bethesda, MD, USA) was used to quantify band intensity and loading efficiency. With optimal conditions, our preliminary results show loading efficiency for sonication and saponin to be 16.7 and 19.2%, respectively, whereas loading by extrusion was undetectable. For CRISPR/Cas targeting, transgenic PFF carrying one copy of H2B-GFP were used to test delivery of ribonucleotide protein complex (RNP). To verify efficiency of the guide (g)RNA targeting green fluorescent protein (GFP), cells were nucleofected with Cas9 and gRNA. The DNA was extracted, PCR amplified, and sequenced (Eton Bioscience, San Diego, CA, USA) and then evaluated for indels with TIDE, resulting in a 53.2% cleavage efficiency. Next, exosomes will be loaded with RNP to knockout GFP in H2B-GFP cells, and targeting efficiency will be evaluated by flow cytometry and TIDE. We hypothesise that based on loading efficiency and target cell uptake, exosomes will present a safe and efficient method for in vitro and in vivo delivery of Cas9. The financial support of the Comparative Medicine Institute is gratefully acknowledged.


2012 ◽  
Vol 476-478 ◽  
pp. 1138-1141
Author(s):  
Zhi Qiang Wei ◽  
Qiang Wei ◽  
Li Gang Liu ◽  
Hua Yang ◽  
Xiao Juan Wu

Ag nanoparticles were successfully synthesized by hydrothermal method under the polyol system combined with traces of sodium chloride, Silver nitrate(AgNO3) and polyvinylpyrrolidone (PVP) acted as the silver source and dispersant respectively. The samples by this process were characterized via X-ray powder diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED) to determine the chemical composition, particle size, crystal structure and morphology. The experiment results indicate that the crystal structure of the samples is face centered cubic (FCC) structure as same as the bulk materials, The specific surface area is 24 m2/g, the particle size distribution ranging from10 to 50 nm, with an average particle size about 26 nm obtained by TEM and confirmed by XRD and BET results.


2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.


2021 ◽  
Vol 6 (1) ◽  
pp. 32-36
Author(s):  
Anh Quoc Le ◽  
Van Phu Dang ◽  
Ngoc Duy Nguyen ◽  
Kim Lan Nguyen Thi ◽  
Kim Lang Vo Thi ◽  
...  

Silver nanoparticles (AgNPs) doped in the zeolite framework (AgNPs/Z) were successfully synthesized by γ-irradiation in ethanol solution of silver ion-zeolite (Ag+/Z) prepared by ion exchange reaction between silver nitrate (AgNO3) and zeolite 4A. The effects of the Ag+ concentration and irradiation dose on the formation of AgNPs/Z were also investigated. AgNPs/Z with the silver content of about 10,000 ppm and the average particle size of AgNPs of about 27 nm was characterized by ultraviolet-visible spectroscopy, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM). Firstly, AgNPs/Z was added into PP resins for creation of PP-AgNPs/Z masterbatch (Ag content of ~10.000 ppm) and then PP-AgNPs/Z plastics were preapared by mixing masterbatch with PP resins. The antibacterial activity of the PP-AgNPs/Z plastics was investigated against Gram-negative bacteria Escherichia coli (E. coli). The results showed that PP-AgNPs/Z plastic contained 100 ppm of Ag possessed a high antibacterial property, namely the bactericidal effect was more than 96 % on the platic surface. In conclusion, possessing many advantages such as: vigorously antibacterial effect and good dispersion in plastic matrix, AgNPs/Z is promising to be applied as bactericidal agent for plastic industry.


2017 ◽  
Vol 6 (6) ◽  
pp. 517-526 ◽  
Author(s):  
Permender Rathee ◽  
Anjoo Kamboj ◽  
Shabir Sidhu

AbstractBackground:Piperine helps in the improvement of bioavailability through pharmacokinetic interaction by modulating metabolism when administered with other drugs. Nisoldipine is a substrate for cytochrome P4503A4 enzymes. The study was undertaken to assess the influence of piperine on the pharmacokinetics and pharmacodynamics of nisoldipine nanoparticles in rats.Methods:Optimization studies of nanoparticles were performed using Taguchi L9 orthogonal array, and the nanoparticles were formulated by the precipitation method. The influence of piperine and nanoparticles was evaluated by means of in vivo kinetic and dynamic studies by oral administration in rats.Results:The entrapment efficiency, drug loading, ζ potential, and average particle size of optimized nisoldipine-piperine nanoparticles was 89.77±1.06%, 13.6±0.56%, −26.5 mV, and 132±7.21 nm, respectively. The in vitro release in 0.1 n HCl and 6.8 pH phosphate buffer was 96.9±0.48% and 98.3±0.26%, respectively. Pharmacokinetic studies showed a 4.9-fold increase in oral bioavailability and a >28.376±1.32% reduction in systemic blood pressure by using nanoparticles as compared to control (nisoldipine suspension) in Wistar rats.Conclusion:The results revealed that piperine being an inhibitor of cytochrome P4503A4 enzymes enhanced the bioavailability of nisoldipine by 4.9-fold in nanoparticles.


2012 ◽  
Vol 535-537 ◽  
pp. 31-35
Author(s):  
Tao Liu ◽  
Rong Bin Du ◽  
Xue Jun Kong

Composite oxides materials CuSnO3as anode materials for lithium-ion batteries were synthesized by chemical coprecipitation method using SnCl4•5H2O, NH3•H2O and Cu(NO3)2•3H2O as raw materials.The precursor CuSn(OH)6and CuSnO3powders were characterized by thermogravimertric(TG) analysis and differential thermal analysis(DTA), X-ray diffraction(XRD), and transmission electron microscope (TEM). The electrochemical properties of CuSnO3powders as anode materials of lithium ion batteries were investigated comparatively by galvanostatic charge-discharge experiments. The results show the average particle size of amorphous CuSnO3is 70nm. The initial capacity during the first lithium insertion is 1078 mA•h/g and the reversible charge capacity in first cycle is 775 mA•h/g. After 20 cycles, the charge capacity is 640 mA•h/g and this material shows moderate capacity fading with cycling. As a novel anode material for lithium ion batteries, amorphous CuSnO3demonstrates a large capacity and a low insertion potential with respect to Li metal.


2019 ◽  
Vol 19 (11) ◽  
pp. 7487-7492 ◽  
Author(s):  
Supriya ◽  
Jayanta Kumar Basu ◽  
Sonali Sengupta

Synthesis of silver nanoparticles embedded on calcium alginate film and the catalytic property of this film in the reduction of nitrobenzene with sodium borohydride are demonstrated in this work. Natural polymer alginate acts as effective reducing and stabilizing agent in synthesis of silver nanoparticles. Effect of different parameters on the preparation of silver nanoparticles, such as, temperature, concentration of silver precursor and heating time was investigated. As-prepared silver nanoparticles were characterized by transmission electron microscopy, scanning electron microscopy, UV-Vis spectrometry, and atomic absorption spectrometry. Transmission electron microscopy analysis con-firms the formation of silver nanoparticles with particles size range of 3–19 nm and average particle size was found to be 10±4 nm. Effect of concentration of nitrobenzene and sodium borohydride, catalyst loading and temperature on the catalytic reduction of nitrobenzene was studied. Reusability of catalyst was examined in this reduction reaction and the catalyst shows good activity up to 10th run.


2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Malathi Sampath ◽  
Ramya Vijayan ◽  
Ezhilarasu Tamilarasu ◽  
Abiraman Tamilselvan ◽  
Balasubramanian Sengottuvelan

Novel jasmine bud-shaped copper nanoparticles were synthesized by a green chemical reduction method using polyvinylpyrrolidone (PVP) as a capping agent, L-ascorbic acid (AA) as a reducing agent as well as antioxidant agent, isonicotinic acid hydrazide (INH) as a reducing agent, and water as a solvent at 60–70°C (pH-7) in the presence of air. The UV-Vis absorption maximum obtained is 573 nm. The crystal lattice (fcc) structure of Cu Nps was confirmed by X-ray diffraction (XRD). The novel jasmine bud shape was visualized in a transmission electron microscope (TEM). The height of single copper nanobud was 6.41 nm as measured by atomic force microscope (AFM). The average particle size 6.95 nm is obtained by XRD results. Antibacterial activity of the Cu nanobuds was evaluated by testing against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria.


2016 ◽  
Vol 709 ◽  
pp. 66-69
Author(s):  
Jeyashelly Andas ◽  
Rahmah Atikah Rosdi ◽  
Nur Izzati Mohd Anuar

A series of Fe-Co nanoparticles were synthesized via sol-gel route at acidic, neutral and basic condition using rice husk as the silica source. The synthesized nanomaterials were designated as Fe-Co3, Fe-Co7 and Fe-Co9 and characterized by Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) and particle size analyzer. The great effect of pH was clearly evidenced from the shifting in the siloxane bond in the FTIR spectrum. TEM investigation confirmed the existence of discrete and almost sphere like nanoparticles. The particle size decreased with an increase in the pH, registering the smallest average particle size at pH 9. In brief, this study promises a fast, rapid and promising method for the conversion of silica rice husk into nanoscale bimetallic materials.


Processes ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1040
Author(s):  
Nurhanisah Othman ◽  
Siti Nurul Ain Md. Jamil ◽  
Mas Jaffri Masarudin ◽  
Luqman Chuah Abdullah ◽  
Rusli Daik ◽  
...  

Encapsulation of dual compounds of different characters (hydrophilic and hydrophobic) in single nanoparticles carrier could reach the site of action more accurately with the synergistic effect but it is less investigated. In our previous findings, combined-compounds encapsulation and delivery from chitosan nanoparticles were impaired by the hydrophilicity of chitosan. Therefore, hydrophobic modification on chitosan with palmitic acid was conducted in this study to provide an amphiphilic environment for better encapsulation of antioxidants; hydrophobic thymoquinone (TQ) and hydrophilic l-ascorbic acid (LAA). Palmitoyl chitosan nanoparticles (PCNPs) co-loaded with TQ and LAA (PCNP-TQ-LAA) were synthesized via the ionic gelation method. Few characterizations were conducted involving nanosizer, Fourier-transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). UV–VIS spectrophotometry was used to analyze the encapsulation and release efficiency of the compounds in PCNPs. Successfully modified PCNP-TQ-LAA had an average particle size of 247.7 ± 24.0 nm, polydispersity index (PDI) of 0.348 ± 0.043 and zeta potential of 19.60 ± 1.27 mV. Encapsulation efficiency of TQ and LAA in PCNP-TQ-LAA increased to 64.9 ± 5.3% and 90.0 ± 0%, respectively. TQ and LAA in PCNP-TQ-LAA system showed zero-order release kinetics, with a release percentage of 97.5% and 36.1%, respectively. Improved preparation method, encapsulation and release efficiency in this study are anticipated to be beneficial for polymeric nanocarrier development.


Sign in / Sign up

Export Citation Format

Share Document