Thermal Management Technology of a Liquid Cooling Thin-disk Oscillator

2016 ◽  
Vol 45 (3) ◽  
pp. 314007
Author(s):  
杨鹏 YANG Peng ◽  
马仑 MA Lun ◽  
姜彦玲 JIANG Yan-ling ◽  
李伟 LI Wei ◽  
聂荣志 NIE Rong-zhi ◽  
...  
Keyword(s):  
Thermal Management ◽  
Thin Disk ◽  
Liquid Cooling ◽  
Management Technology

scholarly journals Thermal Analysis of Cold Plate with Different Configurations for Thermal Management of a Lithium-Ion Battery

Batteries ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 17
Author(s):  
Seyed Saeed Madani ◽  
Erik Schaltz ◽  
Søren Knudsen Kær
Keyword(s):  
Thermal Analysis ◽  
Temperature Distribution ◽  
Lithium Ion Battery ◽  
Thermal Management ◽  
Electric Vehicles ◽  
Heat Dissipation ◽  
Lithium Ion ◽  
Cold Plate ◽  
Liquid Cooling ◽  
Cooling Design

Thermal analysis and thermal management of lithium-ion batteries for utilization in electric vehicles is vital. In order to investigate the thermal behavior of a lithium-ion battery, a liquid cooling design is demonstrated in this research. The influence of cooling direction and conduit distribution on the thermal performance of the lithium-ion battery is analyzed. The outcomes exhibit that the appropriate flow rate for heat dissipation is dependent on different configurations for cold plate. The acceptable heat dissipation condition could be acquired by adding more cooling conduits. Moreover, it was distinguished that satisfactory cooling direction could efficiently enhance the homogeneity of temperature distribution of the lithium-ion battery.

Two-phase evaporative battery thermal management technology for EVs/HEVs

2017 ◽  
Vol 18 (5) ◽  
pp. 875-882 ◽  
Author(s):  
Rahman Ataur ◽  
Mohammed Nurul Amin Hawlader ◽  
Helmi Khalid
Keyword(s):  
Thermal Management ◽  
Two Phase ◽  
Battery Thermal Management ◽  
Management Technology

A comparative study between air cooling and liquid cooling thermal management systems for a high-energy lithium-ion battery module

2021 ◽  
Vol 198 ◽  
pp. 117503 ◽  
Author(s):  
Mohsen Akbarzadeh ◽  
Theodoros Kalogiannis ◽  
Joris Jaguemont ◽  
Lu Jin ◽  
Hamidreza Behi ◽  
...  
Keyword(s):  
Comparative Study ◽  
Lithium Ion Battery ◽  
Thermal Management ◽  
Lithium Ion ◽  
High Energy ◽  
Management Systems ◽  
Air Cooling ◽  
Liquid Cooling ◽  
Battery Module

Synchronreluktanz-Motorspindeln in Werkzeugmaschinen*/Synchronous reluctance motor spindles in machine tools – Energy-efficient drives increase accuracy and reduce cooling requirements of machining centers

2019 ◽  
Vol 109 (01-02) ◽  
pp. 72-80
Author(s):  
M. Weber ◽  
M. Helfert ◽  
F. Unterderweide ◽  
E. Abele ◽  
M. Weigold
Keyword(s):  
Thermal Management ◽  
Energy Efficient ◽  
Machine Tools ◽  
Production Management ◽  
Energy Savings ◽  
Cooling System ◽  
Holistic View ◽  
Synchronous Reluctance Motor ◽  
Management Technology ◽  
Reluctance Motor

Im Rahmen des vom Bundesministerium für Wirtschaft und Energie (BMWi) geförderten Projekts „ETA-Fabrik“ am Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen (PTW) der Technischen Universität Darmstadt konnte die Energieeffizienz von Motorspindeln als Hauptenergieverbraucher von Werkzeugmaschinen durch Einsatz der Synchronreluktanztechnologie gesteigert werden. In der Konsequenz ergeben sich weitere Energieeinsparpotenziale und produktionstechnische Vorteile durch eine gesamtenergetische Betrachtung der Werkzeugmaschine mit Kühlsystem und intelligentem Spindelthermomanagement.   As part of the ‘ETA-Fabrik’ project funded by the BMWi, the Institute of Production Management, Technology and Machine Tools (PTW) of the TU Darmstadt has used synchronous reluctance drives to increase the energy efficiency of motor spindles as main energy consumers of machine tools. Subsequently, new opportunities for energy savings and advantages for the manufacturing process arise by taking a holistic view on machine tools including the cooling system, proposing an intelligent spindle thermal management.

Design, Development, and Characterization of a Flow Control Device for Dynamic Cooling of Liquid-Cooled Servers

2021 ◽  
Author(s):  
Pardeep Shahi ◽  
Apurv Deshmukh ◽  
Hardik Hurnekar ◽  
Satyam Saini ◽  
Pratik V Bansode ◽  
...  
Keyword(s):  
Thermal Management ◽  
Flow Rate ◽  
Control Device ◽  
Servo Motor ◽  
Pumping Power ◽  
Liquid Cooling ◽  
Flow Rates ◽  
Flow Control Device ◽  
Dynamic Cooling ◽  
Valve Position

Abstract Transistor density trends till recently have been following Moore's law, doubling every generation resulting in increased power density. The computational performance gains with the breakdown of Moore's law were achieved by using multi-core processors, leading to non-uniform power distribution and localized high temperatures making thermal management even more challenging. Cold plate-based liquid cooling has proven to be one of the most efficient technologies in overcoming these thermal management issues. Traditional liquid-cooled data center deployments provide a constant flow rate to servers irrespective of the workload, leading to excessive consumption of coolant pumping power. Therefore, a further enhancement in the efficiency of implementation of liquid cooling in data centers is possible. The present investigation proposes the implementation of dynamic cooling using an active flow control device to regulate the coolant flow rates at the server level. This device can aid in pumping power savings by controlling the flow rates based on server utilization. The FCD design contains a V-cut ball valve connected to a micro servo motor used for varying the device valve angle. The valve position was varied to change the flow rate through the valve by servo motor actuation based on pre-decided rotational angles. The device operation was characterized by quantifying the flow rates and pressure drop across the device by changing the valve position using both CFD and experiments. The proposed FCD was able to vary the flow rate between 0.09 lpm to 4 lpm at different valve positions.

Sign in / Sign up

Export Citation Format

Share Document