scholarly journals CFD Simulation of the Airflow Distribution Inside Cube-Grow

CFD Letters ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 81-89
Author(s):  
Arina Mohd Noh ◽  
Hamdan Mohd Noor ◽  
Fauzan Ahmad
Keyword(s):  
Plant Growth ◽  
Urban Agriculture ◽  
Cfd Simulation ◽  
Measurement Data ◽  
Actual Measurement ◽  
Airflow Distribution ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results ◽  
Urban People ◽  
Air Hole

Cube-Grow was developed by MARDI to promote urban agriculture to the urban population. The product enables urban people to grow their vegetables with limited space. The initial test run of the system shows that the plant growth inside the structure was below expectation. The problem arises due to a lack of airflow or improper ventilation inside the structure. Optimum ventilation or airflow is crucial for plant growth as it enhances evapotranspiration at the leaf area to promote optimum plant growth. Therefore, this study aims to increase the airflow inside the Cube-Grow and find the best location for the air hole. Computational fluid dynamics (CFD) simulation was used in this study the analyse the effect of adding an air hole to the airflow characteristic inside the Cube-Grow. CFD also was used to select the best location to place the air hole. 3 option of air hole location was analysed and the results were compared with the existing design. The initial CFD simulation results were compared with the actual measurement data before it was used for further analysis. The result shows that adding an air hole increases overall airflow inside the Cube-Grow. Option 3 was chosen as the best location for the air hole as it produces a uniform and higher airflow inside the Cube-Grow. The study proved that CFD was able to be used to optimize the design of Cube-Grow before the actual prototype was built.

scholarly journals Energy-Efficient Improvement Approaches through Numerical Simulation and Field Measurement for a Data Center

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2757 ◽  
Author(s):  
Fujen Wang ◽  
Yishun Huang ◽  
BowoYuli Prasetyo
Keyword(s):  
Numerical Simulation ◽  
Data Center ◽  
Cfd Simulation ◽  
Field Measurements ◽  
Heat Index ◽  
Temperature Index ◽  
Performance Indexes ◽  
Airflow Distribution ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results

The power density of electronic equipment increased dramatically recently. Data center and data processing and telecommunication facilities are facing the exceptionally high sensible heat loads which result in a large amount of energy consumption. In this study, a numerical simulation using computational fluid dynamics (CFD) was conducted to investigate the influence of alternative approaches to avoid bypassing and recirculation for air distribution in a full-scale data center. Field measurements were extensively conducted to validate the simulation results. Various performance indexes were adopted to enhance the evaluation of the thermal performance of the data center. The simulation results revealed that the practice with hot aisle enclosure and the installation of blocking panels for the unoccupied racks can provide satisfactory airflow distribution and thermal management under low load conditions. The return temperature index (RTI) can be improved by 3% through CFD simulation through installation of the blank panels, which reveals the reduction of recirculation airflow. The return heat index (RHI) increases by 8%, which presents a reduction of bypass airflow. A practical experiment using physical air curtains was conducted to enclose the hot aisle in the data center, which also reveals an 8% improvement for bypass airflow. Higher cooling performance can be achieved via reduction of recirculation and bypass airflow in the data center. Through the simulation of different improvement approaches in the data center, the optimum practice for cooling airflow arrangement can be identified accordingly.

scholarly journals Influence of Lawns on the Summer Thermal Environment and Microclimate of Heritage Sites: A Case Study of Fuling Mausoleum, China

2020 ◽  
Author(s):  
Xiaoyu Wang ◽  
Peng Liu ◽  
Gongwen Xu
Keyword(s):  
Cfd Simulation ◽  
Simulation Analysis ◽  
Thermal Environment ◽  
Measurement Data ◽  
Ground Temperature ◽  
Rapid Urbanization ◽  
Actual Measurement ◽  
Heritage Sites ◽  
Human Thermal Comfort ◽  
The Impact

Abstract The thermal environment and microclimate of heritage sites has been severely impacted by rapid urbanization. This study collected various meteorological measurement data as a reference for computational fluid dynamics (CFD) simulation settings. Then CFD was applied to simulate the impact of lawns on the thermal environment and microclimate of Fuling Mausoleum. We found that lawns and soil can cool the air through evaporation, and thus have a specific cooling effect on the bricked ground. After lawns were planted, the bricked ground temperature decreased by 1.56–17.54°C than that before lawns were planted at 14:00, a decrease of 2.68%–24.20%. Under normal circumstances, when the wind speed or relative humidity increased, the ground temperature dropped. Greenbelt vegetation can adjust the microclimate and human thermal comfort indicators. The consistency of the difference between the actual measurement and the CFD simulation results shows that CFD simulation can thus accurately reflect the internal temperature field distribution if the selection of simulation parameters is reasonable. Theoretical calculation and analysis, experimental measurement research, and modern computer simulation analysis methods applied together constitute a complete system for studying modern physical environmental problems and can provide reliable and economic results.

Optimal Hardware Placement in a Minitower Computer Enclosure System

2011 ◽  
Author(s):  
M. Alfaro Cano ◽  
A. Hernandez-Guerrero ◽  
C. Rubio Arana ◽  
Aristotel Popescu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Simulation ◽  
Operating Temperature ◽  
Optimal Placement ◽  
Cfd Analysis ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results ◽  
The Relationship ◽  
Key Questions

One of the requirements for existing personal computers, PCs, is that the hardware inside must maintain an operating temperature as low as possible. One way to achieve that is to place the hardware components at locations with enough airflow around it. However, the relationship between the airflow and temperature of the components is unknown before they are placed at specific locations inside a PC. In this work a Computational Fluid Dynamics (CFD) analysis is coupled to a Design of Experiment (DOE) methodology to answer typical minitower key questions: a) how do the possible positions of hardware components affect their temperature?, and b) is it possible to get an optimal placement for these hardware components using the data collected by the CFD simulation results? The DOE methodology is used to optimize the analysis for a very large number of possible configurations. The results help in identifying where the efforts need to be placed in order to optimize the positioning of the hardware components for similar configurations at the designing stage. Somehow the results show that general conclusions could be drawn, but that there are not specific rules that could be applied to every configuration.

Simulation on Flow Field and Temperature Field in Water Cooling Tuyere of Blast Furnace

2013 ◽  
Vol 753-755 ◽  
pp. 2709-2712 ◽  
Author(s):  
Ya Na Qie ◽  
Shu Hui Zhang ◽  
Qing Lv ◽  
Li Hong Zhang
Keyword(s):  
Temperature Field ◽  
Economic Benefit ◽  
Cfd Simulation ◽  
Water Pressure ◽  
High Yield ◽  
Maximum Temperature ◽  
Water Cooling ◽  
Direct Motion ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results

Life span of water cooling tuyere is one of important factors of blast furnace’s direct motion and high yield. In order to improve the life of tuyere, the flow fleld and temperature field of tuyere were simulated by using computational fluid dynamics (CFD). Simulation results show that the maximum temperature appears at the front margin of tuyere outlet side. The highest temperature of tuyere reduces significantly with the increase of water pressure below 0.4MPa. When the water pressure exceeds 0.4Pa, the highest temperature reduces slowly. In consideration of economic benefit and cooling effect, the best point of inlet pressure is 0.4MPa or so.

scholarly journals Performance Assessment of Bladeless Micro-Expanders Using 3D Numerical Simulation

2019 ◽  
Vol 113 ◽  
pp. 03016 ◽  
Author(s):  
Avinash Renuke ◽  
Alberto Traverso ◽  
Matteo Pascenti
Keyword(s):  
Shear Stress ◽  
Cfd Simulation ◽  
Numerical Data ◽  
Flow Density ◽  
Cfd Analysis ◽  
Mixing Zone ◽  
Sst Turbulence Model ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results ◽  
First Time

This paper summarizes the development of fully 3D Computational Fluid Dynamics (CFD) analysis for bladeless air micro expander for 200 W and 3 kW rated power. Modelling of nozzle along with rotor is done using structured mesh. This analysis, for the first time, demonstrates the interaction between nozzle and rotor using compressible flow density-based solver. The Shear Stress Transport (SST) turbulence model is employed to resolve wall effects on the rotor and to determine the shear stress accurately. The results illustrate the flow field inside stator and rotor along with complicated mixing zone between stator and rotor. The comparison of rotor-stator CFD simulation results is done with experiments to preliminary validate the model. The losses in the turbine are discussed with the help of experimental and numerical data.

Effect of Baffle Openings to the Flow Distribution in a SERVCO Fume Cupboard

2014 ◽  
Vol 660 ◽  
pp. 719-723
Author(s):  
Mohd Amal Asrol Omar ◽  
Wirachman Wisnoe ◽  
Azman Bakri
Keyword(s):  
Fluid Dynamics ◽  
Cross Sections ◽  
Recirculation Zone ◽  
Cfd Simulation ◽  
Flow Distribution ◽  
Recirculation Region ◽  
Large Size ◽  
Airflow Distribution ◽  
Potential Contributor ◽  
Computational Fluid Dynamics Cfd

Recirculation region behind a fume cupboard sash is the potential contributor to the leakage of the contaminants due to its large size. This is found from the computational fluid dynamics (CFD) simulation of SERVCO fume cupboard using κ-ω turbulence model. For a good fume cupboard, the recirculation zone needs to be minimized while maintaining the flow distribution to all area in the fume cupboard. The opening on the baffle may reduce the recirculation zone which in turn may reduce back flow that is the cause of leakage. In this paper, the effect of shape of baffle openings on flow distributions of a SERVCO fume cupboard will be presented as a result of CFD. The results are presented in terms of velocity vectors Vy (in the direction towards the sash opening) at different cross sections for 4 opening shapes. The opening is found to improve the airflow distribution.

Theoretical Study and CFD Simulation of Airflow Distribution through a Cold Store

2012 ◽  
Vol 170-173 ◽  
pp. 3543-3549 ◽  
Author(s):  
Yi Tang ◽  
Jing Xie ◽  
Chen Miao ◽  
Jin Feng Wang ◽  
Yi Zheng
Keyword(s):  
Cfd Simulation ◽  
Vertical Plane ◽  
Simple Algorithm ◽  
Three Dimension ◽  
Wall Function ◽  
3D Technology ◽  
Airflow Distribution ◽  
Cold Store ◽  
Airflow Field ◽  
Computational Fluid Dynamics Cfd

Recently, the quantity of the cold store has been increased quickly. It is a key point to improve the uniformity of airflow field to the cold store. In this paper, a model of simulating cold store by computational fluid dynamics (CFD) was introduced. Simple algorithm combined with Boussineq assumption was used and turbulent equation combined with standard wall function was applied to define the flow of air in the cold store. Both the structured mesh and unstructured mesh to cold store model were simulated. The simulation methods of airflow in a cold store between three-dimension (3D) technology and two-dimension (2D) technology were also discussed. The experiment was validated and proved that unstructured grid was in better agreement with the result of experiments and it was gotten that the three-dimension (3D) technology had a higher accuracy in simulation of airflow distribution. The airflow distribution in the vertical plane and horizontal plane in cold store were gotten, respectively.

scholarly journals Influence of grass lawns on the summer thermal environment and microclimate of heritage sites: a case study of Fuling mausoleum, China

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Xiaoyu Wang ◽  
Peng Liu ◽  
Gongwen Xu
Keyword(s):  
Cfd Simulation ◽  
Simulation Analysis ◽  
Thermal Environment ◽  
Measurement Data ◽  
Ground Temperature ◽  
Rapid Urbanization ◽  
Actual Measurement ◽  
Heritage Sites ◽  
Human Thermal Comfort ◽  
The Impact

AbstractThe thermal environment and microclimate of heritage sites has been severely impacted by rapid urbanization. This study collected various meteorological measurement data as a reference for computational fluid dynamics (CFD) simulation settings. Then CFD was applied to simulate the impact of lawns on the thermal environment and microclimate of Fuling Mausoleum. We found that lawns and soil can cool the air through evaporation, and thus have a specific cooling effect on the bricked ground. Simulations with the lawns, the bricked ground temperature decreased by 1.56–17.54 °C than that simulations without the lawns at 14:00, a decrease of 2.68%–24.20%. Under normal circumstances, when the wind speed or relative humidity increased, the ground temperature dropped. Greenbelt vegetation can adjust the microclimate and human thermal comfort indicators. The consistency of the difference between the actual measurement and the CFD simulation results shows that CFD simulation can thus accurately reflect the internal temperature field distribution if the selection of simulation parameters is reasonable. Theoretical calculation and analysis, experimental measurement research, and modern computer simulation analysis methods applied together constitute a complete system for studying modern physical environmental problems and can provide reliable and economic results.

Optimization of Quench Tank Structure Based on CFD Simulation

2006 ◽  
Vol 118 ◽  
pp. 363-368 ◽  
Author(s):  
Nai Lu Chen ◽  
Wei Min Zhang ◽  
Qiang Li ◽  
Chang Yin Gao ◽  
Bo Liao ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Flow Rate ◽  
Cfd Simulation ◽  
Draft Tube ◽  
Structure Design ◽  
Rate Distribution ◽  
Large Size ◽  
Solid Foundation ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results

In order to investigate the flow rate distribution and improve the flow rate uniformity of the quenchant in a quench tank, the ultrasonic Doppler velocimeter (UDV) was used to measure the flow rate of quenchant with agitation, and then a computational fluid dynamics (CFD) simulation was carried out to simulate the flow rate distribution without / with flow baffles. According to the CFD simulation results, the structures and positions of flow baffles in the draft-tube were optimized to obtain the uniform flow rate distribution in the quench zone, which were verified by experiments as well. The simulation and experimental results show that the UDV is suitable for measuring the flow rate of a large-size quench tank. This research provided a solid foundation for optimizing the structure design of flow baffles in production quench tanks.

A Study of a New Bidirectional Pressure-Regulating Valve for Hydraulically Interconnected Suspension Systems

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Liang Luo ◽  
Nong Zhang ◽  
Minyi Zheng ◽  
Jinglai Wu ◽  
Bo Zhu
Keyword(s):  
Cfd Simulation ◽  
Detailed Structure ◽  
Pressure Shock ◽  
Suspension Systems ◽  
System Pressure ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results ◽  
Driving Conditions ◽  
Structure And Functions ◽  
Hydraulic Circuits

Abstract Due to inevitable inner leakage in hydraulic circuits and structural limits of a hydraulically interconnected suspension (HIS) system, pressure difference between HIS's two independent hydraulic circuits leads to vehicular unbalance under noncornering driving conditions and deteriorates HIS's performance under steering driving conditions. In order to address this problem, a new bidirectional pressure-regulating valve was designed to balance hydraulic pressures in the two HIS's hydraulic circuits under noncornering driving conditions. Moreover, it separates the two hydraulic circuits and enables HIS's antirollover function under cornering driving conditions. Detailed structure and functions of this valve were introduced first. Systematic and computational fluid dynamics (CFD) simulation results show that the gap between the spool and cylinder is of importance to valve's performance. Experimental results validate that the developed valve satisfies all requirements of the HIS. Furthermore, the valve can distinguish steering and nonsteering conditions and enables HIS's function accurately without any pressure shock.

Sign in / Sign up

Export Citation Format

Share Document