scholarly journals Three Dimensional MHD Hybrid Nanofluid Flow with Rotating Stretching/Shrinking Sheet and Joule Heating

CFD letters ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1-19
Author(s):  
Yuan Ying Teh ◽  
Adnan Ashgar
Keyword(s):  
Boundary Layer Thickness ◽  
Stretching Sheet ◽  
Magnetic Parameter ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Cu Nanoparticles ◽  
Nanofluid Flow ◽  
Nanoparticles Volume Fraction

A three-dimensional hybrid nanofluid flow over a stretching/shrinking sheet is numerically studied. The hybrid nanofluid being considered in this study used water as the base fluid and mixed with two types of solid nanoparticles, namely alumina (Al2O3) and copper (Cu). The main focus of the current study is to examine the effect of magnetic field, Joule heating, and rotating sheet on the velocity, and temperature profiles. In addition, the impact of suction and stretching sheet on the variations of reduced skin friction, , and reduced heat transfer are studied as well. The fluid flow and heat transfer problem presented in this study is governed by a system of nonlinear partial differential equations (PDEs), which is then transformed into the corresponding system of high order nonlinear ordinary differential equations (ODEs) using similarity variables. The resulting system of higher order nonlinear ODEs is solved numerically using a boundary value solver known as bvp4c, which operates on the MATLAB computational platform. Results revealed that dual solutions exist for shrinking sheet while unique solutions are observed for stretching sheet with various values of Cu nanoparticles volume fraction and magnetic parameter. Dual solutions also exist for the value of the suction parameter greater than its critical point with various values of Cu nanoparticles volume fraction. Velocity profile of the hybrid nanofluid increases alongside with the value of magnetic parameter but declination was observed in the profile of and temperature, for both solutions as the value of Cu nanoparticles volume fraction increases. When the value of rotational parameter increases, both velocity and profiles increase for both solutions. This indicates that the momentum boundary layer thickness increases with increasing values of for both solutions, but thermal boundary layer thickness decreases for the first solution and increases for the second solution. Finally, an increment in the value of Eckert number causes the temperature of the hybrid nanofluid to rise as well for both first and second solutions.

Three-Dimensional Hybrid Nanofluid Flow and Heat Transfer past a Permeable Stretching/Shrinking Sheet with Velocity Slip and Convective Condition

2020 ◽  
Vol 66 ◽  
pp. 157-171 ◽  
Author(s):  
Najiyah Safwa Khashi'ie ◽  
Norihan Md Arifin ◽  
Ioan Pop ◽  
Roslinda Nazar ◽  
Ezad Hafidz Hafidzuddin ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Three Dimensional ◽  
Velocity Slip ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Convective Condition ◽  
Nanofluid Flow ◽  
Flow And Heat Transfer

Numerical investigation of three-dimensional nanofluid flow with heat and mass transfer on a nonlinearly stretching sheet using the barycentric functions

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Soraya Torkaman ◽  
Ghasem Barid Loghmani ◽  
Mohammad Heydari ◽  
Abdul-Majid Wazwaz
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Stretching Sheet ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Operational Matrices ◽  
Nanofluid Flow ◽  
Content Type ◽  
Nonlinearly Stretching Sheet

Purpose The purpose of this paper is to investigate a three-dimensional boundary layer flow with considering heat and mass transfer on a nonlinearly stretching sheet by using a novel operational-matrix-based method. Design/methodology/approach The partial differential equations that governing the problem are converted into the system of nonlinear ordinary differential equations (ODEs) with considering suitable similarity transformations. A direct numerical method based on the operational matrices of integration and product for the linear barycentric rational basic functions is used to solve the nonlinear system of ODEs. Findings Graphical and tabular results are provided to illustrate the effect of various parameters involved in the problem on the velocity profiles, temperature distribution, nanoparticle volume fraction, Nusselt and Sherwood number and skin friction coefficient. Comparison between the obtained results, numerical results based on the Maple's dsolve (type = numeric) command and previous existing results affirms the efficiency and accuracy of the proposed method. Originality/value The motivation of the present study is to provide an effective computational method based on the operational matrices of the barycentric cardinal functions for solving the problem of three-dimensional nanofluid flow with heat and mass transfer. The convergence analysis of the presented scheme is discussed. The benefit of the proposed method (PM) is that, without using any collocation points, the governing equations are converted to the system of algebraic equations.

scholarly journals Optimization of Heat Transfer Properties of Nanofluid Flow Over a Shrinking Surface Through Mathematical Modeling

2020 ◽  
Vol 25 (2) ◽  
pp. 40-56 ◽  
Author(s):  
A. Bhandari ◽  
R.K. Pavan Kumar Pannala
Keyword(s):  
Magnetic Parameter ◽  
Volume Fraction ◽  
Three Dimensional ◽  
The Finite Element Method ◽  
Nanofluid Flow ◽  
Thermal Buoyancy ◽  
Similarity Transformations ◽  
Permeability Parameter ◽  
Shrinking Surface ◽  
Transfer Properties

AbstractIn the current study, a three dimensional incompressible magnetohydrodynamic (MHD) nanofluid flow over a shrinking surface with associated thermal buoyancy, thermal radiation, and heating absorption effects, as well as viscous dissipation have been investigated. The model has been represented in a set of partial differential equations and is transformed using suitable similarity transformations which are then solved by using the finite element method through COMSOL. The results for velocity and temperature profiles are provided for various values of the shrinking parameter, Biot’s number, heat generation/absorption parameter, thermal Grashof number, nanoparticle volume fraction, permeability parameter, magnetic parameter and radiation parameter.

scholarly journals Mathematical analysis of bio-convective micropolar nanofluid

2019 ◽  
Vol 6 (3) ◽  
pp. 233-242 ◽  
Author(s):  
Sohail Nadeem ◽  
Muhammad Naveed Khan ◽  
Noor Muhammad ◽  
Shafiq Ahmad
Keyword(s):  
Differential Equations ◽  
Microbial Fuel Cells ◽  
Shooting Method ◽  
Stretching Sheet ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Convection Flow ◽  
Micropolar Nanofluid ◽  
Exponentially Stretching ◽  
Micro Organisms

Abstract The present investigation concentrates on three dimensional unsteady forced bio-convection flow of a viscous fluid. An incompressible flow of a micropolar nanofluid encloses micro-organisms past an exponentially stretching sheet with magnetic field is analyzed. By employing convenient transformation the partial differential equations are converted into the ordinary differential equations which are non-linear. By using shooting method to solved these equations numerically. The influence of the determining parameters on the velocity, temperature, micro-rotation, nanoparticle volume fraction, microorganism are incorporated. The skin friction, heat transfer rate, and the microorganism rate are analyzed. The results depicts that the value of the wall shear stress and Nusselt number are declined while an enhancement take place in the microorganism number. The slip parameters increases the velocity, thermal energy, and microorganism number consequentially. The present investigation are important in improving achievement of microbial fuel cells.

scholarly journals Melting Effect on Unsteady Hydromagnetic Flow of a Nanofluid Past a Stretching Sheet

2011 ◽  
Vol 9 (1) ◽  
Author(s):  
Ali J. Chamkha ◽  
A.M. Rashad ◽  
Eisa Al-Meshaiei
Keyword(s):  
Stretching Sheet ◽  
Volume Fraction ◽  
Transverse Magnetic ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Time Histories ◽  
Nanoparticles Volume Fraction ◽  
Layer Flow ◽  
Stretching Plate ◽  
Melting Effect

This paper considers unsteady, laminar, boundary-layer flow with heat and mass transfer of a nanofluid along a horizontal stretching plate in the presence of a transverse magnetic field, melting and heat generation or absorption effects. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The governing partial differential equations are transformed into a set of non-similar equations and solved numerically by an efficient implicit, iterative, finite-difference method. A parametric study illustrating the influence of various physical parameters is performed. Numerical results for the steady-state velocity, temperature and nanoparticles volume fraction profiles as well as the time histories of the skin-friction coefficient, Nusselt number and the Sherwood number are presented graphically and discussed.

Dual similarity solutions because of mixed convective flow of a double-nanoparticles hybrid nanofluid: critical points and stability analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ioan Pop ◽  
Mohammadreza Nademi Rostami ◽  
Saeed Dinarvand
Keyword(s):  
Stability Analysis ◽  
Differential Equations ◽  
Flow Regime ◽  
Magnetic Parameter ◽  
Volume Fraction ◽  
Similarity Solutions ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Buoyancy Parameter ◽  
Mixed Convective Flow

Purpose The purpose of this article is to study the steady laminar magnetohydrodynamics mixed convection stagnation-point flow of an alumina-graphene/water hybrid nanofluid with spherical nanoparticles over a vertical permeable plate with focus on dual similarity solutions. Design/methodology/approach The single-phase hybrid nanofluid modeling is based on nanoparticles and base fluid masses instead of volume fraction of first and second nanoparticles as inputs. After substituting pertinent similarity variables into the basic partial differential equations governing on the problem, the authors obtain a complicated system of nondimensional ordinary differential equations, which has non-unique solution in a certain range of the buoyancy parameter. It is worth mentioning that, the stability analysis of the solutions is also presented and it is shown that always the first solutions are stable and physically realizable. Findings It is proved that the magnetic parameter and the wall permeability parameter widen the range of the buoyancy parameter for which the solution exists; however, the opposite trend is valid for second nanoparticle mass. Besides, mass suction at the surface of the plate as well as magnetic parameter leads to reduce both hydrodynamic and thermal boundary layer thicknesses. Moreover, the assisting flow regime always has higher values of similarity skin friction and Nusselt number relative to opposing flow regime. Originality/value A novel mass-based model of the hybridity in nanofluids has been used to study the foregoing problem with focus on dual similarity solutions. The results of this paper are completely original and, to the best of the authors’ knowledge, the numerical results of the present paper were never published by any researcher.

Three-dimensional flow of radiative hybrid nanofluid past a permeable stretching/shrinking sheet with homogeneous-heterogeneous reaction

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Najiyah Safwa Khashi'ie ◽  
Norihan Md Arifin ◽  
Natalia C. Rosca ◽  
Alin V. Rosca ◽  
Ioan Pop
Keyword(s):  
Heterogeneous Reaction ◽  
Three Dimensional ◽  
Heterogeneous Reactions ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Three Dimensional Flow ◽  
Suction Parameter ◽  
Content Type ◽  
Fluid Concentration ◽  
The Stability

Purpose The purpose of this paper is to study the effects of thermal radiation and homogeneous-heterogeneous reactions in the three-dimensional hybrid nanofluid flow past a permeable stretching/shrinking sheet. Design/methodology/approach The combination of aluminum oxide (Al2O3) and copper (Cu) nanoparticles with total volumetric concentration is numerically analyzed using the existing correlations of hybrid nanofluid. With the consideration that both homogeneous and heterogeneous reactions are isothermal while the diffusion coefficients of both autocatalyst and reactant are same, the governing model is simplified into a set of differential (similarity) equations. Findings Using the bvp4c solver, dual solutions are presented, and the stability analysis certifies the physical/real solution. The findings show that the suction parameter is requisite to induce the steady solution for shrinking parameter. Besides, the fluid concentration owing to the shrinking sheet is diminished with the addition of surface reaction. Originality/value The present findings are novel and can be a reference point to other researchers to further analyze the heat transfer performance and stability of the working fluids.

Sign in / Sign up

Export Citation Format

Share Document