scholarly journals Targetless Coregistration of Terrestrial Laser Scanning Point Clouds Using a Multi Surrounding Scan Image-Based Technique

2020 ◽  
Vol 1 (1) ◽  
pp. 01-07
Author(s):  
Bashar Alsadik
Keyword(s):  
Image Matching ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Experimental Tests ◽  
Point Clouds ◽  
Data Set ◽  
Panoramic Images ◽  
Fine Registration ◽  
Rgb Values

The coregistration of terrestrial laser point clouds is widely investigated where different techniques are presented to solve this problem. The techniques are divided either as target-based or targetless approaches for coarse and fine coregistration. The targetless approach is more challenging since no physical reference targets are placed in the field during the scanning. Mainly, targetless methods are image-based and they are applied through projecting the point clouds back to the scanning stations. The projected 360 point cloud images are normally in the form of panoramic images utilizing either intensity or RGB values, and an image matching is followed to align the scan stations together. However, the point cloud coregistration is still a challenge since ICP like methods are applicable for fine registration. Furthermore, image-based approaches are restricted when there is: a limited overlap between point clouds, no RGB data accompanied to intensity values, and unstructured scanned objects in the point clouds. Therefore, we present in this paper the concept of a multi surrounding scan MSS image-based approach to overcome the difficulty to register point clouds in challenging cases. The multi surrounding scan approach means to create multi-perspective images per laser scan point cloud. These multi-perspective images will offer different viewpoints per scan station to overcome the viewpoint distortion that causes the failure of the image matching in challenging situations. Two experimental tests are applied using point clouds collected in Enschede city and the published 3D toolkit data set in Bremen city. The experiments showed a successful coregistration approach even in challenging settings with different constellations.

scholarly journals Architecture of Solution for Panoramic Image Blurring in GIS projects Application

2021 ◽  
Author(s):  
Dejan Vasić ◽  
Marina Davidović ◽  
Ivan Radosavljević ◽  
Đorđe Obradović
Keyword(s):  
Defect Detection ◽  
Point Cloud ◽  
Laser Scanning ◽  
Visual Inspection ◽  
Point Clouds ◽  
Data Sets ◽  
Data Set ◽  
Image Blurring ◽  
Panoramic Images ◽  
Spatial Entities

Abstract. Panoramic images captured using laser scanning technologies, which principally produce point clouds, are readily applicable in colorization of point cloud, detailed visual inspection, road defect detection, spatial entities extraction, diverse maps creation etc. This paper underlines the importance of images in modern surveying technologies and different GIS projects at the same time having regard to their anonymization in accordance with GDPR. Namely, it is a legislative requirement that faces of persons and license plates of vehicles in the collected data are blurred. The objective of this paper is to present a novel architecture of the solution for a particular object blurring. The methodology was tested on four data sets counting 5000, 10 000, 15 000 and 20 000 panoramic images respectively. Percentage of accuracy, i.e. successfully detected and blurred objects of interest, was higher than 97 % for each data set.

scholarly journals Revealing Changes in the Stem Form and Volume Allocation in Diverse Boreal Forests Using Two-Date Terrestrial Laser Scanning

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 835
Author(s):  
Ville Luoma ◽  
Tuomas Yrttimaa ◽  
Ville Kankare ◽  
Ninni Saarinen ◽  
Jiri Pyörälä ◽  
...  
Keyword(s):  
Tree Growth ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Stem Volume ◽  
Accurate Information ◽  
Stem Form ◽  
Monitoring Period ◽  
Significant Difference

Tree growth is a multidimensional process that is affected by several factors. There is a continuous demand for improved information on tree growth and the ecological traits controlling it. This study aims at providing new approaches to improve ecological understanding of tree growth by the means of terrestrial laser scanning (TLS). Changes in tree stem form and stem volume allocation were investigated during a five-year monitoring period. In total, a selection of attributes from 736 trees from 37 sample plots representing different forest structures were extracted from taper curves derived from two-date TLS point clouds. The results of this study showed the capability of point cloud-based methods in detecting changes in the stem form and volume allocation. In addition, the results showed a significant difference between different forest structures in how relative stem volume and logwood volume increased during the monitoring period. Along with contributing to providing more accurate information for monitoring purposes in general, the findings of this study showed the ability and many possibilities of point cloud-based method to characterize changes in living organisms in particular, which further promote the feasibility of using point clouds as an observation method also in ecological studies.

scholarly journals ON A KNOWLEDGE-BASED APPROACH TO THE CLASSIFICATION OF MOBILE LASER SCANNING POINT CLOUDS

2018 ◽  
Vol XLII-4 ◽  
pp. 343-349 ◽  
Author(s):  
M. Lemmens
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Decision Rules ◽  
Point Clouds ◽  
Bench Mark ◽  
Automated Classification ◽  
Initial Experiment ◽  
Data Set ◽  
Knowledge Based

<p><strong>Abstract.</strong> A knowledge-based system exploits the knowledge, which a human expert uses for completing a complex task, through a database containing decision rules, and an inference engine. Already in the early nineties knowledge-based systems have been proposed for automated image classification. Lack of success faded out initial interest and enthusiasm, the same fate neural networks struck at that time. Today the latter enjoy a steady revival. This paper aims at demonstrating that a knowledge-based approach to automated classification of mobile laser scanning point clouds has promising prospects. An initial experiment exploiting only two features, height and reflectance value, resulted in an overall accuracy of 79<span class="thinspace"></span>% for the Paris-rue-Madame point cloud bench mark data set.</p>

scholarly journals Architecture of solution for panoramic image blurring in GIS project application

2021 ◽  
Vol 10 (2) ◽  
pp. 287-296
Author(s):  
Dejan Vasić ◽  
Marina Davidović ◽  
Ivan Radosavljević ◽  
Đorđe Obradović
Keyword(s):  
Laser Scanning ◽  
Personal Information ◽  
Point Clouds ◽  
Search Space ◽  
Legal Framework ◽  
The European Union ◽  
Data Set ◽  
General Data Protection Regulation ◽  
Panoramic Images ◽  
Spatial Entities

Abstract. Panoramic images captured using laser scanning technologies, which principally produce point clouds, are readily applicable in colorization of point cloud, detailed visual inspection, road defect detection, spatial entities extraction, diverse map creation, etc. This paper underlines the importance of images in modern surveying technologies and different GIS projects at the same time having regard to their anonymization in accordance with law. The General Data Protection Regulation (GDPR) is a legal framework that sets guidelines for the collection and processing of personal information from individuals who live in the European Union (EU). Namely, it is a legislative requirement that faces of persons and license plates of vehicles in the collected data are blurred. The objective of this paper is to present a novel architecture of the solution for a particular object blurring. The architecture is designed as a pipeline of object detection algorithms that progressively narrows the search space until it detects the objects to be blurred. The methodology was tested on four data sets counting 5000, 10 000, 15 000 and 20 000 panoramic images. The percentage of accuracy, i.e., successfully detected and blurred objects of interest, was higher than 97 % for each data set. Additionally, our aim was to achieve efficiency and broad use.

scholarly journals Combined Use of Terrestrial Laser Scanning and UAV Photogrammetry in Mapping Alpine Terrain

2019 ◽  
Vol 11 (18) ◽  
pp. 2154 ◽  
Author(s):  
Ján Šašak ◽  
Michal Gallay ◽  
Ján Kaňuk ◽  
Jaroslav Hofierka ◽  
Jozef Minár
Keyword(s):  
High Resolution ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Mutual Orientation ◽  
Close Range Photogrammetry ◽  
Combined Use ◽  
Wide Range ◽  
Close Range

Airborne and terrestrial laser scanning and close-range photogrammetry are frequently used for very high-resolution mapping of land surface. These techniques require a good strategy of mapping to provide full visibility of all areas otherwise the resulting data will contain areas with no data (data shadows). Especially, deglaciated rugged alpine terrain with abundant large boulders, vertical rock faces and polished roche-moutones surfaces complicated by poor accessibility for terrestrial mapping are still a challenge. In this paper, we present a novel methodological approach based on a combined use of terrestrial laser scanning (TLS) and close-range photogrammetry from an unmanned aerial vehicle (UAV) for generating a high-resolution point cloud and digital elevation model (DEM) of a complex alpine terrain. The approach is demonstrated using a small study area in the upper part of a deglaciated valley in the Tatry Mountains, Slovakia. The more accurate TLS point cloud was supplemented by the UAV point cloud in areas with insufficient TLS data coverage. The accuracy of the iterative closest point adjustment of the UAV and TLS point clouds was in the order of several centimeters but standard deviation of the mutual orientation of TLS scans was in the order of millimeters. The generated high-resolution DEM was compared to SRTM DEM, TanDEM-X and national DMR3 DEM products confirming an excellent applicability in a wide range of geomorphologic applications.

scholarly journals Special Issue on “Terrestrial Laser Scanning”: Editors’ Notes

Sensors ◽  
2019 ◽  
Vol 19 (20) ◽  
pp. 4569
Author(s):  
Joan R. Rosell-Polo ◽  
Eduard Gregorio ◽  
Jordi Llorens
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Special Issue ◽  
Alternative Technologies ◽  
Cloud Processing ◽  
3D Point Clouds ◽  
Point Cloud Processing

In this editorial, we provide an overview of the content of the special issue on “Terrestrial Laser Scanning”. The aim of this Special Issue is to bring together innovative developments and applications of terrestrial laser scanning (TLS), understood in a broad sense. Thus, although most contributions mainly involve the use of laser-based systems, other alternative technologies that also allow for obtaining 3D point clouds for the measurement and the 3D characterization of terrestrial targets, such as photogrammetry, are also considered. The 15 published contributions are mainly focused on the applications of TLS to the following three topics: TLS performance and point cloud processing, applications to civil engineering, and applications to plant characterization.

scholarly journals AN AUTOMATIC PROCEDURE FOR MOBILE LASER SCANNING PLATFORM 6DOF TRAJECTORY ADJUSTMENT

2018 ◽  
Vol XLII-1 ◽  
pp. 203-209 ◽  
Author(s):  
Z. Hussnain ◽  
S. Oude Elberink ◽  
G. Vosselman
Keyword(s):  
Image Matching ◽  
Point Cloud ◽  
Laser Scanning ◽  
Aerial Image ◽  
Second Step ◽  
Data Set ◽  
B Splines ◽  
Image Patches ◽  
Trajectory Representation ◽  
Previous Step

<p><strong>Abstract.</strong> In this paper, a method is presented to improve the MLS platform’s trajectory for GNSS denied areas. The method comprises two major steps. The first step is based on a 2D image registration technique described in our previous publication. Internally, this registration technique first performs aerial to aerial image matching, this issues correspondences which enable to compute the 3D tie points by multiview triangulation. Similarly, it registers the rasterized Mobile Laser Scanning Point Cloud (MLSPC) patches with the multiple related aerial image patches. The later registration provides the correspondence between the aerial to aerial tie points and the MLSPC’s 3D points. In the second step, which is described in this paper, a procedure utilizes three kinds of observations to improve the MLS platform’s trajectory. The first type of observation is the set of 3D tie points computed automatically in the previous step (and are already available), the second type of observation is based on IMU readings and the third type of observation is soft-constraint over related pose parameters. In this situation, the 3D tie points are considered accurate and precise observations, since they provide both locally and globally strict constraints, whereas the IMU observations and soft-constraints only provide locally precise constraints. For 6DOF trajectory representation, first, the pose [R, t] parameters are converted to 6 B-spline functions over time. Then for the trajectory adjustment, the coefficients of B-splines are updated from the established observations. We tested our method on an MLS data set acquired at a test area in Rotterdam, and verified the trajectory improvement by evaluation with independently and manually measured GCPs. After the adjustment, the trajectory has achieved the accuracy of RMSE X<span class="thinspace"></span>=<span class="thinspace"></span>9<span class="thinspace"></span>cm, Y<span class="thinspace"></span>=<span class="thinspace"></span>14<span class="thinspace"></span>cm and Z<span class="thinspace"></span>=<span class="thinspace"></span>14<span class="thinspace"></span>cm. Analysing the error in the updated trajectory suggests that our procedure is effective at adjusting the 6DOF trajectory and to regenerate a reliable MLSPC product.</p>

scholarly journals Terrestrial Laser Scanning and Ground Truth Data for Characterizing Downed Dead Wood

2020 ◽  
Author(s):  
Tuomas Yrttimaa ◽  
Ninni Saarinen ◽  
Ville Luoma ◽  
Topi Tanhuanpää ◽  
Ville Kankare ◽  
...  
Keyword(s):  
Boreal Forests ◽  
Laser Scanning ◽  
Dead Wood ◽  
Terrestrial Laser Scanning ◽  
Ground Truth ◽  
Point Clouds ◽  
Data Set ◽  
Ground Truth Data ◽  
Standing Trees ◽  
Downed Dead Wood

The feasibility of terrestrial laser scanning (TLS) in characterizing standing trees has been frequently investigated, while less effort has been put in quantifying downed dead wood using TLS. To advance dead wood characterization using TLS, we collected TLS point clouds and downed dead wood information from 20 sample plots (32 m x 32 m in size) located in southern Finland. This data set can be used in developing new algorithms for downed dead wood detection and characterization as well as for understanding spatial patterns of downed dead wood in boreal forests.

The Advantages of Using Laser Scanners in Surveying in Protected Sites

2015 ◽  
pp. 382-402
Author(s):  
Gülhan Benli
Keyword(s):  
Protected Areas ◽  
Point Cloud ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Laser Scanners ◽  
Point Data

Since the 2000s, terrestrial laser scanning, as one of the methods used to document historical edifices in protected areas, has taken on greater importance because it mitigates the difficulties associated with working on large areas and saves time while also making it possible to better understand all the particularities of the area. Through this technology, comprehensive point data (point clouds) about the surface of an object can be generated in a highly accurate three-dimensional manner. Furthermore, with the proper software this three-dimensional point cloud data can be transformed into three-dimensional rendering/mapping/modeling and quantitative orthophotographs. In this chapter, the study will present the results of terrestrial laser scanning and surveying which was used to obtain three-dimensional point clouds through three-dimensional survey measurements and scans of silhouettes of streets in Fatih in Historic Peninsula in Istanbul, which were then transposed into survey images and drawings. The study will also cite examples of the facade mapping using terrestrial laser scanning data in Istanbul Historic Peninsula Project.

scholarly journals THE USE OF COMPUTER VISION ALGORITHMS FOR AUTOMATIC ORIENTATION OF TERRESTRIAL LASER SCANNING DATA

2016 ◽  
Vol XLI-B3 ◽  
pp. 315-322 ◽  
Author(s):  
Jakub Stefan Markiewicz
Keyword(s):  
Computer Vision ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Terrestrial Laser Scanning ◽  
Depth Map ◽  
Point Clouds ◽  
Terrestrial Laser Scanner ◽  
Key Points ◽  
Source Data ◽  
Panoramic Images

The paper presents analysis of the orientation of terrestrial laser scanning (TLS) data. In the proposed data processing methodology, point clouds are considered as panoramic images enriched by the depth map. Computer vision (CV) algorithms are used for orientation, which are applied for testing the correctness of the detection of tie points and time of computations, and for assessing difficulties in their implementation. The BRISK, FASRT, MSER, SIFT, SURF, ASIFT and CenSurE algorithms are used to search for key-points. The source data are point clouds acquired using a Z+F 5006h terrestrial laser scanner on the ruins of Iłża Castle, Poland. Algorithms allowing combination of the photogrammetric and CV approaches are also presented.

Sign in / Sign up

Export Citation Format

Share Document