Reliability Analysis of Floating Offshore Wind Turbines Support Structure using Hierarchical Bayesian Network

Author(s):  
He Li ◽  
C. Guedes Soares
Author(s):  
Xiaohong Chen ◽  
Qing Yu

This paper presents the research in support of the development of design requirements for floating offshore wind turbines (FOWTs). An overview of technical challenges in the design of FOWTs is discussed, followed by a summary of the case studies using representative FOWT concepts. Three design concepts, including a Spar-type, a TLP-type and a Semisubmersible-type floating support structure carrying a 5-MW offshore wind turbine, are selected for the case studies. Both operational and extreme storm conditions on the US Outer Continental Shelf (OCS) are considered. A state-of-the-art simulation technique is employed to perform fully coupled aero-hydro-servo-elastic analysis using the integrated FOWT model. This technique can take into account dynamic interactions among the turbine Rotor-Nacelle Assembly (RNA), turbine control system, floating support structure and stationkeeping system. The relative importance of various design parameters and their impact on the development of design criteria are evaluated through parametric analyses. The paper also introduces the design requirements put forward in the recently published ABS Guide for Building and Classing Floating Offshore Wind Turbine Installations (ABS, 2013).


Author(s):  
Yu Zhang ◽  
Paul D. Sclavounos

Abstract The development is presented of an analytical model for the prediction of the stochastic nonlinear wave loads on the support structure of bottom mounted and floating offshore wind turbines. Explicit expressions are derived for the time-domain and frequency-domain nonlinear exciting forces in a seastate with significant wave height comparable to the diameter of the support structure based on the fluid impulse theory. The higher order moments of the nonlinear load are evaluated from simulated force records and the derivation of analytical expressions for the nonlinear load statistics for their efficient use in design is addressed.


2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Yu Zhang ◽  
Paul D. Sclavounos

Abstract The development is presented of an analytical model for the prediction of the stochastic nonlinear wave loads on the support structure of bottom-mounted and floating offshore wind turbines. Explicit expressions are derived for the time-domain and frequency-domain nonlinear exciting forces in a seastate with a significant wave height comparable to the diameter of the support structure based on the fluid impulse theory. The higher-order moments of the nonlinear load are evaluated from simulated force records, and the derivation of analytical expressions for the nonlinear load statistics for their efficient use in design is addressed.


2014 ◽  
Vol 134 (8) ◽  
pp. 1096-1103 ◽  
Author(s):  
Sho Tsujimoto ◽  
Ségolène Dessort ◽  
Naoyuki Hara ◽  
Keiji Konishi

2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Jiawen Li ◽  
Jingyu Bian ◽  
Yuxiang Ma ◽  
Yichen Jiang

A typhoon is a restrictive factor in the development of floating wind power in China. However, the influences of multistage typhoon wind and waves on offshore wind turbines have not yet been studied. Based on Typhoon Mangkhut, in this study, the characteristics of the motion response and structural loads of an offshore wind turbine are investigated during the travel process. For this purpose, a framework is established and verified for investigating the typhoon-induced effects of offshore wind turbines, including a multistage typhoon wave field and a coupled dynamic model of offshore wind turbines. On this basis, the motion response and structural loads of different stages are calculated and analyzed systematically. The results show that the maximum response does not exactly correspond to the maximum wave or wind stage. Considering only the maximum wave height or wind speed may underestimate the motion response during the traveling process of the typhoon, which has problems in guiding the anti-typhoon design of offshore wind turbines. In addition, the coupling motion between the floating foundation and turbine should be considered in the safety evaluation of the floating offshore wind turbine under typhoon conditions.


Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 475
Author(s):  
Payam Aboutalebi ◽  
Fares M’zoughi ◽  
Izaskun Garrido ◽  
Aitor J. Garrido

Undesired motions in Floating Offshore Wind Turbines (FOWT) lead to reduction of system efficiency, the system’s lifespan, wind and wave energy mitigation and increment of stress on the system and maintenance costs. In this article, a new barge platform structure for a FOWT has been proposed with the objective of reducing these undesired platform motions. The newly proposed barge structure aims to reduce the tower displacements and platform’s oscillations, particularly in rotational movements. This is achieved by installing Oscillating Water Columns (OWC) within the barge to oppose the oscillatory motion of the waves. Response Amplitude Operator (RAO) is used to predict the motions of the system exposed to different wave frequencies. From the RAOs analysis, the system’s performance has been evaluated for representative regular wave periods. Simulations using numerical tools show the positive impact of the added OWCs on the system’s stability. The results prove that the proposed platform presents better performance by decreasing the oscillations for the given range of wave frequencies, compared to the traditional barge platform.


2021 ◽  
Author(s):  
Athul K. Sundarrajan ◽  
Yong Hoon Lee ◽  
James T. Allison ◽  
Daniel R. Herber

Abstract This paper discusses a framework to design elements of the plant and control systems for floating offshore wind turbines (FOWTs) in an integrated manner using linear parameter-varying models. Multiple linearized models derived from high-fidelity software are used to model the system in different operating regions characterized by the incoming wind speed. The combined model is then used to generate open-loop optimal control trajectories as part of a nested control co-design strategy that explores the system’s stability and power production in the context of crucial plant and control design decisions. A cost model is developed for the FOWT system, and the effect of plant decisions and subsequent power and stability response of the FOWT is quantified in terms of the levelized cost of energy (LCOE) for that system. The results show that the stability constraints and the plant design decisions affect the turbine’s power and, subsequently, LCOE of the system. The results indicate that a lighter plant in terms of mass can produce the same power for a lower LCOE while still satisfying the constraints.


Sign in / Sign up

Export Citation Format

Share Document