IDENTIFYING OPTIMUM GLAZING PROPERTY FOR CONSERVING ENERGY IN HOT SEMI-ARID CLIMATE REGIONS

2021 ◽  
Vol 16 (1) ◽  
pp. 91-101
Author(s):  
Madeeha Altaf ◽  
Frances Hill
Keyword(s):  
Heat Loss ◽  
Energy Use ◽  
Energy Requirement ◽  
Ghg Emissions ◽  
Building Energy ◽  
Building Envelope ◽  
System A ◽  
Building Energy Use ◽  
U Value ◽  
Industry Professionals

ABSTRACT Globally, the building sector is responsible for 40% of energy use and 30% of GHG emissions. The greatest portion of the energy is used during the operational phase (use stage) of buildings. The building envelope, especially the glazed components, plays an important role in determining the energy requirement of buildings. These glazed parts of the building envelope exposed to direct solar radiation are most vulnerable to heat loss and gain. Heat loss and gain through the glazing material depend on glazing properties (U-value, SHGC, VT) and building energy use changes according to the properties of the glazing system. A variety of glazing types has been developed over recent decades that use the properties of the glass as a means of responding to environmental conditions. This study is carried out to identify the optimum glazing property for conserving energy in cooling dominant regions using an early design energy modeling tool. It was found that a low SHGC is the most important glazing property for reducing cooling energy consumption. SHGC of less than 0.3 is found useful. This study would help building industry professionals evaluate the best glazing property while selecting the glazing type.

scholarly journals Building Retrofitting through Coupling of Building Energy Simulation-Optimization Tool with CFD and Daylight Programs

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2180
Author(s):  
Mehrdad Rabani ◽  
Habtamu Bayera Madessa ◽  
Natasa Nord
Keyword(s):  
Energy Use ◽  
Ventilation System ◽  
Building Energy ◽  
Building Envelope ◽  
Energy Simulation ◽  
Building Energy Simulation ◽  
Visual Comfort ◽  
Indoor Climate ◽  
Building Energy Use ◽  
Air System

Simultaneous satisfaction of both thermal and visual comfort in buildings may be a challenging task. Therefore, this paper suggests a comprehensive framework for the building energy optimization process integrating computational fluid dynamics (CFD) daylight simulations. A building energy simulation tool, IDA Indoor Climate and Energy (IDA-ICE), was coupled with three open-source tools including GenOpt, OpenFOAM, and Radiance. In the optimization phase, several design variables i.e., building envelope properties, fenestration parameters, and Heating, Ventilation and Air-Conditioning (HVAC) system set points, were selected to minimize the total building energy use and simultaneously improve thermal and visual comfort. Two different scenarios were investigated for retrofitting of a generic office building located in Oslo, Norway. In the first scenario a constant air volume (CAV) ventilation system with a local radiator in each zone was used, while an all-air system equipped with a demand control ventilation (DCV) was applied in the second scenario. Findings showed that, compared to the reference design, significant reduction of total building energy use, around 77% and 79% in the first and second scenarios, was achieved respectively, and thermal and visual comfort conditions were also improved considerably. However, the overall thermal and visual comfort satisfactions were higher when all-air system was applied.

scholarly journals Evaluation of Urban-Scale Building Energy-Use Models and Tools—Application for the City of Fribourg, Switzerland

2021 ◽  
Vol 13 (4) ◽  
pp. 1595
Author(s):  
Valeria Todeschi ◽  
Roberto Boghetti ◽  
Jérôme H. Kämpf ◽  
Guglielmina Mutani
Keyword(s):  
Machine Learning ◽  
Energy Use ◽  
Residential Buildings ◽  
Building Energy ◽  
Energy Performance ◽  
Space Heating ◽  
Engineering Model ◽  
Building Energy Use ◽  
The Impact ◽  
The City

Building energy-use models and tools can simulate and represent the distribution of energy consumption of buildings located in an urban area. The aim of these models is to simulate the energy performance of buildings at multiple temporal and spatial scales, taking into account both the building shape and the surrounding urban context. This paper investigates existing models by simulating the hourly space heating consumption of residential buildings in an urban environment. Existing bottom-up urban-energy models were applied to the city of Fribourg in order to evaluate the accuracy and flexibility of energy simulations. Two common energy-use models—a machine learning model and a GIS-based engineering model—were compared and evaluated against anonymized monitoring data. The study shows that the simulations were quite precise with an annual mean absolute percentage error of 12.8 and 19.3% for the machine learning and the GIS-based engineering model, respectively, on residential buildings built in different periods of construction. Moreover, a sensitivity analysis using the Morris method was carried out on the GIS-based engineering model in order to assess the impact of input variables on space heating consumption and to identify possible optimization opportunities of the existing model.

scholarly journals A Rapid Review on Community Connected Microgrids

2021 ◽  
Vol 13 (12) ◽  
pp. 6753
Author(s):  
Moiz Masood Syed ◽  
Gregory M. Morrison
Keyword(s):  
Literature Review ◽  
Urban Areas ◽  
Energy Use ◽  
Residential Buildings ◽  
Optimal Solution ◽  
Building Energy ◽  
Rapid Review ◽  
Solar Pv ◽  
Electricity Cost ◽  
Building Energy Use

As the population of urban areas continues to grow, and construction of multi-unit developments surges in response, building energy use demand has increased accordingly and solutions are needed to offset electricity used from the grid. Renewable energy systems in the form of microgrids, and grid-connected solar PV-storage are considered primary solutions for powering residential developments. The primary objectives for commissioning such systems include significant electricity cost reductions and carbon emissions abatement. Despite the proliferation of renewables, the uptake of solar and battery storage systems in communities and multi-residential buildings are less researched in the literature, and many uncertainties remain in terms of providing an optimal solution. This literature review uses the rapid review technique, an industry and societal issue-based version of the systematic literature review, to identify the case for microgrids for multi-residential buildings and communities. The study describes the rapid review methodology in detail and discusses and examines the configurations and methodologies for microgrids.

scholarly journals The Development of a Biomimetic Design Tool for Building Energy Efficiency

Biomimetics ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 50
Author(s):  
Negin Imani ◽  
Brenda Vale
Keyword(s):  
Focus Group ◽  
Qualitative Data ◽  
Energy Use ◽  
Thermal Adaptation ◽  
Building Energy ◽  
Design Tool ◽  
Building Energy Efficiency ◽  
Energy Efficient Buildings ◽  
Building Energy Use ◽  
Architectural Framework

The initial aim of the research was to develop a framework that would enable architects to look for thermoregulation methods in nature as inspiration for designing energy efficient buildings. The thermo-bio-architectural framework (ThBA) assumes designers will start with a thermal challenge in a building and then look in a systematic way for how this same issue is solved in nature. The tool is thus a contribution to architectural biomimicry in the field of building energy use. Since the ThBA was created by an architect, it was essential that the biology side of this cross-disciplinary tool was validated by experts in biology. This article describes the focus group that was conducted to assess the quality, inclusiveness, and applicability of the framework and why a focus group was selected over other possible methods such as surveys or interviews. The article first provides a brief explanation of the development of the ThBA. Given the focus here is on its validation, the qualitative data collection procedures and analysis results produced by NVivo 12 plus through thematic coding are described in detail. The results showed the ThBA was effective in bridging the two fields based on the existing thermal challenges in buildings, and was comprehensive in terms of generalising biological thermal adaptation strategies.

Cost Optimization of Net-Zero Energy House

2007 ◽  
Author(s):  
George A. Mertz ◽  
Gregory S. Raffio ◽  
Kelly Kissock
Keyword(s):  
Energy Use ◽  
Cost Optimization ◽  
Building Design ◽  
Building Energy ◽  
Zero Energy ◽  
Resource Limitations ◽  
Net Zero Energy ◽  
Net Zero ◽  
Building Energy Use ◽  
The Cost

Environmental and resource limitations provide increased motivation for design of net-zero energy or net-zero CO2 buildings. The optimum building design will have the lowest lifecycle cost. This paper describes a method of performing and comparing lifecycle costs for standard, CO2-neutral and net-zero energy buildings. Costs of source energy are calculated based on the cost of photovoltaic systems, tradable renewable certificates, CO2 credits and conventional energy. Building energy simulation is used to determine building energy use. A case study is conducted on a proposed net-zero energy house. The paper identifies the least-cost net-zero energy house, the least-cost CO2 neutral house, and the overall least-cost house. The methodology can be generalized to different climates and buildings. The method and results may be of interest to builders, developers, city planners, or organizations managing multiple buildings.

Sign in / Sign up

Export Citation Format

Share Document