Optimizing Layout of Distributed Generation Sources of Power Supply System of Agricultural Object

2021 ◽  
Vol 10 (3) ◽  
pp. 70-84
Author(s):  
Yuliia Daus ◽  
Valeriy Kharchenko ◽  
Igor Yudaev

The increasing penetration of photovoltaic technology calls for the development of an effective method for optimization of grid-connected photovoltaic power plants. Although extensive studies on the definition, implementation, and optimization of these systems have been conducted, the design and management of a smart energy system remains a critical challenge. The purpose of the work is to increase efficiency of power supply system of agricultural facility by optimizing the placement and selection of parameters of photovoltaic sources of distributed generation. Application of photovoltaic sources of distributed generation as part of power supply system of agricultural enterprise allows to reduce the total consumption from the network in average basing on solar intensity data for 22 years by 40-53% from April to October, which is most expedient in view of the fact that this is a period of intensive work of the enterprise and the greatest load on its consumers; by 24-30% in February, March, and October; and by 14-17% the rest of the time.

2019 ◽  
Vol 114 ◽  
pp. 05007 ◽  
Author(s):  
Felix Byk ◽  
Yana Frolova ◽  
Ludmila Myshkina

The existing centralized power supply system has the alternative due to distributed generation. By certain conditions distributed cogeneration allows to increase the reliability and quality of power supply and to reduce the cost of electricity for consumers. Therefore, a lot of energy-intensive consumers switched to their own power supply systems, as it turned out to be a competitive technical solution. The total gasification of the country’s regions and the presence of domestic manufacturers of gas turbine and gas piston power plants accelerated this process. Nowadays local power systems are emerging with cogeneration plants are the main source of heat and electricity there. The feasibility justification of the kind and type of generation is determined by many factors, including circuit-mode parameters in the local power system and adjacent network. Local power systems based on the principles of self-balance are proposed to name as energy cells. The integration of energy cells with regional power system increases the technical and economic effectiveness of power supply system for consumers. The proposed power systems transition leads to certain systemic effects. Received effects are depending on functions of distributed generation. This paper explores the impact of scheme and mode factor on the technical effects.


Author(s):  
V. Stepanenko ◽  
Y. Veremiichuk

The implementation of an integrated energy supply system is an effective way to increase energy efficiency, reduce CO2 emissions and increase the use of renewable energy, as well as provide opportunities for energy production, conversion and storage in interconnected infrastructures for energy system operators and consumers. Also, increasing the level of energy efficiency of the energy supply system is one of the important strategies to slow down the growth of demand and mitigate the negative impact on health, the economy and the environment. The article considers the integrated use of energy, the introduction of energy hubs as part of future energy networks and proposes a schematic diagram of an integrated energy supply system. The article presents the results of modeling and computational experiment of ventilation and air conditioning systems in the integrated power supply system, taking into account the technical and operational characteristics of SES, regulatory and technical documents and building codes. According to the results of the study, it is established that the schedule of SES generation and the schedule of electricity consumption by ventilation and air conditioning systems are similar, which leads to a reduction in operating costs and a reduction in the load on the building's power supply system. The scientific substantiation of the integration of the energy storage system into the energy supply structure has been further developed, which will ensure the reliability of the power supply and the efficiency of the solar power plant.


Author(s):  
Aleksey M. BEZNYAKOV ◽  
Aleksey V. NEMIROV ◽  
Gennadiy B. STEGANOV

The paper discusses transmission, reception, conversion and consumption of energy of laser and microwave radiation from Earth or space power plants. It proposes a classification of advanced systems for remote supply of power to spacecraft (SC). It addresses practicability of using remote power supply to SC under various operational conditions. The paper formulates the problem of evaluating the capability of the existing SC power supply systems to receive and convert emissions from additional sources. An analysis of criteria for the quality of pulsed or rapidly varying flow of energy into a SC power supply system. It reviews the structures of typical channels of power consumption in a SC power supply system. An equivalent circuit replacing receivers of pulsed or rapidly changing radiation is described. A math model is proposed for a power consumption channel operating under conditions of intermittent power supply to photovoltaic converters. Math modeling results are presented and analyzed. Key words: space power plant, solar array, onboard power supply system, power consumption channel, voltage converters.


2019 ◽  
Vol 2 (3) ◽  
pp. 152-165
Author(s):  
P. A. Khlyupin ◽  
G. N. Ispulaeva

Introduction: the article reviews the main types of wind turbines and electric power generators designated for wind-driven power plants, as well as new technological solutions. The co-authors have identified the main strengths and weaknesses of wind-driven power plants used as a source of alternative energy. The co-authors have developed an algorithm for selection of a standalone power supply system using a wind-driven power plant.Subject of research: using a comprehensive approach to efficiently design and develop wind-driven power plants with account for climatic and geographic conditions, specifications of wind-driven power plants to be installed.Objective: identification of requirements and specifications needed to develop an algorithm for selection of a standalone power supply system using a wind power plant.Methods: the co-authors have analyzed different types of wind turbines and power generators which are currently in use.Results and discussion: the co-authors present the algorithm for selection of a standalone power supply system using a wind-driven power plant.Conclusion: the algorithm, which is being developed by the co-authors, helps to design an efficient standalone power supply system having a wind-driven power plant.


Sign in / Sign up

Export Citation Format

Share Document